Latest Job Vacancies at Saipem Contracting Nigerian Limited

Job Ref: 402001

Main Responsibility

• Lead in Project planning and execution.
• Company's focal point for project interface management with Clients, Licensors, Partners and Subcontractors.
• Analyse and review contractual documents.
• Implementation of methodologies for risk/opportunity and knowledge management.
• Implementation of the project strategies and project activities planning (Project Execution Plan, Quality Plan, Procurement Plan, HSE Plan, Fabrication Plan, Installation Plan, etc.)
• Approve and supervise planning and cost control activities, implement ing necessary corrective actions needed to achieve established project objectives.
• Supervise engineering and procurement activities in-country and out-country.
• Lead negotiation on variation orders and other commercial and contractual issues
• Ensure collection of project feedbacks and issuance of project's final reports.

Job Requirements and Minimum Required Experience

• A Bachelor's degree or its equivalent in Science/Engineering or related discipline is required. A Master's degree is an added advantage but not a pre-requisite.
• At least 15 years of relevant experience in Offshore Fabrication activities of which 5 years must have been at management level.
• Excellent knowledge of construction and commissioning principles
• Excellent project QHSE leadership skills
• Knowledge of local statutory requirements for oil and gas project.
• Excellent interpersonal relationship with customer focus.
• Pre & post-tender contract management skills
• Good knowledge of Engineering and Procurement systems/ methodologies

Job Ref: 433001

Main Responsibility

• Plan and control production tools, equipment and personnel needed to execute fabrication activities.
• Ensure coordination of all disciplines involved in works up to pre-commissioning I mechanical completion.
• Manage and warehouse project material
• Participate in defining production and maintenance plan.
• Check production work progress, identifying any critical aspects and, where construction activities are subcontracted, requesting necessary actions from subcontractor.
• Participate and lead in fabrication project planning and scheduling, liaising with the various functions involved in the execution of project.
• Assist Commissioning Team during commissioning and start­ up phases.
• Work jointly with HSE team in the preparation of project HSE Plan for construction and fabrication.

Job Requirements and Minimum Required Experience

• A Bachelor's degree or its equivalent in Engineering is required. A Master's degree is an added advantage but not a pre­ requisite.
• At least 15 years of relevant experience in Offshore fabrication activities of which 5 years must have been at management level.
• Excellent knowledge of Fabrication and Commissioning principles
• Excellent QHSE leadership skills.
• Excellent interpersonal relationship with customer focus.
• Pre & post tender contract management skills
• Cost management skills.
• Good knowledge of Engineering and Procurement systems/ methodologies

Job Ref: 432173

Main Responsibility

• Supervise execution of welding activities, checking that machineries and tools are properly used and maintained.
• Prepare and coordinate the detailed programs for the assigned welding activities
• Set-up the proper tools for the management of punch lists, producing adequate reports to monitor the status of the punch list points (open, closed, closure forecast dates)
• Coordinate assigned team, managing interfaces with construction, engineering and commissioning team in closing out punch lists.
• Organize work area for welding activities for improve HSE performance and overall efficiency.
• Provide quantitative data for producing weekly progress reports.
• Coordinate interfaces with prefabrication and erection activities

Job Requirements and Minimum Required Experience

• A Higher Diploma / Degree or its equivalent in Engineering is required.
• At least 10 years of relevant experience in welding and Fabrication
• Knowledge of main Industry standards (ASTM, ASME, ACI, UPC, AWS, etc.)
• Knowledge of the welding processes for offshore/fabrication yard activities (GMAW, SAW, FCAW, PAW, SMAW)
• Knowledge of different international codes/standards to develop and review Preliminary Welding Procedure Specification (PWPS) and Welding Procedure Specification (WPS).
• Knowledge of mechanical and metallurgical testing to be performed during Procedure Qualification Record (PQR) execution and review
• Knowledge of main ND methods and equipment.

Job Ref: 401004

Main Responsibility

• Implementation of the cost control system, elaborating consolidated cost breakdown structure.
• Issues project cost control procedure, cost coding manual and risk management plan.
• Structuring commercial budget according to intercompany scheme, contract and work schedule.
• Coordinate risk management activities and lead in brainstorming and qualitative I quantitative assessment of identified risks and opportunities
• Ensure cost control system effectiveness and cost status is assessed and reported.
• Monitor progress of activities and earned value.
• Provide support during contract changes/claims process, providing cost impact analysis, and keeping cost/revenues forecast updated
• Analyse costs and activities to-date, review estimate to complete, isolating any deviation from baselines; providing advisory and supports Project manager.
• Maintain risk management process, organizing periodic meetings and verifying risk owners.
• Supports Project Control Manager in preparing Project close­ out report and cost feed-back data to Project Control and Commercial Departments.

Job Requirements and Minimum Required Experience

• A Higher  Diploma / Degree or its equivalent in Science /Engineering is required.
• At least 8 years of relevant experience in Project Control and Cost management
• Knowledge of international and national accounting standards and principles
• Knowledge of Contract Management and Commercial Processes (contract evaluation, negotiation and proposal)
• Knowledge of WBS CBS implementation process.
• Knowledge of cost control, planning and document control tools, structure and management Knowledge of SAP

Job Ref: 426202

Main Responsibilities

• Prepare and  issue  preliminary welding documents for project
• Review client's specifications and scopes of work, examine pipe metallurgy and prepare detailed welding procedures
• Coordinate and schedule personnel and systems for qualification of welding procedures and welders.
• Ensure welding traceability information are recorded, maintained and made available in the required format for welding activities.
• Prepare and issue welding documents (Welding Books, WPSs, WPQR, PTW report, Procedures, etc.)
• Monitor Welding Quality through the analysis of the trends of project defect rates and Welders defect rates; proposing corrective and improvement processes.
• Supports welding coordinator and/or project teams on all welding matters
• Evaluate and estimate type and quantity of welding consumables.
• Maintain updated departmental project welding files and database

Job Requirements and Minimum Required Experience

• A Bachelor's degree or its equivalent in Mechanical / Metallurgy / Chemical Engineering is required.
• At least 7 years of relevant experience in welding engineering and quality management.
• Knowledge of the principles of corrosion and corrosion control methodologies
• Knowledge of main applicable Industry materials selection and corrosion control international standards and codes (such as NACE, API, ISO, NORSOK, DNVGL, etc.)
• Knowledge of Standards, Regulation and Codes for Engineering Criticality Assessment (ECA) and Fitness for Service (FFS).
• Knowledge of the Fatigue Analysis principles and testing methods.
• Knowledge of mechanical properties of metals and standard testing
• Knowledge of the principles of metallurgy and materials science.
• Detailed knowledge of NDT Engineering (Specific knowledge of advanced technologies (PA-UT, TOFD, TFM/FMC, Digital RT, etc.)
• Knowledge and interpretation of international codes, client's specification and acceptance criteria

Job Ref: 442007

Main Responsibilities

• Ensure equipment classification for project
• Ensure efficient maintenance planning and identify required resources for activities
• Ensure setup of maintenance system for new assets
• Prepare KPI with regard to maintenance activities.
• Supports asset planning and ensure maintenance cycles improvement
• Ensure training of maintenance operators and manage issues of assets audit.

 Job Requirements and Minimum Required Experience

• A Higher Diploma / Degree or its equivalent in Engineering is required.
• At least 8 years of relevant experience in Assets management and maintenance
• Knowledge of tool and software for assets maintenance and management.
• Knowledge and application of preventive maintenance techniques.
• Knowledge of spare parts management, client supply chain workflow (PR/ PO/ requisition, FAT/SAT, etc.) and warehouse management principles.
• Knowledge of lifting equipment working principles and specific criticalities for cranes, davits, frames, and various lifting devices.
• Knowledge stock management
• Knowledge of  Maritime  Laws and  regulations  Management System (ISM, ISPS, MLC2006)
• Knowledge of adequate Personal Protective Equipment - purpose, use and maintenance
• Knowledge of permit  to work system

Job Ref: 433012

Main Responsibility

• Plan production activities according to project schedule and availability of drawings, materials and personnel.
• Set up and   maintain cumulative project workload
• Manage project materials, production feed and production plan.
• Prepare and estimate feasible WorkPacks for production
• Set up and maintain fabrication databases (material utilization factors, productivity)
• Validate and analyse production feedback in respect to progress, productivity, spent hours and materials, ensuring traceability and final reconciliation

 Job Requirements and Minimum Required Experience

• A Bachelor's degree or its equivalent in Engineering is required.
• At least 8 years of relevant experience in fabrication production project planning.
• Good knowledge of warehouse management
• Knowledge of project technical documents
• Knowledge of fabrication Engineering.
• Good knowledge of fabrication and installation techniques
• Good knowledge of  project  management  tools  &risk management techniques
• Knowledge of SAP and other relevant production planning tools.

Job Ref:433008

Main Responsibilities

• Review contractual documentation for mechanical completion issue and identify project requirements & constraints on installation and mechanical compl.
• Lead in project planning  &  scheduling for mechanical completion and installation activities.
• Prepare and keep up-to-date mechanical completion execution plans
• Supervise I coordinate the preparation of the test pack (mechanical completion dossier)
• Supervise coordinate the preparation of the Mechanical Completion procedure, preparation of all checklists and relevant check sheets.
• Participate in preparing Project HSE Plan for  mechanical completion activities
• Manage and categorize punch list in coordination with other functions engineering/construction/client/quality/hookup/ pre­ commissioning/ commissioning)
• Supervise coordinate, check and test completeness and quality of fabrication in accordance with design documentation and specifications.
• Define and review mechanical  completion consumables  and materials

 Job Requirements and Minimum Required Experience

• A Bachelor's degree or its equivalent in Engineering is required.
• At least 15 years of relevant experience in Offshore fabrication and mechanical completion activities of which 5 years must have been at the level of coordination of Mechanical and Installation activities.
• Project HSE Management
• Project production plan
• Good knowledge of quality control activities
• Knowledge of fabrication Engineering and project management.
• Good knowledge of fabrication and installation techniques
• Good knowledge of project  management tools & methodologies

Job Ref: 442007

Main Responsibilities

• Ensure proper planning, utilization and Assets availability.
• Plan and conducts physical inspections on Assets and inventories.
• Provide technical support on Asset management
• Ensure lifting equipment certification scheduling and renewal
• Control planning and fixed Asset utilization.
• Ensure management fixed fabrication equipment, lifting gears, and fixed infrastructures.
• Schedule and ensure Assets and  Equipment overhauls/maintenance and co-ordinate their implementation
• Manage inspections and maintenance activities on machineries and equipment while respecting fabrication schedule
• Effective implementation of inspections and maintenance plan.

Job Requirements and Minimum Required Experience

• Degree or its equivalent in Engineering is required.
• At least 15 years of relevant experience in Assets Management and Maintenance
• Knowledge of tool and software for assets maintenance and management.
• Knowledge and application of  preventive  maintenance techniques.
• Knowledge of spare parts management, Client Supply Chain Workflow (PR/ PO/ requisition, FAT/SAT, etc.) and warehouse management principles.
• Knowledge of lifting equipment working principles and specific criticalities for cranes, davits, frames, and various lifting devices.
• Knowledge stock management
• Knowledge of  Maritime  Laws  and  regulations  Management System (ISM, ISPS,MLC2006)
• Knowledge of adequate Personal Protective Equipment  - purpose, use and maintenance
• Knowledge of permit to work system
• Knowledge of Quality Management System fundamentals and IS09001

Job Ref: 432174

Main Responsibilities

• Ensure fulfilment of project welding requirements (Fabrications and Welding Specifications, WPS, Welding Books, Project procedures, etc.)
• Coordinate, and organize welding workforce ensuring cost­ effectiveness in welding works, ensuring standards are adhered to as well coordinating and controlling the activities dependent teams of Supervisors, Foremen, Welders, Welding Operators.
• Implementation of processes that would improve welding quality trends; checking project defect rate and welders defect rates.
• Ensure Quality Control activities and NDT activities are performed in accordance to standard, project technical procedures and schedule.
• Interface management with Assets team for preventive and routine equipment maintenance.

Job Requirements and Minimum Required Experience

• A Higher Diploma / Degree or its equivalent in Engineering is required.
• At least 15 years of relevant experience in Welding and Fabrication with at least  5 years spent at Supervisory level.
• Knowledge of main Industry standards (ASTM, ASME, ACI, UPC, AWS,etc.)
• Knowledge of the welding processes for offshore/fabrication yard activities (GMAW, SAW, FCAW, PAW,SMAW)
• Knowledge of different international codes/standards to develop and review Preliminary Welding Procedure Specification (PWPS) and Welding Procedure Specification (WPS).
• Knowledge of mechanical and metallurgical testing to be performed during Procedure Qualification Record (PQR) execution and review
• Knowledge of main ND methods and equipment.
• Ability to read and interpret technical project documents such as isometrics, standards for support, P&IDs, piping arrangements, plot plants, alignment sheet.
• Knowledge of piping and steel structures materials (pipes, fitting, flanges, steel profiles, etc.) and consumables.
• Knowledge of the different materials to be welded for piping and structural steel, such as carbon steel, stainless steel, duplex, galvanized, etc.
• Knowledge of the information Systems for fabrication & hook­ ups(FMS, DACS, Primavera, SAP, etc.)