Latest Jobs at Transtidal Energy Limited

Responsibilities

• Implement and promotes the company health, safety and environmental policy, procedures, regulations and objectives; and ensure, by appropriate monitoring and review, that work is performed in a safe and environmentally sound manner.
• Samples and analyzes drilling mud at regular intervals as well as whenever required in order to ensure smooth and efficient drilling operations;
• Calculate and reports the daily low gravity solids percentages. Tests Oil Based Mud (OBM) upon receiving and reporting same to client
• Plan mud and chemical requirements in accordance with drilling operational requirements;
• Ensure the mud testing equipment are available on location, well maintained and calibrated;
• Reports the daily and cumulative mud utilization and cost, estimation of mud lost, and addition of fluids;
• Maintain an inventory of material and equipment related to area of operation. Advises and supervises rig-crew during transfers;
• Demonstrate commitment to the safety security and health of employees, contractors and service providers, carrying out proactive global Safety Security program that emphasizes through systematic application of safe work practices and use of hazard recognition, intervention and mitigation process in office and field locations
• Follow Operations Safety Security Health and Environment Plan and coordinate with the operation
• Communicate changing conditions to provide adjustments to the Drilling procedures, contributing to the identification of changes in plans, procedures, equipment or personnel in key positions
• Ensure potential pollution control matters are considered and relative contingency plans are understood by rig and third party personnel
• Ensure proper documentation of drilling fluid inventory and management of same.

Requirements

• BSc in Chemical Enginnering
• Clear Kwoledged of drilling fluids aand selection of drill bits

go to method of application »

Responsibilities

• Ensure timely completion of projects in accordance with contractual, legislative, regulatory, company, commercial requirements.
• Project performance with regards to quality, safety, health, environment and safety (QHSES). Safeguarding client’s and company’s interests. Setting-up and leading project team. Coaching and supervising project team members. Liaising with Procurement Coordinators
• As an experienced Engineering Manager, you will play a pivotal role in leading and managing engineering teams to deliver high-quality projects within budget and on schedule.
• You will oversee the entire engineering process from conceptualization to completion, ensuring that all technical aspects are executed with.
• Lead and mentor a team of engineers, providing guidance and support to maximize their potential.
• Develop and implement strategies to optimize engineering processes and enhance project efficiency. Manage the engineering design process, ensuring compliance with industry standards and client requirements.
• Collaborate with other departments such as procurement, construction, and commissioning to ensure seamless project execution.
• Act as a liaison between the engineering team and clients, ensuring clear communication and alignment of project objectives.
• Identify and mitigate potential risks throughout the engineering phase of projects.

Requirement

• B.Eng / B.Tech or HND, PMP Certified

go to method of application »

Job Description

• Reading and interpreting blueprints and technical drawings
• Determining the number of materials required and work completion timeline
• Assembling and installing pipe components and systems
• Welding damaged and broken pipes
• Ensuring that the welded parts are free of any holes and defects
• Adhering to the health and safety guidelines at all times
• Performing pre-welding tasks such as clamping and cutting pipes
• Inspecting if all tools and equipment are in working order
• Operating heavy machinery such as forklift and cranes when needed
• Building and maintaining piping systems
• Securing pipes by using brackets and hangers
• Cleaning the work area before and after work
• Measuring and cutting the pipes accurately
• Install, repair, and maintain pipes using hand tools, power tools, and hydraulic equipment
• Set up, adjust, and operate welding equipment including flux-cored arc and oxyacetylene welding machines, pipe threading machines, and cutting torches
• Seal joints with welding fillers
• Inspect completed welds for internal and external cracks, defects, and imperfections
• Use portable measuring devices, such as calipers, micrometers, and dial indicators
• Provide technical assistance to construction teams and inspectors
• Perform minor maintenance and repairs to repair broken hydraulic equipment
• Perform related duties as assigned.

go to method of application »

Description

• We are looking to recruit a formidable well Engineering team for an upcoming project.

Responsibilities

• Coordinate activities relating to construction estimates and/or material takeoffs of partial or complete projects
• Check vendor shop drawings and construction drawings
• Promote job safety and environmental awareness in construction workmen and other persons at site
• Ensure all construction activities are performed in compliance with the requirements of the relevant specifications, drawings, codes and standards, which form part of the contract Inform Superintendent / Construction Manager about the issues related to work front release and closing of TQs and any drawing change notes
• Ensure that construction personnel are inducted and trained in their roles and responsibilities and ensure that each one is capable of performing their allotted duties
• Assist in the management and oversight of the main construction works contractor and monitor the technical requirements around the mechanical and piping systems
• Check and maintain equipment to comply with quality and safety standards Install, repair and maintain all HVAC equipment and systems for the Campus Broadcast Facilities, including, routine operation and emergency maintenance on all HVAC systems in all buildings including but not limited to
• Carry out daily checks on contractor’s staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications

Requirements

• Associate Degree or Bachelor Degree in Engineering or Manufacturing
• 5 years work experience.

go to method of application »

Responsibilities

• Timely planning of procurement, sales forecasting, inventory control, logistics and distribution.
• Build and manage vendors relationships and interact with relevant government agencies in maintaining high-level service and quality
• Ensure every step of the process function well to avoid costly delays and loss of sales
• Ensure all banking and NAFDAC/regulatory documentation are correct and compliant
• Monitor movement of stocks from the warehouse to customers whether via courier, self-delivery, air cargo etc.
• Periodic evaluation of supply chain processes to ensure the financial objectives of the business are met
• Coordinate continuous process improvement and cost reduction initiatives
• Train, develop and mentor subordinates as well as promote team building among supply chain staff
• Communicate the needs/key objectives to line managers and key personnel
• Manage and maintain effective and lawful insurance provisions relating to import/export activities
• Plan and implement import/export strategy and activities consistent with overall aims and requirements of the organization.

Requirement

• B.Sc in related discipline.

go to method of application »

Job Description

• The preparation of the companies QA manual control and supervision of all amendments and revisions
• Control and the distribution of all the companies quality documentation
• Monitor all quality related activities on the project
• Perform all internal and external audits on behalf of the companies management
• Verify contractor quality requirements are specified to vendors and contractor documentation submittals.
• Attend all pre-bid meetings and coordinate all project requirements with the project bidders.
• coordinate quality steering committee meetings
• Prepare and control project quality system management documentation prior to project commencement.
• Review quality inspection personnel qualifications and training requirements
• Monitor the disposition of all issued nonconformance reports.
• Monitor the progress and effectiveness of the project quality management system. Recommend and implement improvements when required.
• Coordinate all QA/QC activities and report to the drilling supervisor
• Coordinate all quality related performance with drilling activity and report same to the drilling management team.
• Control all achieved documentation upon the completion drilling and completion project
• Liaises with Drilling & Wells teams, and other relevant entities and Contractors to ensure optimization of Management, Inspection, QA/QC and well equipment preparation.
• Maintain synergy with the mobilisation team (supervisors and support staff) to complement the QA/QC Inspection, Validation, issuance and receipt of company and contractor/3rd party equipment / Materials
• Implement quality practices and processes in service centre work delivery
• Check and complete Quality Inspection Checklists as work progresses
• Carry out receiving inspection of all third party materials supplied to the drilling inventory
• Troubleshoot and resolve problems relating to Quality Control aspects.

Requirements

• Bachelor's Degree in Engineering or any Science and Social Scienece discipline
• Clear knowledge of Equipment audit
• Excellent planning and time management skills.

go to method of application »

Job Description

• We are looking to recruit a formidable well Engineering team for an up coming project.
• Positively participating in teams of multi-disciplinary engineers providing completion engineering and testing solutions as part of the well delivery process (e.g., well planning preparation, tubing stress analysis, material selection, tendering, purchasing, QA/QC, CWOP, peer reviews, risk assessment and execution of operations in a timely manner).
• Preparing completion/testing/workover programmes/end of well reports and coordinating other specialist inputs.
• Optimising safe working practices in the development of operational programmes. Being familiar with derogations, management of change, company rules, HAZID/HAZOPs etc.
• Accurately preparing budgets and durations required for completion projects for individual wells.
• Liaising with the Well Examiner to ensure programs are in line with the Well Examination Scheme.
• Updating and following up equipment preparation for routine and non-routine operations.
• Updating and following up the rig cost control for service contracts involved in completion/workover/testing operations.
• Supervising and coaching entry level Engineers.
• Preparing statutory applications/notifications to external agencies, as required, to satisfy the overall completion/testing programme.
• Preparing, reviewing and evaluating tenders for the provision of completion/workover/testing related equipment and services. Providing cost models, technical feedback final recommendations and presentations to contract management committee etc.
• Supervising completion/workover operations on designated rigs. Actively participating in the drilling and wells improvement process.
• Liaising closely with operations to support implementation of engineering work plans and providing live completion/testing engineering support.
• Following up and improving well performance through collaborative evaluation and innovation.
• Supervising small task forces comprising of junior Engineers and contractors to resolve engineering/technical issues and leading operational implementation of solutions. Participating in group wide feedback of new or innovative engineering solutions.
• Prepare programs for all critical rigless activities such as securing wells and production logging operations. Thereafter oversee the implementation of the work by contractors to ensure the objectives are achieved in a safe and efficient manner.
• Ensure that all HSE risks are identified and that measures are put in place to mitigate risks and ensure that Rigless programs and completion programs are prepared accordingly. In particular ensure that HSE requirements are never compromised and that operations are performed in compliance of the Drilling Reference Manual (DRM), the Drilling Department Golden Rules and Corporate HSE requirements.
• Supervise and support the completion engineers with regard to the design and installation of optimum well completions and resolve technical and operational problems as they arise.
• Plan and supervise all production logging activities at oil, gas and water wells using production technology, thermal decay and gamma ray neutron tools (PLT, TDT and GNT). Responsibilities include gathering data, preparing program and overseeing work of contractor through to satisfactory completion of program.
• The incumbent also has responsibility to plan and program critical rigless operations such as well killing and production logging.
• Carry out peer assist and review of job procedures, completion design, job preparation and project readiness.
• Involved in periodic technical webinars to mentor and coach younger Engineers on industrial best practices, lessons learnt and new technologies.

go to method of application »

Description 

• We are looking to recruit a formidable well Engineering team for an upcoming project.

Responsibilities

• Evaluating offset data before the start of drilling
• Analyzing, evaluating and describing formations while drilling, using cuttings, gas, formation evaluation measurement while drilling (FEMWD), and wireline data
• Comparing data gathered during drilling with predictions made at the exploration stage
• Advising on drilling hazards and drilling bit optimization
• Making decisions about suspending or continuing drilling. Ultimately, it’s the wellsite geologist’s responsibility to decide when drilling should be suspended or stopped.
• Advising operations personnel both on the rig and in the onshore operations office about any pertinent geological or drilling information as it arises.
• Supervising mudlogging, MWD (Measurement while drilling)/LWD (logging while drilling), and wireline services personnel, and monitoring quality control in relation to these services.
• Keeping detailed records, writing reports, completing daily, weekly and post-well reporting logs, and sending these to appropriate departments.
• Maintaining up-to-date knowledge of LWD and MWD tools and status of all equipment onboard and in transit to make sure the equipment is available and in working order when it is needed.
• As a single point of contact between the Exploration team and Drilling team during drilling operations.
• Monitoring the formation evaluations program with massive communication to the Wellsite Geologist on the rig site.
• Preparing the Geological Well Program and presenting the materials during the Pre-spud meeting to drilling contractors.
• Participating in the procurement process, especially for drilling and formation evaluation contractors.
• Producing a flow chart for the coring protocol and formation evaluations program (i.e., Mud logging, LWD/MWD, Wireline logging, Bio stratigraphy, core analysis).
• Managing all data relating to geological data and formation evaluation from drilling operations.
• Responsible for the daily geological report to update the G&G team during drilling operations.
• Producing the final well report, including a composite log.
• The incumbent will support the Senior Wellsite Geologist by performing all assigned tasks in relation to (but not limited to):
• Planning and supervision of geological operations in the course of drilling
• Adherence to safety protocols, Company Rules (CR), Standard Operating Procedures (SOP), and training related to the role. Ensuring service company personnel being supervised are equally HSE compliant in training and service delivery.
• Reviewing quality, accuracy, and unambiguity of geoscience data acquired at the Wellsite and associated reporting (Shows/Cuttings descriptions, well composite logs and Final Well reports, Post-Mortems, REX, etc.).
• Ensuring timely dispatch of Wellsite reports (e.g., Daily Geological Reports) and geoscience data to Town.
• Anticipating, correlating, and reporting of Well and geological events (Faults, reservoir tops, OVP zones, etc.).
• Contribution to the improvement of data acquisition Standard Operating Procedures (SOP) and best practices.
• Supervision of the Mud Logging crew to ensure that Cutting’s descriptions and Shows identification/descriptions are consistent with best practices, that Sensors/equipment are functional, and that real-time data is reliable.
• Ensuring Well samples: Cuttings, fluid, Cores, etc. are handled, packaged, stored, and shipped as per SOP.

Requirements

• Interested candidates should possess a Master's Degree in relevant fields with 5 years work experience

go to method of application »

Job Description

• Provide sound drilling engineering methods and procedures to be used on assigned drilling problems.
• Execute and accomplish assignments and studies in areas outlined in the scope, assuring conformance to overall objectives of all phases of drilling operations in areas including drilling penetration rate optimization, new drilling technology, and drilling studies.
• Deliver technical support for various types of drilling wells including complex multi-lateral and extended reach (ERD) horizontal oil and gas wells, HPHT gas wells, offshore and deep water, and unconventional wells. Wells include power water injections and producing wells, exploration wells and all kind of workovers including HST’s.
• Analyze advanced drilling data and the performance of new or existing drilling techniques to determine a need for or benefit from studies, recommendations, and/or modifications with respect to unit costs, and operating efficiency consistent with established operations.
• Extend training and technical support to junior engineers and ensure the sustained meeting of regional and global standards, practices, and procedures.
• Participate in the detailed planning of drilling operations, in collaboration with other professionals such as reservoir engineers, geologists and geophysicists. Also evaluate geological and engineering data to determine optimal well locations, appropriate drilling techniques and necessary equipment.
• Responsible for selecting the appropriate drilling equipment based on the characteristics of the well, geological formation and the operational constraints. Also be able consider factors such as well depth, reservoir pressure, formation composition and safety regulations.
• Supervision of drilling operations, including setting up equipment, controlling drilling parameters, monitoring safety and resolving problems.Ensure that operations are carried out in accordance with safety procedures and applicable regulations.
• Optimization of the drilling process, suggesting technical improvements, such as the use of new drilling techniques, the application of specific drilling fluids or the adoption of directional drilling methods to reach several reservoir zones from a single well.
• The drilling engineer will be responsible for identifying and resolving problems encountered during drilling operations, such as formation stability problems, mud loss incidents or mechanical complications. Should also work to minimize risks related to worker safety, the environment and equipment.
• Ensure Data Collection and Reporting, and analyzing drilling data including operational parameters, drill logs and rock samples. He prepares detailed reports on drilling operations, results achieved and lessons learned to inform future decisions.
• The drilling engineer will work closely with other professionals in the petroleum industry, such as geological engineers, production engineers and technicians, to integrate technical and geological aspects into planning and execution. drilling operations.

Requirements

• B.Sc in Mechanical Engineering
• IWCF level 4.

go to method of application »

Responsibilities

• Proficient in use of well design tools including WELLCAT,Compass, and well plan
• Establishing and administering drilling and service contracts;
• Prepare well data sheets
• Design and select well-head equipment and other dirlling accessories in accordance with well design
• Designing directional well paths (horizontally or multi-laterally, as appropriate);
• Contribute to conceptual field development design
• Working with multidisciplinary professionals to evaluate the commercial viability of the well and monitor progress during drilling;
• Coordinate and supervise the work of the drilling team;
• Ability to undertake engineering design and the planning of wells (including development work);
• Obtaining relevant data, carrying out engineering analysis on site and recommending necessary actions and writing up reports;
• Monitoring the daily progress of well operations;
• Drawing up drilling programmes, taking account of desired production flow rates;
• Adhering to environmental protection standards, in some cases through direct discussion with local governments to ensure compliance with legislative requirements;
• Monitoring safety and ensuring the good maintenance of the well
• Keeping track of current daily costs, comparing actual costs with expenditure proposals and recommending cost-effective changes;
• Liaise with specialist contractors and suppliers, such as cement companies or suppliers of drilling fluids
• Monitor safety and ensure the good maintenance of the well
• Design directional well paths (horizontally or multi-laterally, as appropriate)
• Challenge well designs to meet subsurface goals; delivered objectives for all 8 well projects on time, in budget, and with no HSE issues.
• Gain consensus and approval for numerous Authorizations for Expenditures with cost effective budgeting, detailed reporting, and strong presentation.

go to method of application »

Description 

• We are looking to recruit a formidable well Engineering team for an up coming project.

Responsibilities

• Daily drilling activities: Supervising and coordinating the execution of drilling activities daily, including the operation of onshore andoffshore drilling rigsand equipment such as (mud pumps,solid control equipment, etc..)
• Communication and coordination: Facilitating effective communication between drilling crews, contractors, service providers, and other relevant parties to ensure the seamless flow of information and resources.
• Safety procedures: Enforcing and promoting adherence to safety rules and regulations to create a safe work environment for all personnel involved in drilling operations.
• Optimization and efficiency: Identifying opportunities for process improvement and implementing strategies to optimize drilling operations.
• Supervise the execution of the drilling/workover/testing/completion program
• Plan ahead to determine future requirements for drilling equipment and consumables
• Liaise with the logistic base to communicate future supply / back-load requirements
• Report progress made on a regular base with the superintendent in town
• Prepare and provide drilling, rig and well data to project management office
• Discuss program changes with the superintendent
• Liaise with other departments (e.g. production) to discuss and schedule concurrent operations.
• rig moves,operational success of all operations on the rig; drilling, testing, tree running, workover, etc.
• Ensure that all operations are conducted in compliance with all HSE standards and regulations
• Ensure that the drilling operation is conducted in the most cost effective manner
• Ensure all materials and services are ordered timely
• Ensure that all materials received are of the correct specification (QA/QC).
• Ensure that rental items are returned to shore timely
• Ensure that the job tickets presented for signature are completed properly and times and quantities are correct
• Ensure that conflict between departments is solved rapidly and professionally taking into account the overall interest of the company.
• To ensure the efficient execution of drilling activities, a drilling supervisor follows a systematic approach and implements various strategies.
• They will also oversee the bi-weeklypressure and function test of the BOP, sign off on records and pressure charts, and ensure proper certification is available on-site.
• It is essential for the rig supervisor to review the drilling program before the start of operations. This will assist in ensuring equipment and personnel are capable of error-free work.
• Maintain Regular communication and clear instructions to ensure everyone is on the same operation sequence.

go to method of application »

Job Responsibilities

• Prepares annual budget (both Corporate & Partner) for entity in conjunction with technical responsible
• Prepares revised forecast information based on latest work scope
• Participates in NAPIMS Sub-Committee meetings to defend Budget / Performance in order to achieve thenecessary approvals
• Prepares all necessary documentation for the month end closure (manual accrual’s, SKF’s, etc.) to ensure anaccurate financial performance
• Ensures all tasks are carried out in order to achieve SOX compliance
• Prepares monthly cost report with variance analysis to help technical responsible manage their budgets / costs
• Provides monthly information for the NAPIMS cash call to ensure sufficient funding for the activities
• Process and verify invoices to ensure timely payment
• Schedules meetings monthly to discuss reports and finance-related issues with Technical responsible.
• Ad hoc variance analysis for District management / Corporate Finance
• Prepares annual budget (both Corporate & Partner) for entity in conjunction with technical responsible
• Prepares revised forecast information based on latest work scope
• Participates in NAPIMS Sub-Committee meetings to defend Budget / Performance in order to achieve the necessary approvals
• Prepares all necessary documentation for the month-end closure (manual accrual’s, SKF’s, etc.) to ensure an accurate financial performance
• Ensures all tasks are carried out in order to achieve SOX compliance
• Prepares monthly cost report with variance analysis to help technical responsible manage their budgets / costs
• Provides monthly information for the NAPIMS cash call to ensure sufficient funding for the activities
• Process and verify invoices to ensure timely payment
• Schedules meetings monthly to discuss reports and finance-related issues with Technical responsible.
• Ad hoc variance analysis for District management / Corporate Finance

Specific:

• Periodic reconciliation of technical cost sheets with SAP Values to ensure adequate follow-up of daily drilling cost.
• Creation of RFS purchase orders and maintenance of schedules for proper cost follow-up.
• Reporting to the Senior Cost Controller, support co-ordinate, perform and control the activities of the Project Cost Control function. To prepare, analyze, evaluate, process and present information and documentation relating to the Project budget and cost control activities.
• Control and input the commitments data means and in particular:
• Collecting and process all Timesheets, Travel expenses data and documents relating to the team members and contractors.
• Register the project invoices in the project cost control system.
• Provides correct expense figures as requested to be given to Heads of Department.
• Ensures administrative and operation cost figures are correctly recorded and relevant expenses accounted.
• Ensures the accurate recording of all sundry and consumable goods purchased.
• Provides daily cost of all sundry and consumable goods issued to various hotel departments.
• Monitors daily input of stock movement (purchasing, receiving, issuing, transfers) into computer system on a cost basis.
• Analyzes food and beverage costs weekly.
• Prepares timetable and stock sheets for regular stock takes and coordinates timely counting and valuation.
• Approves invoices and statements for purchase prices as detailed from purchasing.
• Researches costs for printing menus, sales kits, stationary, brochures, fax paper, etc.
• Ensures sufficient supply of all stationery items required for efficient operation.
• To co-operate with all organizations and persons engaged in activities designed to enhance the development and standing of purchasing.
• To consider and set-up the Economic Ordering Quantity (EOQ).
• Ensures work area is clean and well organized.
• Maintains correct security procedures according to hotel policy.
• Provides assistance to guests in all hotel emergency evacuation and medical procedures.
• Reports any health or safety hazards to the General Manager.
• Performs other duties that may be required by the General Manage.

go to method of application »

Job Description

• Perform periodic evaluations for the Drilling Supervisors, Drilling Engineers and Drilling Technicians.
• Monitor drilling expenditures on a daily basis with the goal of drilling the most cost effective wells possible.
• Review equipment planning with Drilling Engineer, Drilling Supervisors and the Material & Logistics Coordinator to ensure timely equipment arrivals and to eliminate equipment overstocking.
• Coordinate with the Drilling Engineer, Material & Logistics Coordinator & Drilling supervisors the timely arrival of drilling equipment and services on wellsite.
• Ensure that wells are drilled and completed in a manner that meets the objectives of the Reservoir, Production, and Geological departments.
• Encourage and support HSE training and implementation of new procedures and guidelines. Attend the bi-weekly safety meeting in the field.
• Prepare monthly drilling operations reports
• Technical review of all drilling programs and final well reports.
• Perform wellsite inspections to ensure that safety programs are conducted and monitored by the drilling contractors in a manner consistent with HSE policies in conjunction with the Senior Drilling Supervisors’ site specific HSE plan.
• Ensure that well platforms are constructed to specifications, in a time and cost effective manner.
• Liases with subsurface geology and production teams on sub-surface activities
• Define phase activities (well design and drilling programme), including casing design, well trajectories development, BHA design (including drill stem hydraulics optimization and hole cleaning analysis).
• Execution phase suppport - Well operations monitoring, operations optimisation (inluding drill stem hydraulics optimisation, hole cleaning analysis, torque and drag analysis). Post well reviews capturing lessons for implementation on future/subsequent wells, among others.
• Supervising the day-to-day activities and monitoring of the rig drilling & completion operations.
• Budget preparation to obtain approval for funds for for-casted projects (Drilling Year Plan).
• Initiate Guidelines & Procedures for daily field operations.
• Responsibilities includes overseeing drilling operation, well engineering, design & planning, cost monitoring & budget, procuring services & equipment, Technical & Commercial evaluation of Tender’s. Supervise T & C tender evaluation & contracting procedures for JV Operations.
• Supervise Team of Drilling & Completion Engineer’s to deliver set target’s for the year.
• Use of Latest Rotary Steerable & LWD Technology on wells ranging 9000ft-11,000ft TVD with over 1000ft lateral pay.
• Complete both dual & single concentric well bores, slotted liners, open hole completions.
• Review daily reports and ensure that work is carried out as per program and safely.
• Visit rig once a month to ensure that crew adhere to HSE procedures.
• Ensure that well control equipment installation, maintenance and standard are the same across all rigs.
• Carried out audit of well control procedures and practices and ensure that equipment’s meet Company specifications.
• Involved in the design of wells and monitor the day-to-day drilling operations, involved in well control equipment standardization.

go to method of application »

Responsiblities

• Safety is a core value at Stantec. You must understand and comply with all health and safety rules and regulations for Stantec and its clients.
• As part of the Mining team, you must make a personal commitment to preserving employee health and safety. Demonstrate this commitment through your interactions and designs. Your commitment will help achieve our goal of zero harm.
• Work with engineers and designers on projects including scoping, studies, engineering, calculations, details, take-offs, and documentation. Provide support during construction and commissioning.
• Provide engineering support to meet client needs and incorporate suggestions for future requirements efficiently. Attend client meetings, including onsite. Correspond directly with clients.
• Regularly interface with other teams to execute projects, develop resource plans, identify staffing issues, and properly staff projects.
• Organize, lead, and develop teams for success administratively and technically. Support team career development including performance management. Communicate expectations and measure performance. Coach, train, and mentor team members across offices.
• Identify recruitment needs and manage hiring, orientation, and onboarding.
• Design with safety, constructability, and sustainability in mind. Ensure codes, regulations, and guidelines are met through periodic review.
• Review and develop piping standards and technical framework.
• Supervise and approve construction activities. Coordinate inspections, submissions, drawings, and documentation.
• Implement standardized construction processes, procedures, manuals and systems. Execute control systems for each activity.
• Organize, coordinate, and supervise construction activities on schedule and budget. Resolve issues through discussion.
• Assist Warehouse with inspections and maintenance.
• Handle all Mechanical Construction activities including investigations, surveys, etc.
• Work closely with other Construction Supervisors.
• Report on site issues, events, progress, trends, and recommendations.
• Manage required deliverables including scopes, isometrics, plans, lists, photos, and bills of materials.
• Coordinate with client and construction to ensure requirements are addressed consistently.

Requirements

• Bachelor's and University Degree in Engineering / Mechanical Engineering / Technical / Construction