Career Opportunities at Saipem Contracting Nigeria Limited

Reference Code: HLSP

Responsibilities/Requirements

• Organize, coordinate and control execution of handling and lifting activities, performed by subcontractors and company operations.
• Ensure the supervision and monitoring of the Handling and Lifting activities performed, subcontracted or handled by direct hires.
• Create and keep updated lifting and handling equipment register with all the necessary information: certification, maintenance, colorcoding, etc.
• Ensure that lifting activities are covered by lifting plans where applicable
• Promote safe work practices and environmental protection, ensuring that safety and quality standards are respected

Qualification and Experience

• A degree in Mechanical Engineering or its equivalent with a minimum of 10 years relevant experience in the Energy Sector or Construction sector.

go to method of application »

Reference Code: HLSP

Slot: 2

Responsibilities/Requirements

• Organize, coordinate and control the execution of electrical works, performed by subcontractors or by direct hiring, ensuring the management of the interfaces with all construction disciplines and engineering departments, overseeing the availability of the construction materials and equipment and verifying that works are correctly carried out in accordance with project documentation and schedule.
• Ensures correct and cost effective performance of electrical construction works in accordance with the established operating programs, coordinating and controlling activities performed by the dependent teams.

Qualification and Experience

• A degree in Electrical Engineering or its equivalent with a minimum of 8 years relevant experience in the Energy Sector.

go to method of application »

Reference Code: ELCTLDR

Responsibilities/Requirements

• Lead the Electrical Engineering activities in accordance with Project requirements within assigned budget, time schedule and quality standards.
• Ensure compliance with all Project interfaces and supervise in/out information flow

Qualification and Experience

• A Bachelors degree in Electrical/Instrumentation Engineering with 8 years experience.

go to method of application »

Reference Code: DMQC

Responsibilities/Requirements

• Orderly collect and manage/check documents certifying test, controls and inspection documents, ensuring that all dimensional and measurement related records are properly retrievable within the final As-Built dossier
• Assist engineering functions during constructability analysis with regard to tolerances definition and consistency.
• Ensure all measurements during fit up and after weld of assembly area of prefabrication, subassemblies, assemblies items, structures.
• Ensure all measurements during preparation of assembly area and support points
• Ensure all measurements during and after welding are properly documented, (and PWHT, if any)
• Ensure proper calibration of all measuring equipment
• Ensure the correct implementation of the approved Quality Control Plan/Inspection Test Plans, witnessing inspection and collecting relevant Quality Control records

Qualification and Experience

• A Bachelors degree in Civil Engineering with 6 years experience.

go to method of application »

Reference Code: CTSS
Slot: 3

Responsibilities/Requirements

• Support Static Equipment Lead in all the technical matters and interface with other disciplines.
• Participate in the preparation of Material Requisitions related to Static Equipment.
• Review clients technical documentation and requirements on Static Equipment.
• Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work.
• Assist project management in technical interface with client.
• Ensure technical support during plant construction, pre-commissioning and commissioning phases
• Ensure technical support during plant construction, pre-commissioning and commissioning phases
• Prepare detail engineering documentation in compliance with process requirements and technical specifications (equipment mechanical data sheets, etc.)
• Execute studies and engineering relevant to static equipment

Qualification and Experience

• A degree in Mechanical Engineering with a minimum of 8 years experience.

go to method of application »

Reference Code: CTDPEGR

Responsibilities/Requirements

• Design Integrated CP systems (and associated monitoring) for onshore structures and pipelines and organize work of personnel assigned to cathodic protection site operations, ensuring that approved specifications/procedures are complied with.
• Defines Calculation methodology/Protection method definition: sacrificial or impressed current.
• Assists during MPQT, review for approval of subcontractor documentation.
• Commissioning and startup operations and manages CP site survey subcontractor on site.

Qualification and Experience

• A degree in Electrical Engineering or its equivalent with a minimum of 8 years’ experience.

go to method of application »

Reference Code: ASTWE

Responsibilities/Requirements

• Ensure welding process equipment and pipeline equipment installation and maintenance onboard as per project requirements
• Collect feedback information regarding functionality/usability/reliability of Welding production equipment, production equipment and Pipeline equipment in order to propose improvements.
• Hold Company certification, training matrix and functional matrix

Qualification and Experience

• A degree in Mechanical or Materials Engineering with a minimum of 8 years in experience in welding equipment management.

go to method of application »

Reference Code: ASTC

Responsibilities/Requirements

• Manage approved projects for development of new Engineering and Construction vessels and equipment
• Plan/perform the management, maintenance and efficiency of fleets, relevant yard equipment and fixed structures, logistic bases and mobile equipment.
• Give support to project in defining standard procedures, coordinating operating methods as regards vessels, equipment and yards.
• Coordinate interface between operating methods and operational management for hydro testing, pre commissioning, diving/survey subsea activities including guidelines, best practices and disciplinary support for in house/subcontracted activities
• Perform/contribute to worldwide operational/maritime manning of vessels in its remit
• Coordinate and track project materials and equipment.
• Perform/contribute to worldwide operational/maritime manning of vessels in its remit
• Coordinate and track project materials and equipment.
• Perform assets and equipment technological evolution; identifying and developing initiatives to consolidate and improve competitiveness.
• Implement/perform risk and opportunity and knowledge management methodology/tools during execution phases

Qualification and Experience

• A degree in Mechanical Engineering, 10 years of relevant experience in the Energy sector

go to method of application »

Reference Code: SMAUT

Responsibilities/Requirements

• Perform Instrumentation 3D modelling design activities and participate in 3D Modelling reviews
• Initiate P and ID general legend sheets for equipment, piping and instrumentation.
• Create typical piping arrangements to be standardized for P and ID homogenization and consistency
• Ensure development of P and ID based on process PFD cut and apply proper engineering general criteria and guidelines
• Participate in the collective P and ID review with Process and Engineering Disciplines
• Ensure total traceability of P and ID modifications
• Participate in site surveys for revamping projects to collect as-built information on PIDs, when necessary
• Perform thermal design of shell and tubes heat exchangers and develop thermal datasheets accordingly
• Be involved in the review of vendor documentation (PFDs, process datasheets, narratives, P and ID5, utility balances, etc)

Qualification and Experience

• A Degree in Chemical/Process Engineering with a minimum of 5 years relevant experience in the oil and gas industry..

go to method of application »

Reference Code: MCHWKS

Responsibilities/Requirements

• Perform Instrumentation 3D modelling design activities and participate in 3D Modelling reviews
• Initiate P and ID general legend sheets for equipment, piping and instrumentation.
• Create typical piping arrangements to be standardized for P and ID homogenization and consistency
• Ensure development of P and ID based on process PFD cut and apply proper engineering general criteria and guidelines
• Participate in the collective P and ID review with Process and Engineering Disciplines
• Ensure total traceability of P and ID modifications
• Participate in site surveys for revamping projects to collect as-built information on PIDs, when necessary
• Perform thermal design of shell and tubes heat exchangers and develop thermal datasheets accordingly
• Be involved in the review of vendor documentation (PFDs, process datasheets, narratives, P and ID5, utility balances, etc)

Qualification and Experience

• A Degree in Chemical/Process Engineering with a minimum of 5 years relevant experience in the oil and gas industry..

go to method of application »

Reference Code: NDTCOD
Slot: 2

Responsibilities/Requirements

• Manage NDT team by allocating personnel on projects or site activities, perform induction hands on job and, in case of needs, can request training and/or new recruitment of NDT personnel to Corporate functions
• Provide feedback about specific occurred cases to corporate functions so that can be used as case study in R&D.
• Provide answer and advice on all NDT matters as required by projects.
• Deal with Third Parties, Quality Control Manager, Supervisors on site and Corporate functions for what concerns NDT matters
• Follow and liaise with Corporate/Engineering for NDT qualification
  Session
• Provide NDT techniques, write and revise NDT procedures following QC NDT Templates and liaising with Corporate and Engineering
• Ensure the coordination and supervision of NDT activities of projects for the area of competence

Qualification and Experience

• A degree in Chemical/Mechanical Engineering or Nuclear physics with a minimum of 10 years’ relevant experience. ASNT NDT Level III certificate is required.

go to method of application »

Reference Code: OGAS
Location: Nigeria
Slot: 3

Responsibilities/Requirements

• Experience in the Utilities and Offsite area both onshore and offshore
• Proven experience in the preparation of FEED and execution of EPC for large projects
• Knowledge and experience in simulation programs (i.e. HYSYS) both for steady and dynamic states and specific commercial tools (Flarenet, Flaresim)
• Preparation of Utilities Flow Diagrams, Simulations for Heat and Material Balances, Process sizing calculations (Drums, Columns, Pumps, Piping, etc.), Process Data Sheets for equipment, Duty specification for packages (Water treatment packages, etc.).
• Process sizing calculations for Vessels, Columns, Pumps, Compressors, Heat Transfer Equipment, Piping, Control Valves, Safety Valves, etc.
• Preparation of Process Flow Diagrams, Heat and Material Balances, Material Selection Diagrams, Process Data Sheets for equipment and instrumentation, Cause and Effect Matrix

Qualification and Experience

• A degree in Gas Engineering/Petrochemical with 7 years relevant experience.

go to method of application »

Reference Code: OCM
Location: Nigeria

Responsibilities/Requirements

• Ensure the direction of Plant project construction activities, both performed by subcontractors or in Direct Hiring, supervising multidisciplinary construction works according to contract requirements and project objectives
• Ensure the implementation of HSE procedures for construction and pre-commissioning of plants
• Give guidelines for the definition of construction strategies, such as subcontracting plans, logistic and constructability studies, during the various stages of the project
• Review of contractual documents construction related and interfacing with other project functions.
• Participate in defining the overall project planning and scheduling for construction activities, with the support of the expertise of construction organization key positions
• ensure that activities are carried out within the planned time and costs, coordinating and instructing construction team accordingly and intervening with corrective actions in case of deviations or difficulties
• Analyze all information regarding the progress of works, indicating the causes of deviations between the program and the work carried out and propose solutions and/or request instructions to overcome these problems
• Ensure effective interdisciplinary coordination verifying adequacy and consistency of construction strategies.
• Coordinate the execution of multidisciplinary construction activities and manage activities assigned to subcontractors, providing the guidelines for execution of the works and monitoring adequacy of manpower and equipment to manage construction activities
• Manage interface with Clients for all matters relevant to construction activities
• Manage interface with engineering departments for drawings and materials availability
• Ensure/manage the Mechanical Completion activity by System & Sub-System as clearly identified by Commissioning Manager, monitoring the schedule, Quality certification, punch list, up to final handover to Commissioning /Client

Qualification and Experience

• A degree in Engineering with a minimum of 10 years’ relevant experience in the energy sector.

go to method of application »

Reference Code: OSWS
Location: Nigeria

Responsibilities/Requirements

• Supervise the Set up and execution of assigned engineering activities such as detail design verification and studies relevant to Steel Structures
• Assist subcontractors or assigned resources in the interpretation of the drawings and providing support
• Prepare design specifications.
• Verify that works are correctly carried out in accordance with project specifications, highlighting any engineering problems encountered in the field
• Develop studies and calculation notes for steel structures and structural steel buildings.
• Measure the progress of the works carried out
• Prepare MTO, BOQ, S.O.W. and technical specification for steel structure sub-contract.
• Prepare technical documentation for steel structure material requisition and assist procurement department in the technical evaluations.
• Monitor steel vendors to follow up engineering activities in order to minimize interface time.

Qualification and Experience

• A degree in Civil/Structural Engineering with a minimum of 8 years relevant experience.

go to method of application »

Reference Code: PSLE
Slot: 4

Responsibilities/Requirements

• Development of engineering activities for pipeline transport/plant system (i.e. well heads, production and injection gatherings, pipelines, compressor and pumping stations and pipeline receiving terminals and storage)
• Development of flow assurance simulation for single and multiphase transport in pipeline for pipeline sizing and transport system process scheme definition

Qualification and Experience

• A Mechanical/Chemical/Petroleum Engineering Degree with 5 years of experience and exposure to Process Design relevant to Oil & Gas activities.