Jobs at BGI Energy Services Limited

Responsibilities

• Watch the hot work and surrounding area.
• Have and maintain line-of-sight to hot work being watched
• Inspect extinguishing equipment before the hot work starts – Check connections, hydrants, hoses, extinguishers or other components for operability, discoloration, corrosion, or wear. Verify pressure is Ok, and tag is current.
• Wet down areas where combustibles may be present, to reduce chance of ignition.
• Ensure containment and barricading is sufficient to control slag and sparks.
• Verify that a gas meter is present at the hot work at all times. If LEL readings change (beyond meter “drift”) or the meter goes into alarm, hot work must be shut down.
• Only try to extinguish fires when they are small enough to handle with your on-hand fire extinguishing equipment.Call your site emergency response number immediately prior to trying to extinguish fire.
• All fires, even flash-fires, must be reported to the site emergency operations center.
• Stop (and don’t start) unauthorized hot work.
• Do not perform any other duty that might interfere with primary duties as Fire Watch.

Requirements

• HND, B.Tech or B.Eng in Engineering or related discipline.
• Minimum of 2- 5 years of relevant engineering experience in the oil and gas industry
• OPITO BOSIET.

go to method of application »

Responsibilities

• Participate on welding, Welders and Welding Operators qualifications procedure qualification, including Mechanical Testing when required.
• Review and approve the NDT procedures and Operators in liaise with the CTR’slevel.3
• Review and interpret all or part of radiography films in addition to the third-party interpretation.
• Cross check NDT (UT, PT, MT) specially AUT
• Monitor performance of Production Tests and NDE in terms of quality and frequency, ensuring conformity with relevant specifications and codes
• Supervise and witness inspections, check reports and documentation issued by inspectors and verify the collection of required Quality Records
• Ensure that Contractor maintains accurate welding/NDT records throughout the contractual period
• Ensure that acceptable standards of testing are maintained and alert QA/QC Lead if repair rates are above acceptable level
• Ensure timely delivery of Preliminary welding tests and NDE documents to enable the procurement and construction processes to progress, with the objective to reduce costs without impacting the schedule or the required level of quality and safety.
• Keep, monitor and follow up as necessary and maintain complete record(s) concerning the execution of the works.
• Ensure that all statutory authority / permits / design approvals are available on site for construction.

Requirements

• OND, HND, B.Eng in Engineering or related discipline.
• Experience in carrying out PAUT inspection.
• Proficiency in the use of RMS and Rscan equipment.
• Availability of all necessary documentation including SBC and valid OSP.
• OPITO BOSIET.

go to method of application »

Job Summary

• Demonstrate high understanding and skills in painting under complex situations.
• He must pay attention to details and act professionally in carrying out his duties.
• He must be able to handle painting equipment and adhere to safety measures with little or no supervision.

Job Requirements

• SSCE and Trade Test or Apprenticeship Certificates
• Candidates must have at least 2-5 years of experience, preferably in the oil and gas industry.
• OPITO BOSIET.

go to method of application »

Responsibilities

• Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.
• Work closely with project managers, engineers, and stakeholders to ensure all aspects of the project are aligned and progressing smoothly.
• Provide engineering expertise and technical guidance throughout the project lifecycle.
• Maintain thorough documentation of project activities, including plans, designs, reports, and updates.
• Monitor project costs, manage budgets, and report on financial status.
• Identify potential risks and develop mitigation strategies to ensure project success.
• Ensure all project activities meet or exceed industry standards, regulations, and company quality guidelines.
• Regularly update stakeholders on project progress, challenges, and changes in scope.
• Address technical issues and project challenges, providing solutions to keep the project on track.

Requirements

• Candidates should possess a Bachelor’s Degree in Engineering (Mechanical, Civil, Electrical, or related).
• Minimum of 5 years of experience in project engineering or a related field.
• Proficient in project management software (e.g., MS Project, AutoCAD), with a strong understanding of engineering principles.
• Excellent verbal and written communication skills, with the ability to convey technical information.
• Strong leadership and team collaboration skills.
• Ability to troubleshoot issues and think critically to solve complex problems.
• Proven ability to manage multiple tasks and meet deadlines.
• OPITO BOSIET

go to method of application »

Job Summary

• The Structural Fitter assembles, installs, and repairs structural components and equipment in construction, manufacturing, or industrial settings, ensuring precision and safety.

Key Responsibilities
Assembly and Installation:

• Interpret blueprints, diagrams, and specifications.
• Assemble and install structural components (e.g., beams, columns, pipes).
• Ensure accurate alignment and secure connections.

Fabrication:

• Cut, Mark, weld, and shape materials.
• Fabricate components according to specifications.

Requirements

• NABTEB / OND / HND in Civil or Mechanical Engineering or related discipline
• OPITO BOSIET
• 3 - 5 years cognate experience in mechanical fitting, preferably in the oil and gas industry
• Excellent problem-solving and analytical skills
• Ability to work independently and as part of a team.

go to method of application »

Job Summary

• We are seeking a skilled and experienced Mechanic Fitter to join our team. The ideal candidate will have a strong background in Mechanical Engineering and a proven track record of repairing and maintaining mechanical equipment.

Requirements

• Candidates should possess a NABTEB / OND / HND in Mechanical Engineering or related discipline
• OPITO BOSIET
• Minimum of 3-5 years cognate experience in mechanical fitting, preferably in the oil and gas industry
• Excellent problem-solving and analytical skills
• Ability to work independently and as part of a team.

go to method of application »

Job Summary

• Professional Painter/Plumber looking to secure a position with a reputable company.
• Experienced in painting outdoor and indoor surfaces made of all materials such as wood, concrete, or brick
• Physically capable of standing, sitting, bending, and lifting
• Ability to paint while standing on scaffolding or suspended
• Efficient in removal of old paint, graffiti, or other markings
• Capable of performing minor repairs such as filling holes or replacing wood
• Knowledge of different types and shades of paint to use for specific projects
• Knowledge of Plumbing works.

Job Requirements

• SSCE and Trade Test or Apprenticeship Certificates
• Candidates must have at least 2-5 years of experience, preferably in the oil and gas industry.
• OPITO BOSIET.

go to method of application »

Responsibilities

• Manage all project documentation, including engineering/technical, correspondence, project management, commercial, and legal records generated by the company, clients, and subcontractors.
• Maintain and enforce document control processes, procedures, and specifications to ensure accurate records of all official project documentation.
• Ensure the proper registration, categorization, and filing of incoming and outgoing documents.
• Regularly update and maintain document tracking logs.
• Perform quality control checks to ensure documents comply with the company and client standards, as well as project management systems.
• Maintain a structured and accessible file system for all project documents.
• Expedite and monitor the status of document reviews conducted internally and externally by the project team.
• Act as the primary point of contact for document control inquiries.
• Resolve discrepancies in documentation and ensure data accuracy across systems.
• Develop and maintain a secure electronic tendering and contract document management system for project use.
• Manage access permissions for internal and external project team members to ensure the confidentiality and security of sensitive information.
• Collaborate with the Project Management team to evaluate and modify document control processes for project specific needs.
• Provide technical support and troubleshooting for the electronic document management system.
• Conduct audits and generate periodic reports to ensure compliance with document control procedures and data integrity.
• Promote adherence to all safety and compliance standards within document management processes.

Requirements

• Bachelor's Degree / HND in relevant discipline
• 2 - 5 years minimum experience, preferably in the oil and gas industry
• ISO 9001 (QMS Internal Auditor), PMP or Prince.
• Ensure control of records and documents for traceability and irretrievability in line with ISO 9001:2008 QMS requirements.
• Excellent analytical skill.
• Self-starter, results-driven and focussed on delivery of quality deliverables on time and within budget.
• Ability to manage large volumes of documentation efficiently.
• Familiarity with industry-specific documentation standards and processes.
• Strong ability to work under pressure and meet tight deadlines.
• High level of confidentiality and professionalism.

go to method of application »

Responsibilities

• Execute welds during structural fabrication. Concentrated Works on Carbon steel in fillets welders and 2G / 5G / 6G positions with one of the following welding process SMAW or GTAW or FCAW (GS or SS) or GMAW
• Be assigned to job such as structural construction, Piles and Deck Welding, piping activities
• Carry out the Welding work in the planned times and costs
• Execute welds during structural and/or pipeline fabrication job in compliance with safety and quality. For Offshore Project the Welder will stay under the supervision of the welder foreman
• Insure the proper implementation of approved operating procedures
• Ensure observance of the project specifications
• Ensure that safety standards are respected
• Ensure that production quality and quantity standards are observed and issue the hand-over of completed works
• Carry out the welding qualification procedure and welder qualification tests when required
• Carry out the welder's repairs or cosmetic weld toe adjustment in case of errors or defects
• Participate to pipe/plate fit up with the pipe fitting and spacer team
• Clean welds after each pass

Job Requirements

• Minimum of SSCE/OND in Engineering or related disciplines.
• 2-5 years of experience, preferably in the oil and gas industry
• Knowledge and application of welding techniques (e.g. TIG, SMAW, GMAW, GTAW, etc.)
• OPITO BOSIET
• Excellent knowledge of the English language, both written and spoken.

go to method of application »

Job Description

• Lead the design, analysis, and optimization of engineering solutions for the projects on the asset, within the assigned discipline (e.g., Mechanical, Civil, Process, Electrical, or Instrumentation).
• Oversee project planning, scheduling, budgeting, and execution to meet deadlines and objectives.
• Coordinate cross-disciplinary efforts to ensure seamless project delivery.
• Monitor project performance and implement corrective actions as needed.
• Coordinate with team members on constructability and design issues and monitor the interfacing between the construction automation plan and the project controls program at jobsites.
• Responsible for quantity take-off, control, reporting and forecasting, and ensures the implementation of project environmental control plan(s) as required.
• Support as required the design of temporary construction facilities, preparation of cost estimates for construction activities and coordinates the preparation of cost reports, forecast and progress reports.
• Review and provide input to project controls documents on progress relating to cost and schedule, and material receiving reports and warehousing to assure delivery of correct materials.
• Develop project construction procedures.
• Plan and recommend procedures to be implemented by construction contractors to ensure construction operations are within requirements of engineering design and specifications.
• Ensure the proper maintenance of construction engineering records for job history.
• Implement controls over variables affecting job progress to ensure engineering and procurement provide timely delivery of drawings, materials, and equipment.
• Provides input to the project staffing plan for construction engineers and associated personnel.
• Collaborate with internal and external stakeholders, including contractors, vendors, and regulatory bodies, to achieve project objectives.
• Prepare and present technical reports and proposals to management and stakeholders.
• Champion HSE best practices within engineering operations.
• Proactively identify and mitigate risks to ensure safe working conditions during projects.

Professional Qualifications

• Bachelor’s Degree in Engineering (Mechanical, Civil, Process, Electrical, Instrumentation, or a related field). A master’s degree or professional certification (e.g., COREN, NSE, or equivalent) is an added advantage.
• Minimum of 10 years of relevant engineering experience in the oil and gas industry, with at least 5 years in a leadership role.
• OPITO BOSIET

go to method of application »

Responsibilities

• Execute welds during structural fabrication. Concentrated Works on Carbon steel in fillets welders and 2G / 5G / 6G positions with one of the following welding process SMAW or GTAW or FCAW (GS or SS) or GMAW
• Execute welds during structural and/or pipeline fabrication job in compliance with safety and quality. For Offshore Project the Welder will stay under the supervision of the welder foreman
• Be assigned to job such as structural construction, Piles and Deck Welding, piping activities
• Carry out the Welding work in the planned times and costs
• Insure the proper implementation of approved operating procedures
• Ensure observance of the project specifications
• Ensure that safety standards are respected
• Ensure that production quality and quantity standards are observed and issue the hand-over of completed works
• Carry out the welding qualification procedure and welder qualification tests when required
• Carry out the welders repairs or cosmetic weld toe adjustment in case of errors or defects
• Participate to pipe/plate fit up with the pipe fitting and spacer team
• Clean welds after each pass.

Job Requirements

• Minimum of SSCE/OND in Engineering or related disciplines.
• 2 - 5 years of experience preferably in the oil and gas industry.
• Knowledge and application of welding techniques (e.g. TIG, SMAW, GMAW, GTAW, etc.)
• OPITO BOSIET
• Excellent knowledge of English language both written and spoken.

go to method of application »

Responsibilities

• Demonstrates SAFETY is the top priority
• Participates in planning with Core/Work Teams
• Plans and schedules any Routine Maintenance work required
• Works with Planner in developing schedule, cost estimates and equipment planning for Routine work to be accomplished during the Turnaround window
• Able to plan complex job and develop resource plan with Scheduler, Execution lead, and Operations across all disciplines. Able to identify and monitor critical and sub-critical paths for major events.
• Able to apply advanced functions of Planning & Estimating Tools, as applicable to the position. Able to educate field execution personnel on look-ahead schedules, and help ensure timely work progression.
• Able to provide input to maintenance work Contracting/Procurement strategy and steward to that plan.
• Able to resolve scheduling issues, including: Negative Float, Out-of-sequence updates, resource overloads, scope change, progress validation, etc.
• Able to develop a complete job plan with materials, resources and timeline.
• Able to provide input into material of construction selection and management.
• Able to plan, estimate, track and schedule Field Order Changes (FCO's).
• Able to apply planning logic, such as, lead, lag, critical path and milestones.
• Able to adequately assess work contingencies with schedule impact, lead coordination activity between teams should contingencies arise.

Requirements

• Bachelor’s Degree in Engineering within an applicable discipline, appropriate certification(s) within discipline, or equivalent professional experience
• Previous experience in a closely related position
• Effective verbal and written communication skills; ability to clearly and concisely convey recommendations to management
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs
• Proficient in selected scheduling and planning software
• Demonstrates good leadership skills in Work Team meetings to remove barriers and steward action items and cost profile to work plan and cost estimates.
• OPITO BOSIET.