Since 1999, the Rumuolumeni Fabrication Yard has long been a pillar of Nigeria’s oil and gas industry, showcasing engineering excellence, technological advancement, and community development. The 1,000,000-square-meter facility has played a vital role in executing West Africa’s most significant infrastructure projects, generating value and employment opp...
Read more about this company
Job Summary
Scaffolders erect and dismantle temporary metal scaffolding structures to provide access platforms for other workers.
Key Responsibilities
- Unload scaffolding materials and prepare the base.
- Fix uprights (standards), horizontals (ledgers), and diagonals (braces).
- Lay decking/planking and install toe-boards and guard rails.
- Dismantle scaffolding safely after use.
- Maintain safety harness tie-off at all times.
Required Qualifications
- SSCE/WAEC.
- Trade Test I, II, III.
Professional Certifications & Licenses
Experience Requirements
Technical Skills & Competencies
- Safe manual handling techniques.
- Teamwork.
Key Performance Indicators (KPIs)
Working Conditions
Physical Requirements
go to method of application »
Department/Division: Corrosion Control
Reports To:Coating Foreman
Job Summary
Blasters & Painters perform surface preparation via abrasive blasting and apply industrial coatings to steel structures.
Key Responsibilities
- Operate blasting equipment to remove rust/old paint.
- Clean surfaces using power tools or solvents.
- Mix paints according to manufacturer instructions.
- Apply coatings using brush, roller, or airless spray guns.
- Maintain cleaning of spray equipment.
Required Qualifications
- SSCE/WAEC.
- Trade Test I, II, III.
Experience Requirements
Technical Skills & Competencies
- Proficient in spray gun handling.
- Knowledge of pot life and induction times.
Key Performance Indicators (KPIs)
- Uniformity of coating thickness.
- Safety adherence.
Working Conditions
Physical Requirements
go to method of application »
Job Summary
Riggers attach loads to lifting equipment using slings, shackles, and chains ensuring safe movement of materials.
Key Responsibilities
- Select gear (slings, shackles) as directed by Foreman.
- Attach loads to crane hooks safely.
- Use tag lines to control load rotation.
- Properly store rigging gear after use.
- Watch for overhead obstructions.
Required Qualifications
- SSCE/WAEC.
- Trade Test I, II, III.
Professional Certifications & Licenses
Experience Requirements
Technical Skills & Competencies
-
Knot tying.
-
Team coordination.
Key Performance Indicators (KPIs)
Working Conditions
Physical Requirements
go to method of application »
Department/Division:QA/QC
Reports To:QA/QC Manager
Job Summary
Quality Inspectors verify that construction and fabrication activities meet project specifications, codes, and standards. They are the primary authority for accepting or rejecting work.
Key Responsibilities
- Perform visual inspections of welds, fit-ups, and installations.
- Witness NDT (RT, UT, MT, PT) and review results.
- Verify material traceability (Heat numbers).
- Monitor hydro-tests and pneumatic tests.
- Prepare Non-Conformance Reports (NCR) for defective work.
- Compile Final Documentation Dossiers (As-built data).
- Ensure compliance with ITP (Inspection and Test Plan).
Required Qualifications
Professional Certifications & Licenses
- CSWIP 3.1/3.2 or AWS CWI.
- ASNT Level II in RT, UT, MT, PT.
- COREN (added advantage).
Experience Requirements
Technical Skills & Competencies
- Deep knowledge of ASME, API, and AWS codes.
- Report writing skills.
Key Performance Indicators (KPIs)
- Detection rate of defects.
- Timely closure of NCRs.
Working Conditions
Physical Requirements
Disclaimer: These job descriptions are designed to comply with the Nigerian Labour Act (Cap L1 LFN 2004) and relevant industry regulations. Employers should review and adapt them to their specific organizational policies and collective bargaining agreements.
go to method of application »
Department/Division:Corrosion Control
Reports To:Construction/Maintenance Manager
Job Summary
The Coating Supervisor oversees surface preparation and painting/coating application to ensure corrosion protection of assets in compliance with NACE/SSPC standards.
Key Responsibilities
- Plan and supervise blasting and painting activities.
- Ensure climatic conditions (Relative Humidity, Dew Point) are suitable for coating.
- Inspect surface profile after blasting.
- Monitor wet and dry film thickness (WFT/DFT).
- Manage paint inventory and ensure correct mixing ratios.
- Ensure proper disposal of hazardous waste (grit, paint cans).
- Prepare coating inspection reports.
Required Qualifications
Professional Certifications & Licenses
- NACE CIP Level 2 or SSPC PCI Level 2.
- ICorr Level 2.
Experience Requirements
Technical Skills & Competencies
- Knowledge of various coating systems (Epoxy, Polyurethane, Zinc).
- Use of inspection tools (Elcometer, Bresle patch).
Key Performance Indicators (KPIs)
- Quality of coating (Pass rate of Holiday testing).
- Productivity (sqm/day).
Working Conditions
Physical Requirements
go to method of application »
RIGGING SUPERVISOR
Department/Division:Lifting & Hoisting
Reports To:Construction/Site Manager
Job Summary
The Rigging Supervisor plans and oversees all lifting operations, ensuring they are conducted safely and in compliance with LOLER and Nigerian lifting regulations.
Key Responsibilities
- Develop Critical Lift Plans.
- Supervise complex lifts involving cranes and multiple lifting points.
- Inspect rigging gear (shackles, slings, chain blocks) and ensure valid certification (Color coding).
- Select appropriate rigging gear for the load.
- Coordinate with Crane Operators.
- Ensure ground bearing pressure is sufficient for crane outriggers.
Required Qualifications
Professional Certifications & Licenses
- OPITO/LEEA Level 3 or 4 Rigging Supervisor.
- NSITF Compliance knowledge.
Experience Requirements
Technical Skills & Competencies
- Calculation of load weights and center of gravity (CoG).
- Interpretation of crane load charts.
Key Performance Indicators (KPIs)
- Zero dropped object incidents.
- Compliance with Lift Plans.
Working Conditions
Physical Requirements
go to method of application »
Department/Division:Plant & Machinery
Reports To:Plant Manager / Maintenance Supervisor
Job Summary
This role involves operating and maintaining specialized industrial equipment, particularly those requiring Ultrasonic Testing capabilities (UTC) or Welding Procedure Qualification (WPQ) related machinery. (Note: This title implies a dual role of specialist operator/technician).
Key Responsibilities
- Operate heavy machinery or specialized testing equipment.
- Perform routine maintenance and troubleshooting.
- Ensure equipment is calibrated and certified.
- Keep daily logs of equipment usage and engine hours.
- Assist in NDT operations or automated welding setups.
Required Qualifications
- OND/HND in Mechanical/Electrical Engineering.
- Trade Test.
Professional Certifications & Licenses
- Relevant Equipment Operator License.
- Specific OEM training certificates.
Experience Requirements
Technical Skills & Competencies
- Mechanical troubleshooting.
- Electrical schematics reading.
Key Performance Indicators (KPIs)
- Equipment availability (>95%).
- Mean Time Between Failures (MTBF).
Working Conditions
Physical Requirements
go to method of application »
Department/Division:Corrosion Control
Reports To: Coating Supervisor
Job Summary
The Coating Foreman directs the blasting and painting crew, ensuring technical specifications and safety protocols are followed.
Key Responsibilities
- Assign tasks to blasters and painters.
- Check equipment (compressors, spray pumps, blast pots) functionality.
- Ensure correct surface preparation standards (SA 2.5, SA 3).
- Supervise mixing and thinning of paints.
- Enforce use of respirators and protective suits.
Required Qualifications
Professional Certifications & Licenses
Experience Requirements
Technical Skills & Competencies
- Airless spray application techniques.
- Grit blasting techniques.
Key Performance Indicators (KPIs)
- Daily coverage area achieved.
- Material consumption vs. budget.
Working Conditions
Physical Requirements
Stamina.
go to method of application »
Department/Division:HSE / Operations
Reports To: Permit Coordinator / Site Manager
Job Summary
The Permit Focal Point manages the Permit to Work (PTW) system for a specific site area, ensuring all high-risk activities are authorized and conflicting activities are managed.
Key Responsibilities
- Receive and review PTW applications.
- Verify that Risk Assessments and JHAs are attached and adequate.
- Conduct site visits to verify isolation (LOTO) and gas test results before activation.
- Maintain a display board of active permits.
- Identify SIMOPS (Simultaneous Operations) conflicts.
- Audit closed permits for compliance.
- Coordinate with Area Authority for permit authorization.
Required Qualifications
Professional Certifications & Licenses
- PTW System Certification (specific to IOCs like Shell, Chevron, etc.).
- NEBOSH IGC.
Experience Requirements
Technical Skills & Competencies
- Understanding of Process Safety.
- Attention to detail.
Key Performance Indicators (KPIs)
- Accuracy of permit documentation.
- Zero incidents due to permit violations.
Working Conditions
Physical Requirements
Walking to various site locations.
go to method of application »
Department/Division: Logistics & Supply Chain / Warehouse
Reports To:Logistics Manager / Warehouse Superintendent
Job Summary
The Storekeeper is responsible for the efficient management of warehouse operations, including receiving, storing, issuing, and recording materials and equipment. This role ensures inventory accuracy and compliance with Nigerian Local Content material handling procedures and company HSE policies.
Key Responsibilities
- Maintain accurate records of all incoming and outgoing materials using inventory management software (e.g., SAP, Oracle).
- Inspect received goods for quality and quantity against purchase orders and waybills.
- Ensure proper segregation of materials, including hazardous substances, in compliance with MSDS and Nigerian environmental regulations.
- Conduct regular stock counts and reconcile physical stock with system records.
- Issue materials to site personnel upon receipt of approved Material Requisition Forms (MRF).
- Monitor stock levels and initiate re-order procedures to prevent project stoppages.
- Maintain a clean and organized warehouse environment (5S methodology).
- Coordinate with Logistics regarding the transport of materials to and from sites.
- Ensure security of the warehouse and prevent pilferage or unauthorized access.
- Report damaged or obsolete stock to management for write-off procedures.
Required Qualifications
- HND or B.Sc. in Supply Chain Management, Business Administration, or related field.
- Minimum of OND with extensive experience may be considered.
- NYSC Discharge Certificate or Exemption Letter.
Professional Certifications & Licenses
- Certificate in Inventory Management or Supply Chain (CIPS Level 2/3 desirable).
- HSE Level 1 & 2 (ISPON/NISP).
Experience Requirements
Technical Skills & Competencies
- Proficiency in MS Office (Excel, Word) and Inventory Management Systems.
- Knowledge of material handling and preservation techniques.
- Understanding of incoterms and logistics documentation.
Key Performance Indicators (KPIs)
- Inventory Record Accuracy (IRA) > 98%.
- Zero safety incidents within the warehouse.
- Time to process Material Requisitions (< 4 hours).
- Zero stock-outs of critical consumables.
- Reduction in material wastage/spoilage.
Working Conditions
- Warehouse environment; may involve exposure to dust and heat.
- Typical 6-day work week or rotation schedule depending on site location (Swamp/Offshore/Onshore).
Physical Requirements
- Ability to lift heavy objects (up to 20kg).
- Prolonged periods of standing and walking.
go to method of application »
Department/Division: Health, Safety & Environment (HSE)
Reports To:HSE Manager / Site Safety Lead
Job Summary
HSE Officer facilitate a culture of safety by observing, mentoring, and correcting unsafe behaviors on site. They ensure compliance with Nigerian Factories Act, NUPRC regulations, and company HSE policies, aiming for Goal Zero incidents.
Key Responsibilities
- Conduct daily Toolbox Talks (TBT) and safety briefings.
- Perform daily site inspections and HSE audits to identify hazards.
- Coach workforce on "Safe Systems of Work" and intervention techniques.
- Investigate accidents/incidents and near misses; prepare detailed reports using root cause analysis.
- Ensure compliance with Permit to Work (PTW) systems.
- Monitor the use of PPE and ensure availability of safety equipment.
- Liaise with regulatory bodies (DPR/NUPRC) during site visits.
- Conduct emergency drills (fire, muster, man-down) regularly.
- Maintain HSE statistics and records (Man-hours, LTI, TRC).
- Promote behavioral-based safety (BBS) programs.
Required Qualifications
- HND or B.Sc. in Science, Engineering, or Environmental discipline.
- NYSC Discharge Certificate.
Professional Certifications & Licenses
- ISPON (Institute of Safety Professionals of Nigeria) Membership – Compulsory.
- NEBOSH International General Certificate (IGC).
- OSHA or IOSH Managing Safely.
Experience Requirements
Technical Skills & Competencies
- In-depth knowledge of Nigerian HSE laws and ISO 45001.
- Risk Assessment and JHA preparation skills.
- Incident Investigation and Reporting.
- First Aid and CPR competency.
Key Performance Indicators (KPIs)
- Number of BBS observations/interventions per week.
- Closure rate of corrective actions (>95%).
- Zero LTI (Lost Time Injury) on assigned shift.
- Training man-hours delivered.
- Timely submission of HSE reports.
Working Conditions
- Active construction site environment (Onshore/Offshore).
- Exposure to weather elements.
Physical Requirements
- Physical fitness to climb heights and access confined spaces for inspection.
- Good visual acuity and hearing.
go to method of application »
Department/Division:Construction / Fabrication
Reports To:Welding Supervisor
Job Summary
The Welding Foreman acts as the direct leader of the welding crew, ensuring productivity and quality at the ground level. They translate the supervisor's plans into action.
Key Responsibilities
- Lead a team of welders in daily tasks.
- Ensure welders have the necessary tools, materials, and PPE.
- Check joint fit-ups prior to welding.
- Monitor welding parameters (voltage, amperage, travel speed) against WPS.
- Conduct Tool Box Talks focused on specific welding hazards.
- Ensure proper handling and return of stubs/unused consumables.
- Report daily production (diameter inches welded) to the Supervisor.
- Enforce housekeeping in welding habitats.
Required Qualifications
- Trade Test I, II, & III (Federal Ministry of Labour).
- NABTEB or City & Guilds in Welding & Fabrication.
Professional Certifications & Licenses
- Previous coding/qualification in 6G positions.
- HSE Level 2.
Experience Requirements
Technical Skills & Competencies
- Proficient in SMAW and GTAW processes.
- Ability to interpret blueprints and welding symbols.
- Leadership and conflict resolution skills.
Key Performance Indicators (KPIs)
- Crew daily weld production targets.
- Crew weld rejection rate.
- Zero safety violations by crew.
Working Conditions
Physical Requirements
go to method of application »
Department/Division: Mechanical / Piping
Reports To: Fitting Supervisor
Job Summary
The Fitting Foreman leads a crew of fitters, ensuring daily fabrication targets are met with precision and safety.
Key Responsibilities
- Assign daily tasks to fitters.
- Verify measurements and cut lengths of pipes and steel.
- Inspect joint preparation (bevel angles) and fit-up alignment.
- Ensure correct orientation of valves and fittings as per drawings.
- Supervise rigging and lifting of spools into position.
- Maintain tool inventory for the crew.
- Enforce PPE compliance.
Required Qualifications
- Trade Test I, II, III in Pipe Fitting/Fabrication.
- NABTEB Technical Certificate.
Experience Requirements
Technical Skills & Competencies
- Strong ability to read ISO drawings.
- Proficient in using cutting torches and grinders.
Key Performance Indicators (KPIs)
- Daily fit-up production counts.
- Compliance with fit-up tolerances.
Working Conditions
Physical Requirements
To Apply:
go to method of application »
Department/Division:HSE / Emergency Response
Reports To:HSE Officer / Fire Chief
Job Summary
The Firewatch is responsible for monitoring hot work areas to prevent fires and ensure immediate response in case of ignition. They serve as the primary line of defence during welding, cutting, and grinding operations.
Key Responsibilities
- Continuously monitor the hot work area for fire hazards before, during, and after operations (typically 30 mins post-work).
- Ensure appropriate fire extinguishers are available, charged, and correct for the hazard type.
- Inspect the hot work area to ensure flammable materials are removed or covered with fire blankets.
- Stop work immediately if a hazard arises or if conditions become unsafe.
- Sound the alarm in case of fire and attempt to extinguish small fires if safe to do so.
- Ensure hot work permits are valid and posted at the work site.
- Prevent unauthorized entry into the hot work zone.
- Communicate effectively with welders and supervisors.
Required Qualifications
- Minimum SSCE/WAEC/NECO.
- Trade Test Certificate is an added advantage.
Professional Certifications & Licenses
- Basic Fire Fighting Training Certificate.
- Authorized Gas Tester (AGT) certification (desirable).
- HSE Level 1 (NISP).
Experience Requirements
Technical Skills & Competencies
- Practical knowledge of operating fire extinguishers (P.A.S.S technique).
- Ability to recognize fire hazards (Class A, B, C, D, K fires).
- Understanding of Gas Testing basics.
Key Performance Indicators (KPIs)
- Zero fire incidents during watch duty.
- 100% compliance with post-work monitoring times.
- Availability and readiness of fire equipment.
Working Conditions
- High-heat environments, exposure to welding fumes and sparks.
- Standing for long periods.
Physical Requirements
- Visual acuity to detect smoke or sparks.
- Physical ability to carry fire extinguishers and react quickly.
go to method of application »
Department/Division:Fabrication
Reports To:Welding Foreman
Job Summary
Structural Welders perform welding on beams, columns, plates, and other structural components using specified welding processes.
Key Responsibilities
- Perform welding on structural steel components (Carbon Steel/Stainless Steel).
- Execute welds in positions (3G, 4G, 6G) as qualified.
- Clean and prepare surfaces before welding (grinding, brushing).
- De-slag and clean welds for inspection.
- Maintain welding equipment and cables in good condition.
- Follow all safety protocols regarding hot work and fire prevention.
Required Qualifications
- SSCE/WAEC.
- Trade Test Certificate (Ministry of Labour).
Professional Certifications & Licenses
- Valid Welder Performance Qualification (WPQ) record.
- Relevant coded welder certificates (AWS D1.1 usually).
Experience Requirements
Technical Skills & Competencies
- Proficiency in SMAW (Stick) and FCAW processes.
- Ability to pass radiographic/ultrasonic testing.
Key Performance Indicators (KPIs)
- Pass rate of NDT inspections.
- Linear meters welded per shift.
Working Conditions
- Working at heights and in confined spaces.
- Use of full PPE including welding hoods and respirators.
Physical Requirements
- Good hand-eye coordination.
- Ability to lift heavy metal parts.
go to method of application »
Department/Division:Civil / Access
Reports To: Site Manager / HSE Manager
Job Summary
The Scaffolding Supervisor manages all scaffolding operations, ensuring safe erection, modification, and dismantling of access platforms in compliance with BS EN 12811 and Nigerian regulations.
Key Responsibilities
- Design and plan scaffolding structures based on access requirements.
- Supervise erection and dismantling of scaffolds.
- Inspect all scaffolds (Scafftag system) ensuring they are safe for use (Green Tag).
- Ensure compliance with TG20:13 and SG4:15 standards.
- Manage scaffolding material inventory.
- Conduct risk assessments for complex scaffolding (cantilevers, hanging scaffolds).
- Lead the scaffolding rescue team.
Required Qualifications
Professional Certifications & Licenses
- CITB Advanced Scaffolder or equivalent.
- Scaffolding Inspection Certificate (CISRS/STI).
Experience Requirements
Technical Skills & Competencies
- Load calculation for scaffold structures.
- Knowledge of tube & fitting and system scaffolds (Cuplok/Layher).
Key Performance Indicators (KPIs)
- Zero scaffold collapses or failures.
- Timeliness of scaffold availability for other trades.
- Accuracy of Scafftag records.
Working Conditions
Physical Requirements
go to method of application »
Department/Division: Construction / Fabrication
Reports To: Construction Manager / Superintendent
Job Summary
The Welding Supervisor oversees all welding activities, ensuring they meet project specifications, international codes (ASME, AWS), and Nigerian quality standards. They manage resources, productivity, and quality control of the welding team.
Key Responsibilities
- Supervise daily welding activities and allocate tasks to foremen and welders.
- Ensure all welding is performed according to approved WPS (Welding Procedure Specifications).
- Monitor welder performance and qualification (WPQ) validity.
- Coordinate with QC Inspectors for NDT (Non-Destructive Testing) and visual inspections.
- Manage welding consumables (electrodes, filler wires) storage and issuance (baking/holding ovens).
- Resolve technical welding issues on site.
- Ensure compliance with HSE regulations regarding welding fumes, radiation, and electrical safety.
- Prepare daily progress reports and weld maps.
- Mentor and train local welders to meet NCDMB targets.
Required Qualifications
- HND or B.Sc. in Mechanical/Metallurgical Engineering.
- Alternatively, extensive trade background with City & Guilds/NABTEB.
Professional Certifications & Licenses
- CSWIP 3.1 or 3.2 Welding Inspector or AWS CWI.
- COREN registration (for Engineers).
Experience Requirements
- Minimum 8-10 years in welding fabrication/construction.
- At least 3 years in a supervisory role.
Technical Skills & Competencies
- Expert knowledge of welding processes (SMAW, GTAW, FCAW, SAW).
- Ability to read isometric drawings and welding symbols.
- Knowledge of metallurgy and heat treatment (PWHT).
Key Performance Indicators (KPIs)
- Weld Repair Rate (< 2% or as per project KPI).
- Schedule adherence for fabrication milestones.
- Consumable wastage (< 5%).
- Safety compliance of the welding crew.
Working Conditions
- Construction site/Fabrication yard.
- Exposure to high noise, heat, and UV radiation.
Physical Requirements
Method of Application
Please send your CV to recruitment@marconi.ng
Build your CV for free. Download in different templates.
Gmail
Yahoomail