Jobs Career Advice Signup
X

Send this job to a friend

X

Did you notice an error or suspect this job is scam? Tell us.

  • Posted: Feb 25, 2020
    Deadline: Not specified
    • @gmail.com
    • @yahoo.com
    • @outlook.com
  • Oasis Management Company RC 635930 is the premier Management Consulting and Technology Services Company, focused on the emerging convergence between Computing, Communications, Content and Commerce (4-Cs). Incorporated in Nigeria in 2005, Oasis Management Company Limited was founded on the principle that intelligent consulting services to a select group of cl...
    Read more about this company

    AutoCAD Draftsman

    Location: Lekki, Lagos
    Job Type: Contract

    Job Description

    • Creating accurate CAD drawings from hand sketches, verbal instructions, and site visits.
    • Seamlessly integrating and working with project managers design consultants, and sub-contractors, to produce and alter drawings.
    • Thinking creatively and critically to support the project team in the design process, to create sketches and drawings that work.
    • Creating and continually updating project drawings lists.
    • Printing various formats of drawing sets for project managers and site superintendents.
    • Systematically saving sketches and drawings on our CAD server; keeping the server organized; updating project folders and files as jobs progress and revisions are made.
    • Exhaustively reviewing and checking sketches and drawings for errors, before being sent to architects, sub- contractors, project managers, etc.
    • Seeking clarity and understanding from engineers and project managers when you are not 100% certain of something.
    • Organizing and uploading drawings to web-based storage sites/collaboration project sites to share drawings with project and subcontractors.
    • Create, edit, and update standard details for use in projects.
    • Creating and altering construction sketches.
    • Ongoing drawing focused collaboration with project managers and design consultants.
    • Printing of CAD drawings in various formats and packages and delivering them to the correct contact in a timely manner.
    • Must be able to draw civil buildings, structural drawings, GEA drawings of electrical, mechanical, civil, piping relating to power     plants,
    • Must be able to draw plans, elevations, cross sectional view of buildings and Equipment.

    Qualitative and Other Attributes Required

    • A passion for doing high quality work.
    • The ability to think critically, innovate, and solve challenging technical problems.
    • High attention to detail.
    • Effective time management and logical decision-making ability.
    • Being able to self-start and self-motivate when there is no one available to provide instruction.
    • Capacity to handle pressure.
    • Strong work ethic, and the ability to handle peak work times.
    • Willingness to work both at the site and in the office.
    • Mental and emotional fitness.

    Qualifications

    • Minimum 5-year experience in a CAD Operator role.
    • Outstanding fluency and skill within the AutoCAD program.
    • Excellent communication skills; listening, comprehension, and feedback.
    • A two-year Degree in Computer Aided Drafting / A Diploma in any Engineering course (Civil, Electrical, Mechanical, Petro-chemical).

    Salary and Benefits

    • Pay/benefits are competitive based on industry standards.

    go to method of application »

    Lead Civil Design Engineer (Heavy Rotating Equipment Design Experience)

    Location: Lekki, Lagos
    Job Type: Contract

    Job Description

    • Work with Consultants (local and abroad) to assemble a design specification compliant with the employers’ requirements, agree its format and content, and monitor and review its preparation ensuring delivery by the due date
    • Agree and monitor scope of works with the IPP Project Management team and Company Civil department.
    • Clearly define building requirements and purpose of use with the IPP Project Management team and Company Civil department.to allow detailed design
    • Carry out detailed design as per Local, Indian or International codal standard requirements, QA and technical review and sign off by IPP Project Management, including complex calculations and co-ordination issues
    • Review and monitor the production of calculations including QA, technical reviews and sign off
    • Ensure that information for project delivery plan is completed in requisite detail and to deadlines, and keep IPP Project Management Team informed regarding design progress through explanation of design decisions
    • Provide documentary information to assist in the preparation of tender documents, ensuring that information for tender preparation is completed in requisite detail and to deadlines, and keep the IPP Project Management team informed regarding design progress through explanation of design decisions
    • Provide documentary information IPP Project Management team to assist in the preparation of tender documents, ensuring that information for tender preparation is completed in requisite detail and to deadline.
    • Deal with the day to day queries from the IPP Project Management Team ensuring that relevant information is available on time for construction activity
    • Report to the the IPP Project Management Team i any variance between the works constructed and the design intent
    • Lead the design process and encourage the rest of the team to deliver appropriate and cost effective solutions to the agreed programme.
    • Follow in full the document control, QA processes relevant to project work, ensuring drawings, specifications, reports and correspondence are issued, and filed in an appropriate manner, coach junior staff in their usage.

    Desired Skills

    • The applicant will have proven experience in the design of Heavy rotating equipment foundations, Building foundations, Switchyard pedestal foundations, piling, Building Structures with significant experience in a similar role or demonstration of a good track record.
    • Preferable experience in Combined Cycle Power plants with Gas  and Steam turbines, HRSG, Transformers, Switchyard, Transmission towers etc.
    • The applicant should ideally have obtained Chartered Engineer status or equivalent, possess a degree in Civil or Structural Engineering and possess membership to an accredited engineering body
    • Applicants need to be able to demonstrate good management, communication and technical skills and be capable of working both within the team and independently, as dictated by work load
    • Good presentation skills are also required
    • Must be fully conversant with technical structural software, such as RAM, CSC, ETABS, SAFE and STAAD
    • A sound understanding of Microsoft Outlook, Word, Excel, Project is essential
    • Must be fluent in English with an excellent understanding of technical terminology

    Qualifications

    • The candidate should possess a Degree in Civil or Structural Engineering and possess membership to an accredited engineering body.
    • Experience: 12 +years
    • Hands on Proficiency in etabs and Safe.
    • Must be Regular BE /B.Tech(Civil) or ME/M.Tech(Structure) from premium institutes
    • Position Location- Lagos, Nigeria but need to travel to site on requirement basis (<30%)

    Salary and Benefits

    • Pay/benefits are competitive based on industry standards.

    go to method of application »

    Senior Civil QA / QC Engineer (Experience in Combined Cycle / Thermal Powerplant)

    Job Type: Contract

    Job Description

    • Perform and coordinate inspections and determine quality assurance testing models of raw materials and finished products.
    • Prepare, document, and execute detailed test plans, test cases, and defect reports.
    • Ensures products and service comply with requirements. ... The aim is to filter the products before they reach the client, so that products that do not comply with requirements are discarded.
    • Develop and determine all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes.
    • Review quality of all materials at site and ensure compliance to all project specifications and quality and collaborate with department for all material procurement and maintain quality of materials.
    • Supervise effective implementation of all test and inspection schedule and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes.
    • Perform and coordinate inspections and determine quality assurance testing models of raw materials and finished products. Prepare, document, and execute detailed test plans, test cases, and defect reports.
    • Ensures products and service comply with requirements. The aim is to filter the products before they reach the client, so that products that do not comply with requirements are discarded.
    • Develop and determine all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes.
    • Review quality of all materials at site and ensure compliance to all project specifications and quality and collaborate with department for all material procurement and maintain quality of materials.
    • Supervise effective implementation of all test and inspection schedule and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes.

    Qualifications

    • B.Tech or equivalent, minimum 10-15 years ‘experience.
    • Expertise in batching plant, civil lab testing, cube testing.
    • Knowledge of various concrete grade design mixture, NDTs.
    • Ability to write quality procedures for cement, sand, Aggregate, water etc

    Required Competencies:

    • Raise the level of technical competence within the teams
    • Implement delivery and quality measurement processes
    • Promote technical excellence in all our projects
    • Undertake technical reviews and contribute to the concept design of IPP Combined Cycle
    • Provide continuous feedback to the IPP Management on the effectiveness of the protocols and processes in place with a view to continuous improvement
    • Develop positive professional relationship with the IPP Project Management Team communicating openly about project progress. Participate in team meetings, disseminate information within the team, and communicate with other teams
    • Identify and act on, or refer, potential risk issues and follow in full the company commercial and contracting processes
    • Manage delegated tasks to ensure that deadlines are met and flag resourcing concerns to team leader. Identify and flag additional resource requirement to the IPP Project Management team
    • Complete timesheet accurately ahead of weekly deadlines.

    Salary and Benefits

    • Pay/benefits are competitive based on industry standards.

    go to method of application »

    Lead Electrical Engineer - (Experience in Construction of Combined Cycle Gas Power Project)

    Job Description

    • This position will be responsible for a Design and Engineering work, planning and overseeing installation, Testing and Commissioning, Operation and Maintenance of all electrical power equipment, or systems related to Combined Cycle Power plant under general supervision.

    Main Duties

    • Expertise in Extra High, Medium and Low Voltage power systems, Transformers, Motors, MV / LV VFDs, Generators, Control and Protection, Switchgears / MCCs, Switchyard and Transmission lines of 220KV and above, Manage technical discussions with third parties such as client, Consultants, suppliers, sub-contractors, OEM’s etc.
    • Supporting all the phases of project cycle from Concept, Design and engineering till Operation of complete Combined Cycle Power plant where little evaluation or ingenuity is normally required.
    • Familiar with International codes, Standards and recommended practices for design and selection of Electrical equipment
    • General knowledge of other related interconnected discipline systems.
    • Performing detailed or routine engineering assignments involving calculations and tests.
    • Using established and well defined engineering procedures.
    • Gathering and correlating basic engineering data.
    • Preparation of electrical drawings and specifications for new IPP project.
    • Coordinate with clients, contractor and consultants to determine project requirements, schedules and deliverables.
    • Lead design engineering responsibility and supervise work done by Installation and Testing technicians during project execution.
    • Specify and set the standards for HSE requirements in the Electrical system of CCPP
    • Familiar with interlocks and protection - wiring and instrument signals and drawings for both simple and combined cycle.
    • Experience in 33KV Transmission line erection and commissioning.

    Qualifications

    • Bachelors’ Degree in Electrical Engineering.
    • 15 years’ experience in the power plant projects with specific experience with combined cycle gas-based power projects.(>15 years for Lead Engineer position and more than 12 years for Senior Engineer position)
    • 5+ years in construction of power plants.
    • Previous experience working for the Owner, Consultant or EPC contractor on large CCGT projects is essential.
    • Readiness to travel
    • Readiness to be at site based in Kwale, Delta State, Nigeria at least 50% time
    • Previous international experience is required.
    • Ability to work efficiently and effectively when managing multiple tasks.
    • Effective oral and written communications and excellent interpersonal skills with the ability to deal effectively with the design team in the resolution of project related issues.
    • Must be self-motivated, results oriented, and be flexible to work well under tight schedules in a fast paced multi-disciplinary team environment

    Salary and Benefits
    Pay / benefits are competitive based on industry standards

    go to method of application »

    Lead I & C Engineer - (Experience in Construction of Gas based Combined Cycle Power Project)

    Summary

    • This position will be responsible for a Design and Engineering work, planning and overseeing installation, Testing and Commissioning, Operation and Maintenance of all systems related to Combined Cycle Power plant under general supervision.
    • Preparation of Instrumentation Specifications, Philosophies, Lists, Requisitions, calculations, schedules and drawings for procurement, installation and commissioning of installations (Brownfield and Greenfield Projects) for Conceptual studies / Basic Engineering, Front End Engineering design (FEED), Detailed Engineering Design (DED) Projects.

    The I & C system in CCCP shall consist of:

    • GTG Control system (SIEMENS T3000 or GE MARK Vie or other OEM equivalent)
    • STG Control system (SIEMENS T3000 or GE MARK Vie or ALSTOM or any other STG OEM)
    • DCS Control system for complete CCPP (Yokogawa, Honeywell, METSO, SIEMENS, GE MARK Vie or equivalent )
    • PLC’s of different BOP packages
    • Field Instrumentation for GTG, HRSG, STG and BOP

    Main Duties

    • Expertise in Design & Engineering, Engineering review and Comments, Installation supervision, Testing and Commissioning, Trouble shooting and O & M of I & C system of Combined Cycle Power plant.
    • Supporting all the phases of project cycle from Concept, Design and engineering till Operation of complete Combined Cycle Power plant where little evaluation or ingenuity is normally required.
    • Ensure that designs comply with the relevant procedures, standards and regulations.
    • Review of Instrumentation drawings (location drawings, interconnection drawings, cable termination drawings, cable tray / route drawings, cable block diagrams, control system block diagrams, shutdown logic diagrams, function block logic diagrams, hook-up drawings for various instruments, FAR layout drawings, junction box termination drawings, level coordination sketches,).
    • Ensure, as far as practically possible, that all assigned work is carried out in compliance with agreed budget and schedule.
    • Keep up to date with technical developments, National and International standards and legislative requirements related to the discipline.
    • Familiar with International codes, Standards and recommended practices for design and selection of I & C as described above
    • Prepare RFQs (instruments, control systems, control panels)
    • Review and tagging of P& ID
    • Prepare engineering calculation spreadsheets.
    • Takes entire responsibility for the execution of detailed design and ensuring compliance with the project specification
    • Liaise with other departments, clients, vendor, subcontractors, third parties and approving authority.
    • Participate in inter-disciplines, project, client, vendor, subcontractors and third parties meetings.
    • Participate in design review such as HAZOP, SIL classification, Independent Design Review Constructability review, P&ID review and 3D model review meetings
    • Perform Inter-discipline check and Job assignments
    • Perform Instrumentation engineering review activities on documents/drawings produced out by other Engineers, Designers and CAD Operators.
    • Prepare scope of work, man-hour and cost estimates for proposals
    • Provide professional advice to peers in Instrumentation engineering design
    • Prepare instrumentation cost time ratios (CTRs) for project Bids.
    • Perform site verification and mark-up for Projects
    • Coordinate with clients, contractor and consultants to determine project requirements, schedules and deliverables.
    • Lead design engineering responsibility and supervise work done by Installation and Testing technicians during project execution.
    • Specify and set the standards for HSE requirements in the I & C system of CCPP
    • Prepare estimates and schedules and assist in their review.
    • Encourage and provide lateral learning within the project
    • Familiar with interlocks and protection - wiring and instrument signals and drawings for both simple and combined cycle.

    Qualifications

    • Bachelors’ Degree in Electrical Engineering.
    • 15 years’ experience in the power plant projects with specific experience with combined cycle gas-based power projects.(>15 years for Lead Engineer position and more than 12 years for Senior Engineer position)
    • 5+ years in construction of power plants.
    • Previous experience working for the Owner, Consultant or EPC contractor on large CCGT projects is essential.
    • Readiness to travel
    • Readiness to be at site based in Kwale, Delta State, Nigeria at least 50% time
    • Previous international experience is required.
    • Ability to work efficiently and effectively when managing multiple tasks.
    • Effective oral and written communications and excellent interpersonal skills with the ability to deal effectively with the design team in the resolution of project related issues.
    • Must be self-motivated, results oriented, and be flexible to work well under tight schedules in a fast paced multi-disciplinary team environment

    Salary and Benefits
    Pay / benefits are competitive based on industry standards.

    go to method of application »

    Warehouse Officer (Perfect with ABC / XYZ / FSN analysis / FIFO & FEFO)

    Job Descriptions

    • Have experience in Oil & Gas, Chemical, Petro Chemical, Power Plant industries.
    • Have knowledge about project phase warehouse and steady state phase of warehouse.
    • Knowledge of inbound process of Warehouse.
    • Knowledge about Best Warehouse Practices.
    • Knowledge & Responsible for preparation of warehouse documentations like Receipt, Issue, Return, Stock transfer, Gate Pass etc
    • Conducting physical Stock verification of Material as per SOP & Its related reconciliation, if any.
    • Ensure accuracy of the stock as per system or book value.
    • Ensure & achieve 100% inventory record accuracy.
    • Knowledge about ABC / XYZ / FSN analysis / FIFO & FEFO.
    • Identification of Non-moving inventory.
    • Preparation of daily / weekly / monthly report of activities.
    • Ensure incoming materials are managed appropriately.
    • Ensure traceability of items
    • 100 % Material identification tagging on each Materials.
    • Knowledge about surplus / obsolete inventory.
    • Knowledge of Material Codification Process.
    • Knowledge of Out Gate Pass Process.
    • Maintain inventory integrity within our system by making sure all inventory transactions are accounted in the ERP / database system.
    • Implementation of “warehouse improvement processes” and systems.
    • Establishment of Warehouse facilities / Set up.
    • Preservation of Materials as per requirement / User guideline.
    • Monitoring & tracking of Shelf life related items.
    • Knowledge about safe handling of Chemicals / Gas Cylinder / Bulky & Heavy Items or Equipment's.
    • Organize warehouse as per Item Category.
    • Ensure safe storage, safe handling & safe material movement.
    • Good analytical and problem-solving skills.
    • Other works related to above job role as per Management Requirement.
    • Knowledge of Microsoft Excel, PowerPoint, Microsoft word etc
    • Knowledge of SAP-MM / Oracle /Other ERP, related to warehouse.
    • Training to junior staff
    • Co-ordinations for Resources
    • Co-ordination with Purchase / Logistic team / Plant.

    Qualifications

    • Bachelor of Engineering degree or Diploma or B. Sc Or B Com (Regular Course)
    • 5 to 10 years of Experience in Warehouse Management function in manufacturing industries.
    • Knowledge about ABC / XYZ / FSN analysis / FIFO & FEFO.
    • Knowledge of SAP-MM / Oracle /Other ERP, related to warehouse.

    Salary and Benefits
    Pay / benefits are competitive based on industry standards

    Method of Application

  • Send your application

Never miss a job with our real-time & personalized job service
Subscribe Now
Back To Home

Career Advice

View All Career Advice

Subscribe to Job Alert

 

Join over 340K happy subscribers

 
 
 
Send your application through

Yahoomail Gmail Hotmail