Jobs at Archware Technologies International Limited

Job Description

• The Plumbing inspector is responsible for ensuring that the plumbing systems in the Organization meet local building codes and standards.
• The individual would commonly inspect new construction projects to ensure that they’re following code, as well as existing structures to make sure that they aren’t violating any regulations.
• The Plumbing inspector would be called upon to investigate issues with the organization plumbing system.
• This might include anything from minor leaks or clogs to major problems like burst pipes or collapsed sewer lines. In these cases, they work closely with contractors and other professionals to determine the cause of the issue and how best to resolve it.

Requirements

• Two (2) years Industrial / Technical College Diploma plus a minimum of eight (8) years of relevant inspection experience
• A good working knowledge of quality system standards and methods
• Working knowledge/experience of codes such as the Uniform Plumbing ore equivalent standards
• Experience working in Middle East will be an added advantage
• Must pass CBT Test as may be required.

go to method of application »

Job Description

• The HVAC inspector will work on installing, maintaining, and repairing HVAC systems in the Organization and Reporting to the Manager.

Requirements

• Two (2) years Industrial or Technical College Diploma plus a minimum of eight (8) years of relevant inspection experience
• Resume reflected a working knowledge/experience in codes such as the Sheet Metal and Air
• Resume reflected Conditioning Contractors National ASSOCIATION (SMACNA) code, Uniform Mechanical Code, NFPA 90A, ASHRAE Handbooks and/or equivalent standards.
• Working knowledge of electrical installations including materials, methods, specifications, and hazardous location identification for oil and gas or petrochemical industries.
• Resume reflected good working knowledge of quality system standards and methods
• Experience working in Middle East will be an added advantage
• Must pass CBT Test as may be required.

go to method of application »

Job Description

• The Instrumentation Inspector would assist the project manager by preparing, auditing, examining and performing inspection of Electrical & Instrumentation Installation and procedures.

Requirements

• Two (2) years Industrial / Technical College Diploma plus a minimum of eight (8) years of relevant inspection experience
• Resume reflected a working knowledge/experience of standards such as ISA RP 12.6, ISA RP 12.2, ANSI MC96.1, IEEE 518, IEEE 1100. IEC 60529, NEMA ICS 6, NEMA 250, NFPA 70, IEC and UL 94.
• Working knowledge of instrumentation inspection such as loop checking, wiring continuity and color coding, start up, and troubleshooting as well as knowledge of materials, methods, specifications, and hazardous location identification for oil and gas or petrochemical industries.
• Working knowledge of quality system standards and methods
• Experience working in Middle East will be an added advantage
• Must pass CBT Test as may be required.

go to method of application »

Job Description

• The Non-Destructive Testing (NDT) technician would be responsible for the examination of structures, vehicles, and products for flaws and structural weaknesses using non-destructive testing techniques.
• He/She would conduct material tests, interpret the results, and generate reports on their findings.

Requirements

• High School Graduate with 5 years’ experience in NDT testing methods.
• Experience in shutdown & turn around in Refinery/petrochemical Units.
• ASNT/PCN NDT level II with valid certificate.
• Familiar with (UT Thickness Gaueging & weld scanning) ; applicable codes and standards in NDT & Inspection includes but not limited. ASME, AWS, API, ANSI, ASTM
• Experience working in Middle East will be an added advantage
• Must pass CBT Test as may be required.

go to method of application »

Job Description

•  The API Inspector is responsible for the work execution of projects and integrity management programs including field inspections and inspection crew coordination.
• He/She would carry out, visual and NDT inspections, daily planning and direction of inspection crews, coordination of crew activities with the client and maintenance crews, interaction with engineering representatives and review and completion of final inspection and assessment reports.

Requirements

• B.E / Diploma in Mechanical Engineering with Valid experience in any of API 570/510/653 with respect to plant inspection & shall have 5 to 7 years minimum years of experience including 5 years’ experience in Plant/Turnaround Inspection.
• Must pass the required CBT Test as may be required
• Multi-discipline ASNT/PCN NDT level II with valid certificate.
• Experience working in Middle East will be an added advantage

go to method of application »

Job Description

• The Communications inspector would be tasked with the responsibility of managing the Organization external and internal communications.
• He/She will promote a positive public image and control the dissemination of information on the company’s behalf.

Requirements

• Two (2) years Industrial / Technical College Diploma plus a minimum of eight (8) years of relevant inspection experience.
• Working knowledge/experience of Telecommunications in the field of OSP (Outside Plant) installation as well as PDS (Premise Distribution System) installation, and familiar with North American or International Telecommunications standards; Building Industry Consulting Services International- Telecommunications Distribution Methods Manual (BICSI-TDMM); National Electrical Codes; and National Electrical Safety Codes, ore their equivalents.
• Working knowledge of quality system standards and methods.
• Hold relevant certifications such as Communication Inspector BICSI or equivalent.
• Experience working in Middle East will be an added advantage
• Must pass the required CBT Test as may be required.

go to method of application »

Job Description

• The Project Quality Supervisor is in charge of Supervising the overall day to day, performance, co-ordination, management and maintenance of the agreed project to obtain maximum productivity, efficiency, quality, service and profitability for the organization upholding all aspects of compliance and standards and adhering to budget and prescribed criteria

Requirements

• For a B.Sc Degree in Mechanical Engineering, applicant should have 10 years’ experience with minimum of five (5) years inspection supervision/Manager experience.
• For a Diploma in Mechanical Engineering, applicant should have 15 years’ experience with minimum of five (5) years inspection supervision/Manager experience.
• At least, one-year continuous employment with the GIS Company.
• Knowledge of applicable US Codes, construction and maintenance procedures, and material testing procedures.
• Certified ISO 9001 -2015 Lead auditor
• Experience working in Middle East will be an added advantage
• Must pass the CBT Test as may be required.

go to method of application »

Job Description

• The Welding inspector is responsible for inspecting and assessing the quality and strength of welding work.
• Their job is to ensure welds are safe and ready to function as part of the device or structure.
• Welding inspectors also inspect the equipment used and ensure welders adhere to company and state safety regulations.

Requirements

• Two (2) years industrial / technical College Diploma plus a minimum of eight (8) years of relevant inspection experience.
• Holds a valid international certification as a welding inspector in AWS or CSWIP
• Working knowledge of quality system standards and methods
• A good knowledge of applicable international standards
• Driving license is must
• Experience working in Middle East will be an added advantage
• Must pass CBT Test as may be required.

go to method of application »

Job Description

• The QA/QC Coating Inspector is responsible for the supervision of ongoing coating activities at the construction site and see to it that the work is in accordance with the engineering design and specification and within the scope of work.

Requirements

• Two (2) years industrial or technical College Diploma plus a minimum of eight (8) years of relevant inspection experience.
• Holds CSWIP-BGAS 2 or NACE LEVEL 2 or equivalent
• Resume reflected a working knowledge/experience in all phases and types of critical coating applications and methods
• Driving license is must
• Experience working in Middle East will be an added advantage
• Must pass the CBT Test as may be required.

go to method of application »

Job Description

• The Welding inspector is responsible for inspecting and assessing the quality and strength of welding work.
• Their job is to ensure welds are safe and ready to function as part of the device or structure. Welding inspectors also inspect the equipment used and ensure welders adhere to company and state safety regulations.

Requirements

• B.Ed / Diploma in Mechanical must have Valid Welding Inspector certification in CSWIP 3.1, AWS-CWI or equivalent certification.
• A minimum of 5 years of experience as a welding inspection in Plant/Turnaround In refinery/petrochemical.
• Multi-discipline ASNT/PCN NDT level II with valid certificate.
• Experience working in Middle East will be an added advantage
• Must pass the required CBT Test as may be required.

Salary
USD5,500 - USD 6,500 per month.