Jobs at Amaiden Energy Nigeria

Roles & Responsibilities

• Assist crane operators, forklift operators, and riggers during lifting and material handling operations.
• Support in loading and unloading materials from trucks, trailers, or storage areas.
• Help in moving materials, tools, and lifting accessories to designated work areas.
• Assist in positioning, aligning, and securing loads under supervision.
• Ensure lifting accessories (slings, shackles, hooks, chains, etc.) are available and properly arranged before operations.
• Carry out basic equipment cleaning and routine checks as directed.
• Maintain proper housekeeping before, during, and after lifting operations.
• Follow instructions from supervisors, crane operators, forklift operators, and riggers.
• Observe safety procedures and use appropriate Personal Protective Equipment (PPE) at all times.
• Assist in barricading and securing lifting areas to prevent unauthorized access.
• Support in manual handling tasks when required.
• Participate in Toolbox Meetings (TBM) and safety briefings.

Qualification

• BSc. Engineering
• Basic knowledge of lifting operations and safety practices is an advantage.
• Relevant safety training (e.g., basic HSE training) is an added advantage
• 1-2 years experience required

go to method of application »

Roles & Responsibilities but limited to;

• Fits and assembles structural frameworks, such as angle iron, H-beams, and plate steel,
• Using hand tools and welding equipment and following blueprint specifications.
• Periodically compares dimensions of assembly to blueprint specifications, using square, rule, and calipers
• Tack-welds fitted parts together or direct Welder to tack-weld parts.
• Carry out heat straightening of parts with acetylene torch
• Marking of control line before fit-up of material.
• Carry out edge preparation of structural member by using power tools
• Ensure dimensional control by using auto level and other dimension control equipments.

Qualification

• 3f.4f fcaw welding certificate
• 5 years minimum experience

go to method of application »

Roles & Responsibilities but not limited to;

• Analyze engineering drawings, blueprints, specifications, sketches, Cutting orders list to plan layout for cutting operations.
• Examine work piece for defects and measure work pieces with straightedges and measuring tape to ensure conformance with specifications.
• Signal crane operators to move large work piece.
• Layout, position, align, and secure parts prior to cutting, using straightedges, combination squares, steel rule and measuring tape.
• Prepare all material surfaces to be cut, ensuring that there is no thick scale, slag, rust, moisture, grease, or other foreign matter.
• Ensure Proper marking according to drawing and specification
• Select and install torches, torch tips, Cutting Nozzle according to Cutting Nozzle chart specifications or types and thicknesses of metals
• Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
• Cut and bevel metal plates, H-Beam and structural shapes to dimensions as specified by Drawing, blueprints, layouts, cutting order list and templates, using Band saw, Beaver Machine, Track Machine or CNC Gas Cutting Machine, hand shears, or chipping knives.
• Guide and direct flames across workpieces to straighten and avoid bend, melt, or build up metal.
• Monitor the burning, cutting processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
• Detect faulty operation of equipment or defective materials and notify supervisors.
• Mark or tag material with proper job number, piece marks, and other identifying marks as required.
• Arrange finished materials on the pick area
• Operate safety equipment and use safe work habits.

Qualification

• OND,BSc ,HND
• 5 years minimum experience.

go to method of application »

Roles & Responsibilities but not limited to;

• Must be able to perform duties of a fabricator on a daily basis
• Job duties include but not limited to welding, gouging and grinding
• Ability to weld in all fillet weld position
• Ability to weld in all groove weld position including TKY joints
• Carry out cosmetic on finished weld
• Ability to connect, assemble and use FCAW and SMAW welding machine
• Must be able to use other equipments like power bushing machine, grinding machine, chipping hammer and other hand tools used in welding and cosmetics.
• Carry out pre heating of parts using acetylene torch
• Use tempstick to avoid excessive heat input and distortion.
• Ability to read and understand WPS.
• Carry out repair in any defective joint
• Carry out housekeeping.

Qualification

• Carbon steel, 6GR SMAW+FCAW welding certificate
• Minimum of 5 years experience