Jobs at Baker Hughes

Job No: R158648

Partner with the best

• You will be responsible for technical direction and safe site leadership of onsite installation, operational maintenance, testing, troubleshooting, commissioning & startup activities on Turbo Machinery and Process Equipment and systems in accordance with engineering best practice and contractual work scope requirements.

As a Control Field Specialist in the IET business, you will be responsible for:

• Carrying out Control panel commissioning, logic modifications, loop & functional checks, panel certification and upgrades.
• Providing Technical clarification and supervision to the client on BH rotating equipment (HDGT, Aero GT and Compressors).
• Supervision of all troubleshooting, commissioning, and startup activities of BH products (HDGT, Aero GT and Compressors) as related to Control engineering during outages.
• Direct interfacing with BH Engineering on all matters relating to equipment reliability, operations, maintenance, and failure analysis.
• Providing direction and assistance to work groups to meet assigned objectives
• Coordinating and overseeing work at the field site, providing quality service to the customer.
• Collaborating with others crew members to the Installation and/or Maintenance activities of Customer Equipment in the Field at Customer Sites.
• Executing all required responsibilities safely and as instructed by direct supervisors and following all IET Service applicable processes and procedures.
• Providing all required records of all activities accomplished at Customer Site to the Baker Hughes IET Supervisor and promotes and maintains good team relations.
• Making recommendations on findings, reviewing effectiveness of maintenance actions to identify future needs
• Overseeing, overhaul, troubleshooting, commissioning, and start-up of rotating equipment (Baker Hughes portfolio products) at customer sites
• Coordinating the cleanup, repair, and preparation of equipment for the next job.
• Conducting all business activities in accordance with Baker Hughes Core Values (HSE, Quality and Compliance).

Fuel your passion
To be successful in this role you must:

• Have a Bachelor’s Degree in Electrical Engineering, Electronics Engineering, Computer Engineering, or related field is preferred.
• Have a minimum of 8 years’ experience in Turbomachinery Controls system and field instrumentation.
• Be capable to demonstrate strong working experience on at least two of the following GE/BH control systems - MKV, MKVI, MKVIe, Rx3i, GE Fanuc.
• Be capable to demonstrate experience in commissioning & startup of a GE or BH Turbomachinery equipment with Speedtronics MKV, MKVI, MKVIe, RX3i, or GE Fanuc control system
• Be capable of working independently as a Control specialist and field Instrumentation specialist.
• Have experience working on Turbomachinery equipment – Heavy Duty Gas Turbine, Aeroderivative Gas Turbines, Centrifugal compressors, etc.
• Be willing to travel for work up to 70% of the time.
• Have good Functional / Technical, Customer Focus, Communication, Interpersonal, and Team working skills.

go to method of application »

Job No: R158838

Partner with the best

• You will be responsible for technical direction and safe site leadership of onsite installation, operational maintenance, testing, troubleshooting, commissioning & startup activities on Turbo Machinery and Process Equipment and systems in accordance with engineering best practice and contractual work scope requirements.

As a Control Field Specialist in the IET business, you will be responsible for

• Carrying out Control panel commissioning, logic modifications, loop & functional checks, panel certification and upgrades.
• Providing Technical clarification and supervision to the client on BH rotating equipment (Gas Turbines and Compressors).
• Supervision of all troubleshooting, commissioning, and startup activities of BH products (HDGT, Aero GT and Compressors) as related to Control engineering during outages.
• Direct interfacing with BH Engineering on all matters relating to equipment reliability, operations, maintenance, and failure analysis.
• Providing direction and assistance to other work groups to meet assigned objectives
• Coordinating and overseeing work at the field site, providing quality service to the customer.
• Collaborating with others crew members to the Installation and/or Maintenance activities of Customer Equipment in the Field at Customer Sites.
• Executing all required responsibilities safely and as instructed by direct supervisors and following all IET Service applicable processes and procedures.
• Providing all required records of all activities accomplished at Customer Site to the Baker Hughes IET Supervisor and promotes and maintains good team relations.
• Making recommendations on findings, reviewing effectiveness of maintenance actions to identify future needs
• Overseeing, overhaul, troubleshooting, commissioning, and start-up of rotating equipment (Baker Hughes portfolio products) at customer sites
• Coordinating the cleanup, repair, and preparation of equipment for the next job.
• Conducting all business activities in accordance with Baker Hughes Core Values (HSE, Quality and Compliance).

Fuel your passion
To be successful in this role you must:

• Have a Bachelor’s Degree in Electrical Engineering, Electronics Engineering, Computer Engineering, or related field is preferred.
• Have a minimum of 5 years’ experience in Electrical systems, Turbomachinery Controls system, and field instrumentation.
• Must be capable to demonstrate strong working experience of the following: ABB integrated eHouse solution Power Management System PMS ABB certification on MV & LV switchgear (added advantage) Knowledge of Arc duct venting system for MV switchgear (added advantage) SF6 CB working knowledge and maintenance (added advantage) MV switchgear, LV switchgear,  Fire & gas systems, UPS & DC Battery System At least two of the following GE/BH systems - MKVIe, Rx3i, GE Fanuc.
• Be capable to demonstrate experience in commissioning & startup of a GE or BH Turbomachinery equipment with MKVIe, RX3i, or GE Fanuc control system
• Be capable of working independently as a Control specialist and field Instrumentation specialist.
• Be willing to travel for work up to 70% of the time.
• Have good Functional / Technical, Customer Focus, Communication, Interpersonal, and Team working skills.

go to method of application »

Job No: R160724

Fuel your passion

• The Quality Control Inspector performs quality inspection activities related to the manufacture, service, repair and refurbishment of Subsea Equipment, to verify and assure compliance with Baker Hughes specifications and requirements.
• Reporting to the Site Quality Lead, the QC Inspector is responsible for receipt inspection, in-process inspection and final release inspection activities and for creating and maintaining records of such activities in accordance with documented requirements.
• The QC Inspector performs witness and verification of equipment undergoing acceptance testing and reviews the results of such tests for compliance with requirements.
• The QC Inspector records and reports non-conforming product identified in the course of inspection activities and quarantines such items for authorized disposition.

As a Quality Control Inspector, you will be responsible for:

• Maintaining product standards through the application of rigorous inspection techniques.
• Inspecting new manufacture supplier provided parts, supplier repaired / refurbished parts and intra-company supplied parts, including supporting documentation to verify compliance with specified technical requirements referenced within relevant drawings, specifications and standards.
• Inspecting components, sub-assemblies, assemblies and associated documentation to confirm compliance with Baker Hughes specifications and standards.
• Performing inspection activities at supplier premises, or other off-site locations, when required
• Creating and maintaining accurate records of inspection activities.
• Using, controlling and caring for inspection metrology equipment and ensuring the valid calibration status of such items.
• Systematic follow-up of Assembly and Refurbishment activities utilizing ITPs and other documentation for proper control.
• Identifying, controlling and reporting, via the Non Conformance Management (NCM), non-conforming product.
• Identifying and driving continuous improvement opportunities
• Participating in root cause analysis, non-conformance analysis, customer issue resolution analysis and other continuous improvement activities aimed at reducing cost of quality, improving on time delivery and customer satisfaction.
• Adherence to and compliance with company and regulatory Quality management system requirements at all times.
• Adherence to and compliance with company and regulatory HSE requirements & expectations always
• Carry out any other assigned jobs as required.

To be successful in this role you will:

• Have at least Bachelor's Degree from an accredited university or college
• Have 3 years minimum experience in a similar quality role and experience in the Oil and Gas industry
• Have detailed knowledge of inspection and metrology techniques and processes
• Have an engineering background, such as time-served mechanical or electrical technician 
• Have a thorough understanding of manufacturing drawings, geometric and dimensional tolerances and specifications.
• Knowledge of and familiarity with relevant company and industry standards
• Detailed knowledge of requirements associated with the control of monitoring and measuring devices.
• Able to generate concise and detailed reports of inspection findings
• Familiar with the use of Microsoft Office applications
• Experienced and familiar with the requirements of formal Quality Management Systems and standards, such as ISO 9001:2015, API Q1 and API Q2
• Familiar with industry standards such as API, ISO etc.
• Good communication skills
• Flexible attitude to working patterns
• Willingness and ability to travel.