Jobs at Flour Mills of Nigeria Plc

Purpose 

• To carry out mechanical repairs, fabrication, installation, and maintenance of plant equipment to ensure continuous operations, equipment reliability, and compliance with safety, quality, and food safety standards.

The Job

• Repair and service machines in the mills and head house to ensure continuous plant operations.
• Fabricate machine parts and components required for maintenance and repair activities.
• Clean and maintain machines to support hygiene, quality, and food safety requirements.
• Carry out the erection, installation, troubleshooting, and commissioning of machines and equipment.
• Develop and execute maintenance schedules to ensure equipment reliability and minimize downtime.
• Conduct diagnostic tests on malfunctioning equipment to identify root causes and implement corrective actions.
• Replace damaged, worn, or defective structural and mechanical components as required.
• Perform preventive and corrective maintenance activities in line with maintenance plans and operational requirements.
• Ensure compliance with all workplace safety regulations and company procedures.
• Report all Quality and Food Safety concerns to the Food Safety Team.

Qualifications

• 5 O-Level credits, including Mathematics and English/ NABTEB, or Trade Test Grade I to III in Technical, Welding, Fabrication, or a related technical discipline.

Experience:​

• Minimum of two years cognate experience in mechanical maintenance, welding, fabrication, or industrial equipment repairs.

The Person Must:​

• Possess sound mechanical fitting and welding skills.
• Demonstrate strong troubleshooting and fault-diagnosis capabilities.
• Be able to read and interpret technical drawings and maintenance instructions.
• Have good fabrication and equipment installation skills.
   

go to method of application »

Purpose 

• To carry out efficient roll change, roll preparation, maintenance, installation, and repair of roller mills and associated equipment to ensure continuous operations, optimal extraction performance, and minimal production downtime.

The Job​

• Carry out roll change, preparation, installation, and maintenance activities on roller mills and associated equipment.
• Maintain roller mills to achieve targeted extraction rates and optimal milling performance.
• Conduct routine inspections of roller mills and related equipment to identify potential faults and prevent breakdowns.
• Troubleshoot mechanical issues and carry out corrective actions to restore equipment performance.
• Stop and eliminate air and material leakages to support mill optimization and improve operational efficiency.
• Fabricate parts required for maintenance and repair activities.
• Maintain daily records and reports of all roll and roller mill activities.
• Ensure all roll preparation and maintenance jobs are performed safely and hygienically.
• Maintain cleanliness and housekeeping of the work environment to support food safety and operational standards.

Qualification

• Minimum of SSCE, 5 O’Level credits, including Mathematics and English, NABTEB, or Trade Test I to III in Mechanical Engineering or a related discipline.

Experience:​​

• Minimum of two years cognate experience in mechanical maintenance, roll change, roller mill maintenance, or a similar manufacturing environment.

The Person Must:​​

• Possess sound mechanical maintenance and troubleshooting skills.
• Have basic fabrication and equipment repair knowledge.
• Demonstrate strong attention to detail and commitment to quality workmanship.
• Be able to work under pressure and respond effectively to operational demands.

go to method of application »

Purpose 

• To coordinate payment processing activities by ensuring all vendor and contractor invoices are properly verified, documented, approved, and accurately processed.
• The role also supports procurement, inventory administration, payroll input preparation, and general depot administration to ensure smooth and efficient depot operations.

The Job​

• Review and verify vendor invoices, ensuring all supporting documents are complete and accurate before processing.
• Process payments for vendors, suppliers, transporters, and casual workers in line with approved procedures and timelines.
• Perform three-way matching of Purchase Orders, waybills, and invoices to ensure payment accuracy and compliance.
• Maintain accurate and organized records of invoices, payment documents, and other finance-related records.
• Administer petty cash transactions and ensure timely reimbursement in accordance with company policy.
• Raise Purchase Requisitions (PRs) and Store Requisition Vouchers (SRVs) and follow up on the timely delivery of requested items.
• Participate in monthly stock count exercises and ensure inventory records are accurate and up to date.
• Prepare payroll input data, including attendance, overtime, and headcount information, to support accurate salary processing.

Qualification

• Minimum of National Diploma (ND) in Accounting, Finance, Business Administration, or any Social Science-related discipline.

Experience:​​

• Minimum of two years cognate experience in accounting, finance, administration, or related functions.

The Person Must:​

• Possess strong numerical and analytical skills with high attention to detail.
• Demonstrate integrity, accountability, and sound judgment in handling financial transactions.
• Have good record-keeping and documentation skills.
• Be proficient in Microsoft Office applications, particularly Excel and Word.

go to method of application »

Purpose 

• To ensure efficient milling operations for the production of high-quality flour that meets or exceeds customer expectations, safety standards, and company production targets.

The Job​

• Enforce strict adherence to Health, Safety, and Environmental regulations within the milling environment.
• Monitor and supervise the receipt and quality of raw materials to ensure smooth milling operations.
• Supervise Milling Assistant and ensure optimal performance across assigned production areas.
• Implement on-the-job training and skills development for milling staff to enhance operational efficiency.
• Monitor and ensure effective operation of cleaning machines and pre-milling sections.
• Maintain accurate and up-to-date production records and operational documentation.
• Ensure optimum milling performance, including extraction rate and production efficiency.
• Maintain high standards of hygiene, sanitation, and housekeeping across the production area.
• Identify, minimize, and report unplanned downtime to improve plant availability and productivity.
• Report all quality, food safety, and safety incidents in line with FSMS requirements and company policies.

Qualification

• 5 O-Level credits, including Mathematics and English/ NABTEB
•  OND in Engineering or Science discipline OR Intermediate & Final NABIM Certification.

Experience:​​

• Minimum of three years cognate experience in milling or a related production environment.

The Person Must:​ ​

• Demonstrate strong leadership and supervisory ability in a production environment.
• Possess strong attention to detail and commitment to quality standards.
• Have good knowledge of Health, Safety, and Food Safety Management Systems (FSMS).
• Show strong problem-solving and decision-making skills under pressure.

go to method of application »

Purpose

• To carry out layout, installation, repair, finishing, and maintenance of wooden structures, fixtures, and fittings across the organization to support smooth operational activities and infrastructure upkeep.

The Job​

• Construct and repair wooden structures such as pallets, storage boxes, and other wood-based installations.
• Design and install cabinets, shelving units, fitted furniture, drywall, and insulation structures.
• Install fixtures and fittings, including door handles, locks, hinges, and closures.
• Select appropriate lumber based on size, strength, and job requirements, ensuring cost-effectiveness.
• Take accurate measurements and calculate required materials for each job.
• Determine and calculate the required number of fasteners and consumables per task.
• Carry out structural alterations, including building or dismantling partitions and wooden frameworks.
• Perform scheduled maintenance and repairs on existing wooden structures and fittings.
• Ensure compliance with Health, Safety, and Food Safety Management System (FSMS) requirements in all tasks.
• Report safety violations, hazards, and FSMS-related issues in line with company policies and procedures.

Qualification

• WAEC/NABTEB with a minimum of five (5) credit passes, including Mathematics and English Language, or Trade Test I to III

Experience:​​​

• Minimum of two years cognate experience in carpentry or related technical work.

The Person Must:​​

• Be skilled in carpentry tools, techniques, and woodwork fabrication.
• Demonstrate strong attention to detail and accuracy in measurements and finishing.
• Be safety-conscious and compliant with workplace safety regulations.
• Be able to interpret technical drawings and job specifications.
• Possess good problem-solving and practical repair skills.

go to method of application »

Purpose

• To ensure efficient operation, maintenance, and reliability of all air compressors, air conditioning, refrigeration, and ventilation systems to support uninterrupted plant operations.

The Job​

• Monitor daily compressor parameters including oil temperature, oil level, outlet temperature, pressure levels, and system alarms.
• Conduct daily inspection for air and oil leakages in all compressor systems.
• Clean air filters weekly using low-pressure air to prevent damage and ensure optimal performance.
• Inspect and maintain electronic water drain (EWD) systems and manually drain condensate where necessary.
• Perform daily cleaning of the compressor room to maintain a safe and hygienic working environment.
• Inspect air conditioning units for leakages, abnormal noise, and performance issues, and report faults promptly.
• Execute routine maintenance, servicing, and repairs of all AC, refrigeration, and compressor systems.
• Maintain accurate records of all maintenance activities, inspections, and repairs carried out.
• Coordinate with external HVAC contractors and service providers to ensure system efficiency and uptime.
• Ensure full compliance with safety standards and promptly report hazards, faults, or unsafe conditions.

Qualification

• Trade Test I to III Certificate, City & Guilds (C&G), or OND in a relevant field (Mechanical/Electrical/HVAC Engineering)

Experience:​​​

• Minimum of two years cognate experience in HVAC, compressor maintenance, or industrial technical operations.

The Person Must:​​

• Possess strong technical knowledge of HVAC, compressor systems, and refrigeration units.
• Demonstrate ability to diagnose and resolve mechanical and electrical faults quickly.
• Be detail-oriented with strong preventive maintenance skills.
• Demonstrate strong safety awareness and adherence to workplace safety standards.

go to method of application »

Purpose

• To install, maintain, and repair electrical systems and machinery to ensure safe, efficient, and uninterrupted depot operations in line with organisational productivity objectives.

The Job​

• Carry out maintenance and repair of electrical machines and systems to minimize downtime.
• Perform routine inspection of machinery and submit detailed reports to the Milling Engineer.
• Collect required materials from stores to support maintenance and repair activities.
• Record and monitor electrical equipment readings for analysis and performance evaluation.
• Wire and maintain electrical panels according to specifications to prevent electrical hazards and fire risks.
• Execute planned preventive maintenance on electrical systems and machinery.
• Maintain clean and safe work areas through proper housekeeping practices.
• Respond promptly to emergency breakdowns and repair requests to ensure operational continuity.
• Ensure compliance with Health, Safety, and Environmental (HSE) standards and FMN Lifesaving Rules.
• Report all faults, safety violations, and behavioural risks to the Safety Department and relevant supervisors.

 Qualification

• 5 O-Level credits, including Mathematics and English/ NABTEB, or Trade Test Grade I to III and OND in Electrical Engineering or related field

Experience:​​​

• Minimum of two years cognate experience in electrical maintenance or industrial operations.

The Person Must:​ ​

• Be technically skilled in electrical installation, maintenance, and troubleshooting.
• Demonstrate strong fault-finding and problem-solving abilities under pressure.
• Be able to read and interpret electrical drawings and technical manuals.
• Be able to respond quickly and effectively to emergency breakdown situations.
• Demonstrate strong attention to detail and accuracy in wiring and installation.

go to method of application »

Purpose

• To supervise and execute cost-effective and efficient mechanical maintenance, repair, and servicing of all machinery in the mills and mechanical workshop to ensure uninterrupted operations and optimal equipment performance.

The Job​

• Supervise maintenance and breakdown repairs of all depot machinery to ensure smooth operational continuity.
• Lead preventive and corrective maintenance activities to reduce machine downtime.
• Attend to breakdowns on key equipment such as conveyor systems, elevators, and plant generators.
• Perform routine maintenance of silo, seaside, and production machinery to ensure reliability.
• Install, service, and maintain industrial equipment including pumps, motors, valves, lifts, HVAC systems, and related components.
• Monitor mechanical operations to ensure compliance with quality standards, safety requirements, and SOPs.
• Implement cost-effective maintenance strategies to improve equipment reliability and operational safety.
• Coordinate with site engineers to communicate existing faults and anticipate potential mechanical issues.

Qualification

• 5 O-Level credits, including Mathematics and English/ NABTEB
•  OND in Engineering
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:​​​

• Minimum of three years cognate experience in mechanical maintenance or industrial operations.

 The Person Must:​ ​

• Possess strong technical knowledge of mechanical systems, industrial machinery, and maintenance practices.
• Demonstrate strong leadership and ability to supervise technical teams effectively.
• Be highly skilled in troubleshooting and resolving mechanical breakdowns under pressure.
• Have strong understanding of preventive maintenance systems and reliability engineering.

go to method of application »

Purpose

• To carry out maintenance of machinery and fabrication of parts, as well as operate Bobcat equipment to support smooth and continuous operations within the flour production and depot environment.

The Job

• Operate Bobcat equipment safely and efficiently to support site operations and material handling activities.
• Carry out breakdown repairs on mechanical equipment to minimize operational downtime.
• Perform routine maintenance on machinery within the silo, production, and seaside operational areas.
• Test run and inspect conveyor belts, elevators, and related systems to ensure optimal functionality.
• Fabricate and repair machine parts to support maintenance and operational continuity.
• Communicate equipment faults and potential mechanical issues to the Site Engineer promptly.
• Implement preventive maintenance measures to reduce machine breakdowns and downtime.
• Maintain accurate records of machine service history and maintenance activities.
• Ensure compliance with Health, Safety, Environmental (HSE), and food safety requirements during all operations.
• Support housekeeping, hygiene, and safe working practices within the operational environment.

Qualification

• Minimum of SSCE, 5 O’Level credits, including Mathematics and English, NABTEB, or Trade Test I to III in Mechanical Engineering or a related discipline.

Experience:​

• Minimum of two years cognate experience in mechanical maintenance or equipment operation.

The Person Must:​ ​

• Be skilled in mechanical maintenance and basic fabrication techniques.
• Be competent in operating Bobcat or similar heavy-duty equipment.
• Demonstrate strong awareness of workplace safety and operational hazards.
• Be able to perform troubleshooting and basic repair of industrial machinery.

go to method of application »

Purpose

• To carry out maintenance, troubleshooting, and repair of machinery, as well as fabrication of parts, to ensure the continuous and efficient operation of equipment within the flour milling plant.

The Job​

• Perform breakdown repairs on milling machinery to minimize downtime and ensure uninterrupted operations.
• Carry out routine preventive maintenance on mechanical equipment to improve reliability and efficiency.
• Respond promptly to maintenance requests and equipment faults during assigned shifts.
• Troubleshoot mechanical and basic electrical control issues to restore equipment functionality.
• Identify potential equipment failures and implement preventive measures to avoid unplanned downtime.
• Analyze machine performance and test results, adjusting meet operational specifications.
• Maintain accurate records of maintenance activities, repairs, and machine service history.
• Coordinate the sourcing and collection of materials and spare parts required for maintenance activities.
• Report equipment issues, safety concerns, and operational risks to the Mechanical Supervisor and relevant stakeholders.

Qualification

• 5 O’Level credits, including Mathematics and English or Trade Test I to III in Mechanical Engineering or a related discipline.
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:​​

• Minimum of three years cognate experience in industrial mechanical maintenance.

The Person Must:​​

• Possess strong mechanical troubleshooting and repair skills in an industrial environment.
• Demonstrate the ability to work effectively under pressure and respond quickly to breakdown situations.
• Have good knowledge of preventive maintenance practices and equipment reliability principles.
• Be safety-conscious with a strong commitment to operational excellence and continuous improvement.

go to method of application »

Purpose

• To receive incoming wheat, ensure proper storage within designated silos, and transfer the correct wheat types to the pre-cleaning sections to support efficient and uninterrupted flour production operations.

The Job​

• Receive incoming wheat and ensure it is transferred to the appropriate silos according to specifications.
• Monitor and maintain wheat quality, temperature, and storage conditions within the silos.
• Coordinate wheat transfers to pre-cleaning bins and production areas in collaboration with millers.
• Conduct routine checks on silo machinery, elevators, conveyors, and related equipment to ensure operational efficiency.
• Monitor silo capacity levels and prevent overfilling or stock misplacement.
• Perform regular stock counts and verify the accurate identification and placement of wheat inventory.
• Ensure pre-cleaning bins are supplied with the correct wheat types to support production requirements.
• Collect and submit wheat samples to the laboratory at scheduled intervals for quality analysis.
• Ensure compliance with Standard Operating Procedures (SOPs), Food Safety Management System (FSMS) requirements, and Health, Safety, and Environmental (HSE) standards.

Qualification

• 5 O-Level credits, including Mathematics and English.
•  OND in Engineering or Science discipline
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:​​​

• Minimum of two years cognate experience in industrial mechanical maintenance.

The Person Must:​ ​

• Possess good knowledge of grain handling, storage operations, and stock control processes.
• Demonstrate strong attention to detail and accuracy in inventory monitoring and wheat transfers.
• Have strong problem-solving skills to support efficient production operations.