Never pay for any CBT, test or assessment as part of any recruitment process. When in doubt, contact us
HUPE NIGERIA LIMITED was registered in Nigeria in 1999 and commenced business in Nigeria’s oil and gas sectors the same year.
In the last six years, the emphasis has swung away from these traditional industries and now HUPE NIGERIA LIMITED enjoys an international reputation as one of Nigeria’s foremost engineering companies.
The group serves a ...
Read more about this company
- Contents
- Open Jobs
- Planning Technician
- Technician
- Asst.Technician, Machinery
- Senior Technician, Materials
- Asst. Technician, Tool Shop
- Fabrication Technician
- Senior Technician, Planning
- Technician PSV/QA/QC.
- Senior Technician
- Senior Technician, Fabrication
- Material Technician
- Asst. Technician CAT
- Asst.Technician, Heavy Equipment
- Asst. Technician, HVAC
- Planning Technician
- Technician
- Asst.Technician, Machinery
- Senior Technician, Materials
- Asst. Technician, Tool Shop
- Fabrication Technician
- Senior Technician, Planning
- Technician PSV/QA/QC.
- Senior Technician
- Senior Technician, Fabrication
- Material Technician
- Asst. Technician CAT
- Asst.Technician, Heavy Equipment
- Asst. Technician, HVAC
-
Method of Application
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 3 years
- Location Not specified
- Job Field
- Review and validate clarity of work requests. Build plans that minimize equipment downtime and maximize safe/efficient/effective use of resources.
- Initiate the interface between maintenance and other business areas to develop an integrated plan
- Initiate procurement requisitions and track status of materials and contract services
- Facilitate planning meetings as required.
- Develop standard plans and maintain library
Requirements
- 3 - 9 years HND or equivalent.
- Experience in the maintenance, repairing and testing equipment and machinery.
- Experience in use and operation of a recognized computerized maintenance management system. SAP experience preferred.
- Knowledge of plant shutdown planning requirements and procedures.
- Working knowledge of established computerized planning and scheduling tools, such as, SAP, Primavera, Microsoft Project, and Materials Management software like EMA.
- Ability to read and understand technical drawings (P&IDs, PFDs, SLDs) and vendor documentation.
- Good written and spoken English.
go to method of application »
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 3 years
- Location Not specified
- Job Field
- Assist in equipment maintenance and operation as needed as well as all associated required documentation activities.
- Provides preventative and corrective field mechanical service on oilfield production equipment and controls.
- Follows all Health, Safety and Environmental procedures.
- Possesses a strong knowledge of production equipment and comprehensive mechanical, diagnostic, and analytical skills.
- Responsible for submitting accurate maintenance reports and other necessary paperwork.
- 3-9 years process, production and equipment related experience.
- High National Diploma or equivalent.
- Possess thorough knowledge of production equipment, as well as electrical systems, including pneumatic controls.
- Proficient in using Microsoft Word, Excel, and PowerPoint.
- Must be able to work in a fast-paced, high-pressure environment.
- Must be able to work with the team in developing improved work processes for the department.
go to method of application »
- Rebuilding of various types of pumps for onshore and offshore operations
- Rebuilding of compressors and blowers
- Balancing of rotors for various machines
- Alignment on onshore / offshore machines
Requirements
- A high level of technical knowledge and strong practical skills
- good problem-solving skills
- the ability to work alone and as part of a team
- the ability to follow set procedures
- computer skills
- good communication skills
- a sound knowledge of health and safety regulations.
- Prepare and set up equipment for operatives, either manually or by programming settings
- respond to sudden breakdowns during a production run
- diagnose problems quickly and fix faults on site
- reassemble and test machinery to make sure it is safe to go back into production
- carry out planned maintenance, for example checking circuitry
- clean, oil and grease machinery
- record work in detail and inform shift managers of progress or problems.
go to method of application »
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 10 years
- Location Not specified
- Job Field
- Receive and issue materials (tools,stationery etc), conduct quarterly physical inventory of items, liaise with Procurement on outstanding orders.
- Coordinates materials documentation ( completed jobs) and movement from QIT Maintenance shop to various work locations.
- Keeps track of all sent and received items and follows up documentation with Logistics group
- Receives all materials coming into maintenance for repair /return and those meant for junking.
- Sends to all turbines and associated components for repair and return and follows up with vendor until it is returned back to MPN
- 10+ years HND or equivalent.
- Issuance of stock to end users at plant sites
- Completion and distribution of all paperwork for same
- Maintains control documents all material located in store and transferred
- Promote the replacement of materials when they reach the minimum acceptable level.
- On site testing, monitoring of construction materials
go to method of application »
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 3 years
- Location Not specified
- Job Field
- Keeping inventory of all tools
- Issuing of tool and ensuring that they are returned back to store after use
- Ordering of tools for replenishment of tools stock
- Keeping track of damaged or worn out tools
- Maintain a clean and safe working environment for Tool Setup
- Coordinate tool testing and evaluation with suppliers
- Review periodically tool cost and efficiencies
- Interested candidate should possess OND certificate
- 3 - 9 years of experience can apply.
- Three years of CNC machining, machine shop experience
- Engineering drawing and blueprint reading ability is required
- Detail oriented, accurate,and thorough
- Proficient in database use
- Work well with others under pressure
- Demonstrate Good Problem solving Skills
- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
- Ability to write quality tags and make detailed notes in communication logs
- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
go to method of application »
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 3 years
- Location Not specified
- Job Field
1. Develop and implement fabrication processes and procedures.
2. Develop and implement ITP.
3. Review AFC drawings.
4. Review and advise on approved welding procedures.
5. Identifies and monitors key measures for improvement opportunities within fabrication process.
- 3 - 9 years Fabrication and Welding experience.
- A steel fabricator has to have skills in welding, soldering and metallurgy.
- Ability to interpret blueprints and technical drawings to correctly assemble products.
- Oral communication abilities are needed to effectively work with other fabricators
go to method of application »
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 10 years
- Location Not specified
- Job Field
- Review and validate clarity of work requests.
- Build plans that minimize equipment downtime and maximize safe/efficient/effective use of resources.
- Initiate the interface between maintenance and other business areas to develop an integrated plan
- Initiate procurement requisitions and track status of materials and contract services
- Facilitate planning meetings as required.
- Develop standard plans and maintain library
- 10+ years HND or equivalent.
- Experience in the maintenance, repairing and testing equipment and machinery.
- Experience in use and operation of a recognized computerized maintenance management system. SAP experience preferred.
- Knowledge of plant shutdown planning requirements and procedures.
- Working knowledge of established computerized planning and scheduling tools, such as, SAP, Primavera, Microsoft Project, and Materials Management software like EMA.
- Ability to read and understand technical drawings (P&IDs, PFDs, SLDs) and vendor documentation.
- Good written and spoken English.
go to method of application »
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 2 years
- Location Not specified
- Job Field
- Carries out routine checks of all audiovisuals in the storeroom and ensure that they are in good working condition for any emergency need.
- Carries out routine checks of audiovisuals in each classroom at TTC to ensure that they are in good working condition.
- Assists training instructors in setting up audio visuals for training classes
- Assists clients department in setting up and operating audio visual equipment as needed
- Carries out reproduction of training video tapes, transparency slides etc. for instructors as needed
- Two years working experience in facility maintenance
- Basic understanding of electrical,plumbing and carpentry is a plus.
- Electrical Certification Preferred
- Proven experience in the maintenance and repair of “like equipment" which includes of Air Compressors, Steam Generators, Back-Up Generators, HVAC and Refrigeration Equipment, and DI water systems is a plus
go to method of application »
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 10 years
- Location Not specified
- Job Field
- Assist in equipment maintenance and operation as needed as well as all associated required documentation activities.
- Provides preventative and corrective field mechanical service on oilfield production equipment and controls.
- Possesses a strong knowledge of production equipment and comprehensive mechanical, diagnostic, and analytical skills.
- Follows all Health, Safety and Environmental procedures.
- 10 years process, production and equipment related experience and/or training.
- Possess BSc or HND.
- Possess thorough knowledge of production equipment, as well as electrical systems, including pneumatic controls.
- Proficient in using Microsoft Word, Excel, and Outlook.
- Must have a valid Driver's License and a clean driving record.
go to method of application »
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 10 years
- Location Not specified
- Job Field
1. Develop and implement fabrication processes and procedures
2. Develop and implement ITP
3. Review AFC drawings
4. Review and advise on approved welding procedures
5. Identifies and monitors key measures for improvement opportunities within fabrication process.
- 10+ years Fabrication and Welding experience
- A steel fabricator has to have skills in welding, soldering and metallurgy.
- Ability to interpret blueprints and technical drawings to correctly assemble products.
- Oral communication abilities are needed to effectively work with other fabricators
go to method of application »
- Job Type Full Time
- Qualification BA/BSc/HND
- Experience 3 years
- Location Not specified
- Job Field
- Receive and issue materials (tools,stationery etc), conduct quarterly physical inventory of items, liaise with Procurement on outstanding orders.
- Coordinates materials documentation ( completed jobs) and movement from QIT Maintenance shop to various work locations.
- Keeps track of all sent and received items and follows up documentation with Logistics group
- Receives all materials coming into maintenance for repair /return and those meant for junking.
- Sends to all turbines and associated components for repair and return and follows up with vendor until it is returned back to MPN.
- 3 - 9 years HND or equivalent.
- Issuance of stock to end users at plant sites
- Completion and distribution of all paperwork for same
- Maintains control documents all material located in store and transferred
- Promote the replacement of materials when they reach the minimum acceptable level.
- On site testing, monitoring of construction materials
go to method of application »
- Overhaul of all MPN CAT generators
- Carry out troubleshooting and break down maintenance on all MPN CAT generators onshore/ offshore
- Conduct PM on MHE, MGH, Air Strip, Pegasus School, Uyo Liaison office and Mopol Camp generators.
- Conduct PM and carry out break down maintenance on Eket Air strip, Pegasus School, MHE & MGH water pumps, sewage and chiller compressors,
- Interested candidates should have the following certificate FSL Certificate plus TT, WASC plus TT, C&G part 2 plus or OND Mech Engineering.
- 3 - 10 years of experience can apply
- Troubleshooting and diagnosing equipment malfunctions and failures.
- Repairing, reconditioning and maintaining equipment and components.
- Preparing service reports.
- Planning and controlling cost of repair jobs.
- Working safely at all times by adhering to all applicable safety policies and complying with all company policies, procedures and standards.
- Direct workers who are assembling or disassembling equipment or cleaning parts.
- Schedule maintenance for industrial machines and equipment, and keep equipment service records.
go to method of application »
- Carry out PMs and breakdown maintenance on MPN trucks in QIT and BRT
- PM and breakdown maintenance on all mechanical & electric forklifts in QIT and BRT
- PM and break down maintenance on all mobile cranes and welding machines
- PM and break down maintenance on emergency vehicles-Fire, ambulance and vacuum trucks.
- Interested candidate should have up to 3 - 10 years experience.
- Should possess FSL Certifcate plus TT, C&G part 2, OND Mechanical Engineering
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
- Repair and replace damaged or worn parts.
- Operate and inspect machines or heavy equipment in order to diagnose defects.
- Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
- Dismantle and reassemble heavy equipment using hoists and hand tools.
- Clean, lubricate, and perform other routine maintenance work on equipment.
- Schedule maintenance for industrial machines and equipment, and keep equipment service records.
- Read and understand operating manuals, blueprints, and technical drawings.
- Overhaul and test machines or equipment to ensure operating efficiency etc.
go to method of application »
- Install, maintain and Repair Domestic and Industrial HVAC & R units.
- Maintenance and Repair of Chiller units, Fridges and Freezers including Walk-in-Freezers.
- Installation, maintenance and Repairs of Jet Sprays, Ice blocks/Ice cream makers, water fountains etc.
- At least 2-10 years experience would be desirable.
- Should possess any of the following certificate; FSL Cert plus TT,WASC plus, C&G part 2 plus TT, OND-Mech
- Must have excellent working knowledge of both heating and air conditioning systems with the ability to troubleshoot and repair same.
- Troubleshooting and repair of heating, air conditioning and ventilation systems in small, medium and large commercial buildings
- Practical knowledge of start-up and commissioning of building automation systems
go to method of application »
- Review and validate clarity of work requests. Build plans that minimize equipment downtime and maximize safe/efficient/effective use of resources.
- Initiate the interface between maintenance and other business areas to develop an integrated plan
- Initiate procurement requisitions and track status of materials and contract services
- Facilitate planning meetings as required.
- Develop standard plans and maintain library
Requirements
- 3 - 9 years HND or equivalent.
- Experience in the maintenance, repairing and testing equipment and machinery.
- Experience in use and operation of a recognized computerized maintenance management system. SAP experience preferred.
- Knowledge of plant shutdown planning requirements and procedures.
- Working knowledge of established computerized planning and scheduling tools, such as, SAP, Primavera, Microsoft Project, and Materials Management software like EMA.
- Ability to read and understand technical drawings (P&IDs, PFDs, SLDs) and vendor documentation.
- Good written and spoken English.
go to method of application »
- Assist in equipment maintenance and operation as needed as well as all associated required documentation activities.
- Provides preventative and corrective field mechanical service on oilfield production equipment and controls.
- Follows all Health, Safety and Environmental procedures.
- Possesses a strong knowledge of production equipment and comprehensive mechanical, diagnostic, and analytical skills.
- Responsible for submitting accurate maintenance reports and other necessary paperwork.
- 3-9 years process, production and equipment related experience.
- High National Diploma or equivalent.
- Possess thorough knowledge of production equipment, as well as electrical systems, including pneumatic controls.
- Proficient in using Microsoft Word, Excel, and PowerPoint.
- Must be able to work in a fast-paced, high-pressure environment.
- Must be able to work with the team in developing improved work processes for the department.
go to method of application »
- Rebuilding of various types of pumps for onshore and offshore operations
- Rebuilding of compressors and blowers
- Balancing of rotors for various machines
- Alignment on onshore / offshore machines
Requirements
- A high level of technical knowledge and strong practical skills
- good problem-solving skills
- the ability to work alone and as part of a team
- the ability to follow set procedures
- computer skills
- good communication skills
- a sound knowledge of health and safety regulations.
- Prepare and set up equipment for operatives, either manually or by programming settings
- respond to sudden breakdowns during a production run
- diagnose problems quickly and fix faults on site
- reassemble and test machinery to make sure it is safe to go back into production
- carry out planned maintenance, for example checking circuitry
- clean, oil and grease machinery
- record work in detail and inform shift managers of progress or problems.
go to method of application »
- Receive and issue materials (tools,stationery etc), conduct quarterly physical inventory of items, liaise with Procurement on outstanding orders.
- Coordinates materials documentation ( completed jobs) and movement from QIT Maintenance shop to various work locations.
- Keeps track of all sent and received items and follows up documentation with Logistics group
- Receives all materials coming into maintenance for repair /return and those meant for junking.
- Sends to all turbines and associated components for repair and return and follows up with vendor until it is returned back to MPN
- 10+ years HND or equivalent.
- Issuance of stock to end users at plant sites
- Completion and distribution of all paperwork for same
- Maintains control documents all material located in store and transferred
- Promote the replacement of materials when they reach the minimum acceptable level.
- On site testing, monitoring of construction materials
go to method of application »
- Keeping inventory of all tools
- Issuing of tool and ensuring that they are returned back to store after use
- Ordering of tools for replenishment of tools stock
- Keeping track of damaged or worn out tools
- Maintain a clean and safe working environment for Tool Setup
- Coordinate tool testing and evaluation with suppliers
- Review periodically tool cost and efficiencies
- Interested candidate should possess OND certificate
- 3 - 9 years of experience can apply.
- Three years of CNC machining, machine shop experience
- Engineering drawing and blueprint reading ability is required
- Detail oriented, accurate,and thorough
- Proficient in database use
- Work well with others under pressure
- Demonstrate Good Problem solving Skills
- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
- Ability to write quality tags and make detailed notes in communication logs
- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists
- Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
go to method of application »
1. Develop and implement fabrication processes and procedures.
2. Develop and implement ITP.
3. Review AFC drawings.
4. Review and advise on approved welding procedures.
5. Identifies and monitors key measures for improvement opportunities within fabrication process.
- 3 - 9 years Fabrication and Welding experience.
- A steel fabricator has to have skills in welding, soldering and metallurgy.
- Ability to interpret blueprints and technical drawings to correctly assemble products.
- Oral communication abilities are needed to effectively work with other fabricators
go to method of application »
- Review and validate clarity of work requests.
- Build plans that minimize equipment downtime and maximize safe/efficient/effective use of resources.
- Initiate the interface between maintenance and other business areas to develop an integrated plan
- Initiate procurement requisitions and track status of materials and contract services
- Facilitate planning meetings as required.
- Develop standard plans and maintain library
- 10+ years HND or equivalent.
- Experience in the maintenance, repairing and testing equipment and machinery.
- Experience in use and operation of a recognized computerized maintenance management system. SAP experience preferred.
- Knowledge of plant shutdown planning requirements and procedures.
- Working knowledge of established computerized planning and scheduling tools, such as, SAP, Primavera, Microsoft Project, and Materials Management software like EMA.
- Ability to read and understand technical drawings (P&IDs, PFDs, SLDs) and vendor documentation.
- Good written and spoken English.
go to method of application »
- Carries out routine checks of all audiovisuals in the storeroom and ensure that they are in good working condition for any emergency need.
- Carries out routine checks of audiovisuals in each classroom at TTC to ensure that they are in good working condition.
- Assists training instructors in setting up audio visuals for training classes
- Assists clients department in setting up and operating audio visual equipment as needed
- Carries out reproduction of training video tapes, transparency slides etc. for instructors as needed
- Two years working experience in facility maintenance
- Basic understanding of electrical,plumbing and carpentry is a plus.
- Electrical Certification Preferred
- Proven experience in the maintenance and repair of “like equipment" which includes of Air Compressors, Steam Generators, Back-Up Generators, HVAC and Refrigeration Equipment, and DI water systems is a plus
go to method of application »
- Assist in equipment maintenance and operation as needed as well as all associated required documentation activities.
- Provides preventative and corrective field mechanical service on oilfield production equipment and controls.
- Possesses a strong knowledge of production equipment and comprehensive mechanical, diagnostic, and analytical skills.
- Follows all Health, Safety and Environmental procedures.
- 10 years process, production and equipment related experience and/or training.
- Possess BSc or HND.
- Possess thorough knowledge of production equipment, as well as electrical systems, including pneumatic controls.
- Proficient in using Microsoft Word, Excel, and Outlook.
- Must have a valid Driver's License and a clean driving record.
go to method of application »
1. Develop and implement fabrication processes and procedures
2. Develop and implement ITP
3. Review AFC drawings
4. Review and advise on approved welding procedures
5. Identifies and monitors key measures for improvement opportunities within fabrication process.
- 10+ years Fabrication and Welding experience
- A steel fabricator has to have skills in welding, soldering and metallurgy.
- Ability to interpret blueprints and technical drawings to correctly assemble products.
- Oral communication abilities are needed to effectively work with other fabricators
go to method of application »
- Receive and issue materials (tools,stationery etc), conduct quarterly physical inventory of items, liaise with Procurement on outstanding orders.
- Coordinates materials documentation ( completed jobs) and movement from QIT Maintenance shop to various work locations.
- Keeps track of all sent and received items and follows up documentation with Logistics group
- Receives all materials coming into maintenance for repair /return and those meant for junking.
- Sends to all turbines and associated components for repair and return and follows up with vendor until it is returned back to MPN.
- 3 - 9 years HND or equivalent.
- Issuance of stock to end users at plant sites
- Completion and distribution of all paperwork for same
- Maintains control documents all material located in store and transferred
- Promote the replacement of materials when they reach the minimum acceptable level.
- On site testing, monitoring of construction materials
go to method of application »
- Overhaul of all MPN CAT generators
- Carry out troubleshooting and break down maintenance on all MPN CAT generators onshore/ offshore
- Conduct PM on MHE, MGH, Air Strip, Pegasus School, Uyo Liaison office and Mopol Camp generators.
- Conduct PM and carry out break down maintenance on Eket Air strip, Pegasus School, MHE & MGH water pumps, sewage and chiller compressors,
- Interested candidates should have the following certificate FSL Certificate plus TT, WASC plus TT, C&G part 2 plus or OND Mech Engineering.
- 3 - 10 years of experience can apply
- Troubleshooting and diagnosing equipment malfunctions and failures.
- Repairing, reconditioning and maintaining equipment and components.
- Preparing service reports.
- Planning and controlling cost of repair jobs.
- Working safely at all times by adhering to all applicable safety policies and complying with all company policies, procedures and standards.
- Direct workers who are assembling or disassembling equipment or cleaning parts.
- Schedule maintenance for industrial machines and equipment, and keep equipment service records.
go to method of application »
- Carry out PMs and breakdown maintenance on MPN trucks in QIT and BRT
- PM and breakdown maintenance on all mechanical & electric forklifts in QIT and BRT
- PM and break down maintenance on all mobile cranes and welding machines
- PM and break down maintenance on emergency vehicles-Fire, ambulance and vacuum trucks.
- Interested candidate should have up to 3 - 10 years experience.
- Should possess FSL Certifcate plus TT, C&G part 2, OND Mechanical Engineering
- Test mechanical products and equipment after repair or assembly to ensure proper performance and compliance with manufacturers' specifications.
- Repair and replace damaged or worn parts.
- Operate and inspect machines or heavy equipment in order to diagnose defects.
- Diagnose faults or malfunctions to determine required repairs, using engine diagnostic equipment such as computerized test equipment and calibration devices.
- Dismantle and reassemble heavy equipment using hoists and hand tools.
- Clean, lubricate, and perform other routine maintenance work on equipment.
- Schedule maintenance for industrial machines and equipment, and keep equipment service records.
- Read and understand operating manuals, blueprints, and technical drawings.
- Overhaul and test machines or equipment to ensure operating efficiency etc.
go to method of application »
- Install, maintain and Repair Domestic and Industrial HVAC & R units.
- Maintenance and Repair of Chiller units, Fridges and Freezers including Walk-in-Freezers.
- Installation, maintenance and Repairs of Jet Sprays, Ice blocks/Ice cream makers, water fountains etc.
- At least 2-10 years experience would be desirable.
- Should possess any of the following certificate; FSL Cert plus TT,WASC plus, C&G part 2 plus TT, OND-Mech
- Must have excellent working knowledge of both heating and air conditioning systems with the ability to troubleshoot and repair same.
- Troubleshooting and repair of heating, air conditioning and ventilation systems in small, medium and large commercial buildings
- Practical knowledge of start-up and commissioning of building automation systems
Method of Application
Interested and suitably qualified candidates should click on preferred job titles to apply online.
Build your CV for free. Download in different templates.
Gmail
Yahoomail