Never pay for any CBT, test or assessment as part of any recruitment process. When in doubt, contact us
The Nigerian National Petroleum Corporation (NNPC) is the state oil corporation which was established on April 1, 1977. In addition to its exploration activities, the Corporation was given powers and operational interests in refining, petrochemicals and products transportation as well as marketing. Between 1978 and 1989, NNPC constructed refineries in Warri,...
Read more about this company
The Nigerian National Petroleum Corporation (NNPC) is currently embarking on the construction of 40” X 614km Ajaokuta-Kaduna-Kano Gas Pipeline and Stations (AKK). The AKK Pipeline is a section of the Trans-Nigerian Gas Pipeline Network. The Segment 2 scope covering a distance of about 318.66 km of the Trans Nigeria Gas Pipeline and stations was awarded to Brentex CPP Limited for the Engineering, Procurement and Construction of Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline and Stations Project.
As an equal opportunity employer, Brentex CPP Limited welcomes applications for the position below to serve on the Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline Project (Segment 2) Operation:
Role Description
- Diagnose, repair, adjust, overhaul, maintain, and test mobile heavy-duty equipment
- Work with manufacturer's specifications for maintenance activity
- Identify and repair problems in structural, mechanical or hydraulic systems
- Ensure quick response to any breakdown to avoid delay dung operations
- Perform diagnostic tests for routine maintenance procedures
- To determine right course of action for damaged parts and system
- Repair malfunctioning components, retrofit engines, change brakes, adjust steering system, replace worn-out parts and change hydraulic fluids.
Required Certification & Course of Study
- Higher National Diploma / B.Tech / B.Eng. in Engineering or Physical Sciences
- National Business and Technical Examinations Board (NABTEB)
- City & Guild Level 3
- Years of experience: 6 years.
Skills:
- Operational knowledge of Semi-Automatic Welding Equipment, Heavy Duty Crane, and Rig Mechanism (HDD)
- Proven work experience in similar job
- Extensive knowledge of diesel engines and construction equipment
- Ability to work after-hours required
- Good communication skills.
go to method of application »
The Nigerian National Petroleum Corporation (NNPC) is currently embarking on the construction of 40” X 614km Ajaokuta-Kaduna-Kano Gas Pipeline and Stations (AKK). The AKK Pipeline is a section of the Trans-Nigerian Gas Pipeline Network. The Segment 2 scope covering a distance of about 318.66 km of the Trans Nigeria Gas Pipeline and stations was awarded to Brentex CPP Limited for the Engineering, Procurement and Construction of Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline and Stations Project.
As an equal opportunity employer, Brentex CPP Limited welcomes applications for the position below to serve on the Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline Project (Segment 2) Operation:
Job Role
- Work with QAQC to develop and evaluate welding procedures.
- Oversee control production and weld quality.
- Maintain the application of welding codes and standards.
- Manage and mentor junior welders.
- Enforce site and personnel safety polices.
- Review and editing documentation, work reports and record keeping.
Requirements
- Higher National Diploma / B.Tech / B.Eng in Engineering or Physical Sciences.
- National Business and Technical Examinations Board (NABTEB),
- City & Guild Level 3
- AWS certification / CSWIP or equivalent.
- ASNT certification
- 8 years work experience.
Skills:
- Ability to interpret drawings and weld symbols per AWS A2.4
- Knowledge of AWS D1.1, D1.6, D1.2 and ASME B313 fabrications and welding requirements
- Proven work experience in similar job.
go to method of application »
The Nigerian National Petroleum Corporation (NNPC) is currently embarking on the construction of 40” X 614km Ajaokuta-Kaduna-Kano Gas Pipeline and Stations (AKK). The AKK Pipeline is a section of the Trans-Nigerian Gas Pipeline Network. The Segment 2 scope covering a distance of about 318.66 km of the Trans Nigeria Gas Pipeline and stations was awarded to Brentex CPP Limited for the Engineering, Procurement and Construction of Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline and Stations Project.
As an equal opportunity employer, Brentex CPP Limited welcomes applications for the position below to serve on the Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline Project (Segment 2) Operation:
Job Description
- Read blueprints and drawings and taking measurements to plan layout and procedures.
- Determine the appropriate welding equipment or method based on requirements.
- Set tip components for welding according to specifications.
- Welds metal parts together using both gas [Welder GasI or brazing [Brazer, Assembler] any combination of arc processes [Welder Ard.
- Perform related tasks, like thermal cutting grinding.
- May locate and repair cracks in industrial enne cylinder heads using inspection equipment gas torch, and be desnated Repairer, Cylinder Heads.
- Operate angle grinders to prepare the parts that must be welded
- Weld components using manual or sen-automatic welding equipment in various positions (vertical, horizontal, or overhead).
- Repair machinery arid other components by welding pieces and filling gaps
- Test and inspect welded surfaces and structure to discover flaws.
- Maintain equipment in a condition that does not compromise safety.
- SMAW-flat, vertical,horizontal,and over head positions.
- FCAW gas-shielded aol self-shielded wire - flat, vertical, honzontal, and overhead positions.
- Oxy / acetyleneorory / polypropylene work.
Required Certification & Course of Study
- Higher National Diploma / B.Tech / B.Eng. in Engineering or Physical Sciences.
- National Business and Technical Examinations Board (NABTEB)
- City & Guild Level 3.
- ASNI certification
- AW Scertiftcationl CSWlP or its equivant
- Years of Experience: 8 years
Skills:
- Ability to interpret drawings and weld symbols per AWS A2.4.
- Knowledge of AWS 01.1, D1.6, 012 and ASME B313 fabrications and welding requirements.
- Proven work experience in simdar job.
go to method of application »
The Nigerian National Petroleum Corporation (NNPC) is currently embarking on the construction of 40” X 614km Ajaokuta-Kaduna-Kano Gas Pipeline and Stations (AKK). The AKK Pipeline is a section of the Trans-Nigerian Gas Pipeline Network. The Segment 2 scope covering a distance of about 318.66 km of the Trans Nigeria Gas Pipeline and stations was awarded to Brentex CPP Limited for the Engineering, Procurement and Construction of Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline and Stations Project.
As an equal opportunity employer, Brentex CPP Limited welcomes applications for the position below to serve on the Ajaokuta-Kaduna-Kano (AKK) Gas Pipeline Project (Segment 2) Operation:
Role Description
- Carry out full maintenance of trucks, cranes, bulldozers and other heavy equipment for proper performance
- Diagnosing faults using computerized testing equipment
- Perform major repair work when necessary.
Required Certification & Course of Study
- Higher National Diploma / B.Tech / B.Eng. in Engineering or Physical Sciences
- National Business and Technical Examinations Board (NABTEB)
- City & Guild Level 3
- Years of experience: 8 years.
Skills:
- Operational knowledge of Semi-Automatic Welding Equipment, Heavy Duty Crane, and Rig Mechanism (HDD)
- Proven work experience in similar job
- Extensive knowledge of diesel engines and construction equipment
- Ability to work after-hours required
- Good communication skills.
go to method of application »
Job Description
- Vast knowledge in the use of semi-automatic welding systems.
- Map out annual training plans for management, HR. customer support arid more
- Design and develop training programs (outsourced and/or in-house)
- Select appropriate training methods or activities (e4, simulations, mentoring, on-the-job training, professional development dasses)
- Conduct organization-wide training needs assessment and identify skills or knowledge gaps that need to be addressed.
- Design, prepare and order educational aids and materials.
- Assess instructional effectiveness and determine the impact of training on employee skills and KPIS.
- Partner with internal stakeholders and liaise with experts regarding instructional desire.
- Host train-the-trainer sessions for internal subject matter experts
- Manage and maintain in-house training facilities and equipment.
- Conducting Research and recommending new training methods, like gamification.
Required Certification & Course of Study
- HND / B.Tech / B.Eng. in Mechanical Engineering, Instrumentation & control.
- Relevant Certificates required.
- Years of Experience: 6 years
Skills:
- Previous working experience as a training Coordinator
- Ability to communicate effectively with stakeholders.
- Proficient use of Microsoft Suite.
- Ability to effectively organize and manage multiple training initiatives simultaneously.
- Experience in providing full-scope training materials from analyzing company needs to lesson planning, development and implementation with respect to semi-automatic welding.
- Extensive knowledge of best practices in creating instructional materials.
go to method of application »
Job Description
- Vast in installation and maintenance of instrumentation and Telecom systems.
Requirements
- Higher National Diploma / B.Sc / B.Tech in Instrumentation Engineering or Electrical / Electronics Engineering
- City & Guild Level 3.
- 8 years work experience.
Skills:
Working knowledge of Instrumentation & Control deliverables such as:
- Panel (JB and Marshalling) Design
- P & ID's
- Loop Drawings
- Wiring Drawings
- Motor control Schematics
- Instrument location Drawings
- Instrument installation Details
- Instrument Specifications (Datasheets)
- Bill of Materials
- Conduit / Tray / Cable Schedules
- Control Narratives
- Cause and Effect Diagrams
- Construction of Engineering Work Packages.
Working knowledge of Instrumentation Calculation / Selection such as:
- Flow (Orifice Plates, Vortex, Venturi, Magnetic, Ultrasonic meters).
- Level Measurement (Radar, Displacers, Gauges).
- Temperature (including Thermowells Freq. wake calculation).
- Process Analysers and sampling systems would be a plus.
- Competent use of instrument Calculation / Selection specific software.
Working Knowledge (Design/Configuration/Implementation) on any of the following systems:
- PLCs, preferable Modicon, GE or Rockwell
- SISs, preferable Triconex.
- DCS, preferable Honeywell TDC/TPS/Experion, Foxboro/A, ABBxA.
Working knowledge of Industry Standards and Codes related to:
- Instrumentation & Control system deliverables.
- Working Knowledge in Computer-Aided Design software.
- Working Knowledge on Smart Planet Instrumentation (SPI) software.
- Working Knowledge (design/implementation) in Communication, etc
Method of Application
Interested and qualified candidates should send their Applications to: hr.department@brentexcpp.com using the Job Title as the subject of the mail.
Build your CV for free. Download in different templates.
Gmail
Yahoomail