Job Vacancies at Baker Hughes

You will be responsible for technical direction and safe site leadership of onsite installation, operational maintenance, testing, troubleshooting, commissioning & startup activities on Turbo Machinery and Process Equipment and systems in accordance with engineering best practice and contractual work scope requirements.

As a Control Field Specialist in the IET business, you will be responsible for:

• Carrying out Control panel commissioning, logic modifications, loop & functional checks, panel certification and upgrades.
• Providing Technical clarification and supervision to the client on BH rotating equipment (HDGT, Aero GT and Compressors).
• Supervision of all troubleshooting, commissioning, and startup activities of BH products (HDGT, Aero GT and Compressors) as related to Control engineering during outages.
• Direct interfacing with BH Engineering on all matters relating to equipment reliability, operations, maintenance, and failure analysis.
• Providing direction and assistance to work groups to meet assigned objectives.
• Coordinating and overseeing work at the field site, providing quality service to the customer.
• Collaborating with others crew members to the Installation and/or Maintenance activities of Customer Equipment in the Field at Customer Sites.
• Executing all required responsibilities safely and as instructed by direct supervisors and following all IET Service applicable processes and procedures.
• Providing all required records of all activities accomplished at Customer Site to the Baker Hughes IET Supervisor and promotes and maintains good team relations.
• Making recommendations on findings, reviewing effectiveness of maintenance actions to identify future needs.
• Overseeing, overhaul, troubleshooting, commissioning, and start-up of rotating equipment (Baker Hughes portfolio products) at customer sites
• Coordinating the cleanup, repair, and preparation of equipment for the next job.
• Conducting all business activities in accordance with Baker Hughes Core Values (HSE, Quality and Compliance).

Fuel your passion!

To be successful in this role you must:

• Have a bachelor’s degree in electrical engineering, Electronics Engineering, Computer Engineering, or related field is preferred.
• Have a minimum of 8 years’ experience in Turbomachinery Controls system and field instrumentation.
• Be capable to demonstrate strong working experience on at least two of the following GE/BH control systems - MKV, MKVI, MKVIe, Rx3i, GE Fanuc.
• Be capable to demonstrate experience in commissioning & startup of a GE or BH Turbomachinery equipment with Speedtronics MKV, MKVI, MKVIe, RX3i, or GE Fanuc control system.
• Be capable of working independently as a Control specialist and field Instrumentation specialist.
• Have experience working on Turbomachinery equipment – Heavy Duty Gas Turbine, Aeroderivative Gas Turbines, Centrifugal compressors, etc.
• Be willing to travel for work up to 70% of the time.
• Have good Functional / Technical, Customer Focus, Communication, Interpersonal, and Team working skills.

go to method of application »

• Coordinates and oversees work at the field site, providing quality service to the customer. Job role may include job design, execution, and follow up activities.
• Provides the planning necessary for the job including instructions to the crew and equipment used. Coordinates and directs the activities of service operators.

As an Aero Turbine Field Specialist - Turbo Machinery and Process Solutions, you will be responsible for:

• Performing in autonomy some of the Installation and/or Maintenance activities of TPS Aeroderivative gas turbine – LM2500/LM2500+, TM6000, and other Rotating equipment in the Field at Customer Site.
• Performing minor/major maintenance of equipment following the TPS Service Site Quality Check Lists and procedures.
• Providing activities records accomplished at Customer Site to the Baker Hughes TPS Supervisor and promotes and maintains good team relations.
• Providing Technical supervision and advisory service to Working with the Customer Representatives and Site Team to coordinate activities at the Customer Job Site.
• Executing all required responsibilities safely by following all TPS Service applicable processes and procedures.
• Providing expert limited troubleshooting on the equipment under maintenance and/or installation in the Field.
• Conducting all business activities in accordance to Baker Hughes Core Values (HSE, Quality and Compliance).
• Performing other related duties as required according to the specified scope of work.

Fuel your passion

To be successful in this role you will must:

• Have a Bachelor's degree or equivalent in Mechanical Engineering. and solid experience in mechanical service engineering on Turbomachinery.
• Have a valid NYSC discharge or exemption certificate (please indicate clearly on resume)
• Have at least 8 years' experience mainly specialized in LM2500/LM2500+, TM/LM6000, LM9000 rotating equipment.
• Capable of carrying out the following activities without supervision:
  • Level 1 activities on PGT25/LM2500/2500+/LM6000/LM9000
  • Level 2 activities (HSE),
  • Level 3 activities (GG changeout or PT Changeout)
• Be able to perform in autonomy some of the Installation and/or Maintenance activities of TPS Rotating equipment in the Field at Customer Sites.
• Be able to provide the planning necessary for the job including instructions to the crew and equipment used.
• Demonstrate Industry experience and Turbo Machinery and Process Solutions product line training.
• Must have Excellent Functional / Technical, Customer Focus, Communication, Interpersonal, and Team working Skills.
• Capable to work offshore
• Be able to be flexible with working patterns and shift rotations.
• Be able to travel flexibly, at short notice and be away from your home location for undefined periods of time up to 70%.
• Be a good team player and display good communication skills
• Demonstrate excellent analytical skills, with focus on customer.

go to method of application »

As a Field Service Engineer, you will be responsible for coordinating and overseeing work at a field site, providing quality service to the customer. He/She will provide the planning necessary for the job including instructions to the crew and equipment used.

As a Field Services Engineer, you will be responsible for:

• Performing in autonomy the Installation and/or Maintenance activities on LT-16 gas Turbined, PGT5, PGT10, MS5001/2, MS6001, MS7001, and other Rotating equipment in the Field at Customer Site.
• Performing minor/major maintenance of equipment following the Baker Hughes Service Site Quality Check Lists and procedures.
• Providing Technical supervision and advisory service to the Customer Representatives and Site Team to coordinate activities at the Customer Job Site.
• Executing all required responsibilities safely by following all Baker Hughes Service applicable processes and procedures.
• Providing expert troubleshooting on the equipment under maintenance and/or installation in the Field.
• Conducting all business activities in accordance to Baker Hughes Core Values (HSE, Quality and Compliance).
• Performing other related duties as required according to the specified scope of work.

Fuel your passion.

To be successful in this role you will:

• Have a bachelor’s degree or equivalent in Engineering.
• Have a valid NYSC discharge or exemption certificate (please indicate clearly on resume)
• Minimum of 8 years’ experience mainly specialized in PGT5, PGT10, MS5001/2, MS6001, MS7001.
• Capable of carrying out the following activities without supervision:
• Installation activities on HDGT FR 5 - 7 and LT-16 GT.
• Minor Inspection on PGT5, PGT10, MS5001/2, MS6001, MS7001
• Hot Gas Path Inspection on PGT5, PGT10, MS5001/2, MS6001, MS7001
• Major Inspection on PGT5, PGT10, MS5001/2, MS6001, MS7001
• Commissioning activities on PGT5, PGT10, MS5001/2, MS6001, MS7001
• Be able to provide the planning necessary for the job including instructions to the crew and equipment used.
• Must have Excellent Functional / Technical, Customer Focus, Communication, Interpersonal, and Team working Skills.
• Capable to work offshore.
• Be able to travel flexibly, at short notice and be away from your home location for undefined periods of time up to 70%.