Jobs Career Advice Signup
X

Send this job to a friend

X

Did you notice an error or suspect this job is scam? Tell us.

  • Posted: Sep 14, 2022
    Deadline: Not specified
    • @gmail.com
    • @yahoo.com
    • @outlook.com
  • Never pay for any CBT, test or assessment as part of any recruitment process. When in doubt, contact us

    Hobark International Limited is the parent company of the Hobark group operating in the oil and gas industry. The company was incorporated in 1998, starting as a staffing agency based in Port Harcourt. Currently we have offices in 4 countries with our head office in Lagos. The group offers the following services. Drilling services are offered through Dril...
    Read more about this company

     

    Production Superintendent

    Job Description

    • Ensure operability and process safety during construction, commissioning and start-up, and Operation.
    • Develop and implement production strategies for specific operating units.
    • Effectively translate production strategies into operational plans and ensure effective execution of operational plans.
    • Provide personnel and leadership to plant facility projects to ensure they are properly incorporated into existing operations and executed in a manner that does not impact current operations.
    • Establish and maintain a culture of an Incident and Injury Free (IIF) workplace.
    • Manage performance of specific production units.
    • Ensure effective utilization of all production services/support structures in Nigeria.

    Requirements

    • Bachelor's Degree in Chemical Engineering or Equivalent.
    • Minimum of 15 years in refinery, petrochemical plant or gas processing.
    • 10 years’ experience as a supervisor and 5 years in higher supervisory/management position.

    Primary Skills:

    • B.Sc. Chemical Engineering or Equivalent, 10 years’ experience as a supervisor and 5 years in higher supervisory/managemen, "Minimum of 15 years in refinery, petrochemical plant or gas processing"

    go to method of application »

    QAQC Supervisor

    Job Description

    • Perform Pre-Job and Pre-Mobilization Inspections.
    • Ensure the quality of products, consumables and materials comply with requirements of established Procedures.
    • Gather and properly document all data inputs related quality compliance reporting and tracking.

    Requirements

    • Bachelor's Degree / Higher Diploma in Science or Engineering.
    • Possess minimum of 5 years active experience in Oil and Gas QAQC activities for Drilling and Completion, Intervention, Production and facilities.
    • Demonstrate background and thorough knowledge to codes such as ANSI, B 31.3, 31.4 and 31.8, ASME Section V and IX, API 1104.
    • Familiar with NDT methods, visual, magnetic particle, liquid penetrant, radiography, vacuum box testing. ASNT/PCN level II RT, UT, MT, PT, RFI (Radiographic Film Interpretation) certification can be an advantage.
    • Familiar with welding processes, AWS – CWI or CSWIP 3.1 – Level 2 Certified welding inspector certification can be an advantage.
    • Computer literate with competency in Microsoft Office applications - including Word, Excel, and the inclusion of digital photographs for use in recommendations and reporting is required.
    • IWCF certification is not required but can be an advantage.
    • Experience in multiple operational environments -Land and Swamp, Shallow water and offshore is and added advantage.
    • Willing to travel and spend >50% of the time in the field locations.

    Primary Skills:

    • B.Sc/ HND Science or Engineering.

    go to method of application »

    Well Engineering Manager

    Job Description

    • Ensuring appropriate risk management and the creation and delivery of value to the business across all Well Engineering activities by setting top quartile performance, through innovative well designs, implementation of new technologies and continued challenge of existing practices.
    • Ensure sustained improved performance in well duration and cost, to achieve world class performance, through innovative rig designs, implementation of new technologies and continued challenge of existing practices.

    Requirements

    • Minimum Second Class Upper B.Sc. in an Engineering, discipline
    • Minimum of 15 years in E&P environment with substantial experience in drilling, completions and workovers including field based experience as well as proven management experience leading a Well Engineering team to achieve outcomes.
    • An understanding and appreciation of drilling and operations discipline and how they interact with other functions in the organization.
    • Expert in well control and subsurface well pressure monitoring and management.
    • Knowledge of Well Engineering and Petroleum standards and regulations
    • Current well engineering certifications (e.g. IWCF Certification).

    Primary Skills:

    • B.Sc Engineering, Drilling & Completions, Well Engineering

    go to method of application »

    Wellsite Supervisor

    Job Description

    • Commits to Company core values and ensure full compliance to QHSE polices, standards, procedures, and job specific requirements by leading and driving the culture of Zero Incident, Zero Accident, and Zero spill initiative for field operations.
    • Conduct and supervise field operations working with field supervisors and engineers to ensure safety and environmental performance are given the highest priority including adherence with all company, contractors, technical partners, regulatory and industry standards
    • Ensure that all necessary field pre-jobs, real-time and post jobs documents, and properly utilized and duly signed and filed, whilst monitoring and overseeing the timely production of the quality documentation.

    Requirements

    • Bachelor's Degree / Higher Diploma in Science or Engineering
    • Possess minimum 10 years active experience in Oilfield service field operations for Drilling and Completion, Intervention, Production, and facilities.
    • Computer literate with competency in Microsoft Office applications - including Word, Excel, and the inclusion of digital photographs for use in recommendations and reporting is mandatory
    • IWCF, ISO 9001, ASQ knowledge or certification is an added advantage
    • Willing to travel and spend >50% of the time in the field locations
    • Ability to work under pressure.
    • Possesses excellent communication skills and reporting skills.
    • Excellent Team plater, leadership, communication, and customer service skills.

    Primary Skills:

    • Bachelor’s Degree / Higher Diploma in Science or Engineering.

    go to method of application »

    SME - Geomechanics (Hil_Dc/017)

    Description

    • Determine and deliver the ongoing Reserves Review and Field Development Plan with the aim of maximising the asset value according to Midwestern corporate strategic objectives. Working in conjunction with the asset production and engineering team.
    • Ensure well construction design and implementation are carried out with the drilling unit to establish optimum placement of appraisal and development wells to minimise drilling risks/ hazards, maximise production, optimise recovery, minimise costs, and document proposals in Applications to Drill.
    • Review analysed data (logs, cores, pressures & PVT) from drilled wells & production data from producing wells and update static & dynamic models to optimise field development, production and reservoir management.
    • Organize all existing and new Petroleum Engineering data for easy access, retrieval analysis, validation and updates to meet standard practice and corporate requirements.
    • Review and endorse exploration, appraisal and field development plans, including yearly technical work programmes, production forecasts and budgets according to the field development plan.

    Primary Skills

    • Good knowledge of marketing techniques,
    • Knowledge of the Oil and Gas Process, B.Sc Engineering, "B.Sc Engineering, Geology, Geophysics", Knowledge of Geomechanics, Ms Office Packages

    go to method of application »

    Performance and Planning Engineer (Hil_Dc/009)

    Requirements

    • A Degree qualification in Engineering discipline.
    • Management / supervisory skill set.
    • Excellent technical and communication skills.
    • Minimum of 13 years industry experience in oil and gas Company.
    • Highly experienced in Performance & Planning Management within the Oil & Gas industry as well as EPC industry
    • Good knowledge of well survey database management.
    • Ability to communicate in a corporate environment and across geographical areas.
    • Ability to coordinate and manage projects across multi-disciplinary and multi-cultural teams during a project phase.

    Primary Skills:

    • Bachelor's Degree in Engineering, Supply Chain Management, or Business", B.Engr, Engineering Degree, Excellent communication and written skills, Good Leadership Skills, Good Management Skills, Planning Engineer, Planning/Cordinating.

    go to method of application »

    Day Senior Drilling Supervisor (Hil_Dc/015)

    Description

    • Assumes initial control of any emergency onsite and follows the procedures outlined in the Emergency Response Plan;
    • Ensures that the rig contractor and service company personnel perform safely and efficiently and in accordance with their contractual obligations;
    • Witnesses and documents all required safety drills, testing and in-house inspections of equipment, and ensures conformity to required standard of performance and frequency. Requests mobilization of materials, equipment, and services in a timely manner and initiates the removal of redundant materials and the immediate return of rental equipment when it is no longer required;
    • Ensures that the Drilling Superintendent is fully briefed on all drilling operational matters;
    • Ensures that reports are prepared and submitted in accordance with the reporting procedures;
    • Maintains a well file on the current well and submits it to the Completions & Drilling Engineer at the completion of each well;

    Primary Skills

    • Knowledge of the Oil and Gas Process, B.Sc Engineering, Drilling & Completions, Drilling Supervisor.

    go to method of application »

    Associate Cost Engineer (Hil_Dc/012)

    Description

    • Develop and maintain a cost control reporting system to detail actual and forecast costs on the projects/ improvement initiatives based on the inputs from team members. Communicate cost progress, highlight concerns and issues to team.

    Minimum Qualification / Experience

    • Relevant Degree and/or Certification as a Cost Estimator.
    • 8 years experience in a lead cost estimating role both the front-end and definition or execution phases of an opportunity or project / have been responsible for the establishment, maintenance, and delivery of the cost estimating activity for a project
    • Excellent analytical, oral, and written communication skills.
    • Fully versed with Cost Estimating Tools.

    Primary Skills:

    • Good knowledge of marketing techniques,
    • Knowledge of the Oil and Gas Process, Accounting Operations, B.Sc Business/Commercial Field, B.Sc Engineering / Social Science, Contracts, Cost Engineering, Cost performance engineer.

    go to method of application »

    Trainer / Coach/Well Peformance and Improvement (Hil_Dc/014)

    Requirements

    • Candidates should possess a relevant qualification.

    go to method of application »

    Operational Planning Manager

    Job Description

    • Manage the operational team of engineers, technicians, and contractors in achieving the companies’ objectives.
    • Ensure compliance and conformance to regulations and industry standards and procedures.
    • Provide key contribution to achieving Zero station Down-time through proactive risk management and contingencies planning.

    Requirements

    • Bachelor's Degree in Engineering. An MBA or M.Sc. in Petroleum Engineering, Chemical Engineering or Petroleum Engineering is an advantage.
    • 10-15 years of OFSE / upstream oil industry experience.
    • Commercial/technical experience with Oil & Gas service/supply Company and its contracting terms and condition will be an advantage.
    • An understanding of all industry legislative and regulatory requirements, including project proposals, submissions, reports, approvals, cost recovery components, and auditing.

    Primary Skills:

    • B.Sc Engineering, MBA/M.Sc Petroleum Engineering, Chemical Engineering.

    go to method of application »

    Drill Site Manager

    Description

    • Direct day to day operations on drilling, completion, workover and intervention operations.
    • Manage rig contractor personnel and equipment to and from location.
    • Provide accurate daily reports to superintendent.
    • Maintain accurate cost control.

    Requirements

    • Bachelor's Degree in Engineering or equivalent with minimum 15 years’ experience in the oil and gas industry or Higher National Diploma (HND) with related training and 15 years’ experience in the oil and gas industry.

    go to method of application »

    Drilling Superintendent

    Description

    • Supervise all well operations - ensuring safe, reliable and efficient operations.
    • Responsible for drilling rig intake and acceptance testing prior to start of well operations.
    • Manage and oversee interface between drilling technical service providers and rig contractor.
    • Review well engineering programs and ensure rig suitability for the safe and efficient delivery of all well objectives.
    • Ensure statutory approvals for all well programs are in place prior to commencement of well operations.

    Requirements

    • Bachelor of Science in Engineering or a Science discipline.
    • IWCF Certification.
    • 20+ years of relevant work experience in Well Engineering and Construction with an Operator.
    • Operational experience in West Africa would be beneficial.
    • Demonstrate commitment to Health, Safety and Environmental performance, his/her behavior is influential to others in the organization.
    • Strong safety and operational leadership skills.

    go to method of application »

    Cost and Planning Engineer (Hil_Dc/024)

    Requirements

    • Relevant Degree and/or Certification as a Cost Estimator.
    • 8 years experience in a lead cost estimating role both the front-end and definition or execution phases of an opportunity or project / have been responsible for the establishment, maintenance, and delivery of the cost estimating activity for a project
    • Excellent analytical, oral, and written communication skills.
    • Fully versed with Cost Estimating Tools.

    Primary Skills:

    • Knowledge of the Oil and Gas Process, "B.Sc Engineering, Business Administration / Social Sciences", B.Sc Finance / Accounting, CIPM/CIPD, CISA/CIA/FCA/ACCA/ACA/CFE/AERMP/RIMAN, Contracts Analyst, Cost Estimator.

    go to method of application »

    Waste Management Supervisor

    Job Description

    • Schedule and Supervise activities involved in one or more designated activities such as refuse collection, recyclables collection, brush collection or related activity.
    • Coordinates activities with other sections or divisions as needed.
    • Participate in the development of routes and route assignments.
    • Investigate and resolve complaints from the public.
    • Maintains records and prepares basic reports.

    Requirements

    • Diploma or equivalent in related discipline.
    • 6 years of experience related to waste management activities, including 3 years in a lead or supervisory capacity.
    • Knowledge of supervisory principles and practices.
    • Ability to supervise and train others.
    • Ability to communicate effectively, both orally and in writing.
    • Ability to analyze problems and implement recommended solutions.

    Primary Skills:

    • Diploma or equivalent in related discipline, "6 years of experience related to waste management activities, including 3 years ", Knowledge of supervisory principles and practices.

    go to method of application »

    Drilling Engineer

    Description

    • Plan/Design drilling programs in accordance with industry recognized technical criteria and applicable drilling regulations, to achieve exploration objectives in a safe and cost effective manner.
    • Prepare budget and monitor costs.
    • Ensure procedures are technically valid and applicable to the specific well conditions.
    • Monitor and evaluate well conditions in conjunction with the Field Engineers.
    • Initiate other management systems or procedures as required during the program.
    • Communicate with Service Contractors about technical issues and any changes in the drilling program.
    • Provide offshore drilling engineering support.
    • Provide support to clients and field engineers during drilling activities.

    Requirements

    • Minimum of HND / B.Sc in Engineering, Science, Geology or other technical discipline.
    • Minimum of 5 years Oil & Gas Drilling experience with an operating company.
    • Industry training in drilling technology and HSE.
    • Demonstrate communication skills, technical maturity and flexibility to adjust to change.
    • Good data management and computer literacy.
    • Requires ability to read and interpret information well logs and interpret directional survey information and other well-site data.

    go to method of application »

    Fluids Officer Advisor

    Description

    • Establishes a drilling and completions fluids program along with lessons learned and best practices.
    • Establish and maintain fluid metrics (mud, cement & completion fluid) for all the rigs and all relevant categories, maintain inventory, process invoices and develop well recaps.
    • Monitor Warehouse products to maintain sufficient levels, attend all meetings including mooring rig call ins, HSE, risk assessment, root cause analysis, vendors, drilling superintendents, presentations etc.

    Requirements

    • Bachelor of Engineering Degree or equivalent with minimum of 7 years’ experience in the oil and gas industry, OR
    • Higher National Diploma (HND) with related training and 7 years’ experience in the oil and gas industry.

    go to method of application »

    Geologist

    Description

    • Incorporate log, core, petrophysical, seismic, production and other data to evaluate well results, assist in planning new well locations.
    • Provide geological expertise on a multi-discipline asset team testing new ideas as well as supporting emerging development projects to meet team and corporate goals.
    • Strong prospecting skills with the ability to integrate subsurface (well) information into interpretations with use of cross-sections, maps, seismic displays, visualization techniques, fault mapping, etc.
    • Responsible for regional exploration mapping, approval of proposed well locations providing geological support to development decisions, recommending operations to optimize production, increasing recovery and adding reserves.
    • Build a regional structural and stratigraphic framework and develop a working understanding of the regional petroleum system Presentation of assessments to team and management.

    Requirements

    • Bachelor’s Degree in Geology or equivalent with minimum of 10 years’ experience in the oil and gas industry.
    • Broad knowledge of geology, geophysics, and entrepreneurial thinking to generate onshore/offshore opportunities.
    • Proficient in 2D and 3D workstation interpretation (Landmark), with emphasis on fault identification.

    go to method of application »

    Project Schedule Controller (Hil_Epc/016)

    Description

    • Take part in quality checks of completed bids in consonance to the bid requirement/check lists and ensure bid compliance to draft condition of contract in the ITT.
    • Participate in site visits/pre-bid meetings if required; identify all risks related to the project for Tendering during site visits and advise the Head Tendering.
    • Take part in the overall bid packaging exercises to ensure that bids are submitted in due date and on time

    Requirements

    • B.Sc in Engineering, Business Administration/ Social Sciences.
    • B.Sc in any related discipline.
    • 6+ experiences in Projects or field Engineering (Construction) pipeline & facilities.
    • Project/Contract Management, Cost Estimator.

    Primary Skills:

    • Knowledge of the Oil and Gas Process.
    • Good communication and presentation skill.
    • Good analytical skill.
    • Ability to carry-out project selection.
    • Excellent interpersonal, written and communication skill.
    • Good communication and document management.
    • Proficiency in all Microsoft programmes.

    go to method of application »

    Project Cost Controller (Hil_Epc/018)

    Description

    • Take part in quality checks of completed bids in consonance to the bid requirement/check lists and ensure bid compliance to draft condition of contract in the ITT.
    • Participate in site visits/pre-bid meetings if required; identify all risks related to the project for Tendering during site visits and advise the Head Tendering.
    • Take part in the overall bid packaging exercises to ensure that bids are submitted in due date and on time.

    Requirements

    • B.Sc in Engineering, Business Administration / Social Sciences.
    • B.Sc in any related discipline.
    • 7+ experiences in Projects or field Engineering (Construction) pipeline & facilities
    • Project/Contract Management, Cost Estimator.

    Primary Skills:

    • Knowledge of the Oil and Gas Process.
    • Good communication and presentation skill.
    • Good analytical skill.
    • Ability to carry-out project selection.
    • Excellent interpersonal, written and communication skill.
    • Good communication and document management.
    • Proficiency in all Microsoft programmes.

    go to method of application »

    Fluids Field Consultant

    Description

    • Responsible for Quality Assurance and Control on drilling and completion fluids for the rigs, mud plant and support bases, cement at the rig, and in town, solids control equipment, waste management and lab equipment, and on transfer tickets, delivery tickets and relevant paperwork.
    • Ensure solids control equipment is functioning properly.

    Requirements

    • Bachelor of Engineering Degree or equivalent with minimum 10 years’ experience in the oil and gas industry or Higher National Diploma (HND) with related training and 10 years’ experience in the oil and gas industry.

    go to method of application »

    Maintenance Superintendent - Mechanical (Hil_Ops/006)

    Responsibilities

    • To execute maintenance activities to enable production of specification crude in line with the company forecasts and reporting to the Maintenance Supervisor.
    • To execute maintenance operations on various production equipment. Report findings in a clear manner.
    • Bring any deviations from the more normal situation to the supervisor’s attention.
    • Ensure that the execution of maintenance activities is in line with maintenance procedures.
    • Where procedures are difficult to follow suggest modifications to improve the operation.
    • Participate in, and comply with recommendations/safety measures from risk assessment and HAZOP/HAZID as it applies to daily works.

    Requirements

    • A qualification in an Engineering discipline is essential with at least 5 years work experience.
    • Ideally some previous experience in Production and Maintenance operations.
    • Good written/spoken English and Computer literate.

    Primary Skills:

    • Engineering, Maintenance, Mechanical Engineer, Oil & Gas, EPC,QHSE.

    go to method of application »

    Slickline Operations Supervisor (Short Term)

    Description

    • Slickline Supervisors needed for intervention challenges to join a well intervention team to analyze the challenges and direct / supervise the slickline activities in the field.
    • This intervention work is being planned for three identified wells currently and is estimated for a duration of one month in the first instance.

    Primary Skills

    • B.Sc Engineering, Slickline Operator, Slickline Supervisor, Well Planning.

    go to method of application »

    Facilities Manager (Hil_Epc/010)

    Description

    • To coordinate and manage the Engineering services related to Facilities Modification and Improvement on Oil & Gas Facilities, in line with company business objectives.
    • The objective is to carry out all projects safely, on time and within budget.

    Requirements

    • B.Sc / M.Sc in Facilities Engineer, Facilities Management.
    • Bachelor's Degree in Engineering, Supply Chain Management, or Business.
    • Knowledge of the Oil and Gas Process.
    • Swamp Engineering/Construction/Operations experience would be an advantage

    go to method of application »

    Senior Contracts Engineer - Drilling & Completion

    Job Description

    • Prepare and maintain an up-to-date list of qualified contractors/suppliers/potential tenders/contracts with updated information in order to perform market studies, analyze and assess all possible answers from the market.
    • Participate to the validation of the contracts strategy through: Arranging and attending Contracts Committee Meetings, Pre-qualifying bidders, Defining target prices, Defining criteria for evaluation  
    • Participate in Recommendation to award (RTA) through contract committee/DOA and award validation where he/she evaluates RTAs.
    • Monitor contractor’s performance with Duet, promoting and attending service quality meetings, claims, amendments and contract renewal discussions with contractor and manage and maintain a network with Stakeholders such as NAPIMS, NCD, Department of Petroleum Resources, etc.

    Requirements

    • A Degree in Engineering, Management or Social Sciences.
    • A background in drilling and Membership of relevant professional bodies in the Supply Chain and in Operational functions will be an added advantage.
    • 12 years’ experience in oil well construction activities of which 5 should be in contract administration.  
    • Demonstrable general knowledge and understanding of commercial, legal and insurance issues affecting the company in general.
    • Good command of English language and excellent communication skills.

    Primary Skills:

    • BSc, Completions Engineer, Drilling Engineer, Drilling Operations, Engineering, EPC

    go to method of application »

    QA/QC Manager (Hil_Epc/005)

    Job Description

    • Promote safety culture and Company HSE rules within Company and contractors personnel,
    • Ensure contractors and other personnel comply with Company HSE rules,
    • Participate in and conduct Contractor Yards HSE Tours when required,
    • Responsible for the implementation of system quality management and ensure it is established when required in accordance to ISO 9001:2015.
    • Review projects QA/QC documentation including Inspection Test Plan, calibration certificates, test results, inspection requests, welding procedures and other site documentations using PRODOM
    • Ensure accountability of ECP construction quality interfacing with multidisciplinary processes and produce all project deliverables as stated in project operational documents.
    • Responsible for monitoring prefabrication / installation work processes and analyze all processes to ensure compliance to general Company specifications / rules.
    • Interface with discipline inspection engineers or supervisors and ensure proper understanding of quality standards & procedures, monitor compliance and report non-conformance.
    • Responsible for managing work methods with applicable specifications or standards and ensure non-conformances were identified and documented.
    • Ensure proper collaboration and alignment with construction contractors or supplier in other to always maintain system quality policy and objectives.
    • Define QA/QC requirements where necessary and ensure they are included in tenders and service contracts.
    • Interface with ECP onshore & offshore, C&P team for technical clarifications and ensure quality requirements are met.
    • Carry out regular surveillance inspection for all activities on site and that of contractors / sub-contractors.
    • Track quality performances in all activities in ECP and ensure work is performed meeting Company quality objective.
    • Assist in the accreditation of contractor’s NDT subcontractors and ensure compliance with Company rules and specification.
    • Ensure establishment and proper implementation of controls within project management team in accordance to Generic Quality Plan.
    • Ensure correct implementation of approved Inspection Test Plan by Construction team and Contractors.
    • Ensure proper inspection program is established at all time to meet quality requirements for the storage of project materials and consumables and manage material traceability
    • Provide specialist skills / services to ECP QA/QC team especially for fabrication & painting activities and ensure adequate resources are available for ECP construction programs.
    • Ensure inspected materials on arrival is within conformity and issue reports for all project materials in coordination with materials inspector.
    • Ensure all non-destructive and destructive testing carried out conforms to specification and that code requirements were complied.
    • Have the ability to plan and carry out independent quality audit on contractors when needed and issue a reliable report in line with applicable standards.
    • Take part in project kick off meetings and other project related meetings as may be required and prepare reports when required.
    • Prepare and issue weekly and monthly report covering all quality inspection works.Collate technical queries, Derogations, NCR, and other task that may be assigned by QA/QC Leader.

    Requirements

    • Education: Mechanical Engineering or equivalent with a minimum of 7 years experience in Oil & Gas EPCI projects Quality Control management positions,
    • Certifications: AWS-CWI or CSWIP3.1, ISO 9712 or ASNT II, NACE II or equivalent, ISO 9001:2015, and IRATA 2.
    • Proven technical skills with ability to work with team of Quality inspectors and supervisors (civil, welding, painting, E&I, NDT, etc.),
    • Good interpersonal and communication skills with ability to adapt and represent COMPANY in discussions with contractors,
    • Software capabilities: MS Office packages – good experience in the use of Excel, Project, and any specialized software.
    • Candidate applying for this position shall Not be more than 40years of age from the date of application.
    • SAS HUET (or BOSIET), CA-EBS, and other mandatory operational HSE requirements.
    • Primary Skills: Interpersonal.

    go to method of application »

    Night Drilling Supervisor

    Job Description

    • Supervise the all drilling/workover/testing/completion operation and ensure they are in accordance with the program.
    • Supervise the service contractors/sub-contractors working for the company.
    • Plan ahead to determine future requirements for drilling equipment and consumables.
    • Discuss program changes with the Day Drilling Supervisor.
    • Liaise with other departments (e.g., production) to discuss and schedule concurrent operations.

    Requirements

    • High School Education (minimum).
    • Possession of a degree is an advantage.
    • Attended industry courses in well engineering, well operations management, project management.
    • Experience 15 years Age 35 years (minimum).
    • Good technical knowledge of wellsite supervision.
    • Initiative to proffer solutions to technical problems.
    • Sound knowledge of IADC/API guidelines for well operations.
    • Able to supervise subordinates and lead team to achieve results.
    • Good interpersonal skills, communications and organizational skills are essential.

    Primary Skills:

    • Good technical knowledge of wellsite supervision.

    go to method of application »

    Maintenance Superintendent - Electrical (Hil_Ops/004)

    Duties & Responsibilities

    •  Plan daily maintenance activities to ensure vehicles and equipment availability for company operations.
    • Ensure daily tool box meetings are conducted before commencement of maintenance operations each day.
    • Maintain up to date status of repairs, overhaul, and modification of company vehicles and equipment
    •  Exercise judgment in and independence in handling routine maintenance issues.
    •  Maintain log of work orders on activities of his team
    • Collate required data on the activities of the team which includes but not limited to availability and reliability of equipment under them, issue all applicable reports and utilize the reports to effect improvements on equipment availability
    • Improve the mean time to repair by proactively ensuring the required spares are available for their team.
    • Ensure quality of work meets the required standard and improve on the mean time between failures of repaired equipment.
    • Determines work methods, sequences, tools, and equipment to use in carrying out maintenance of vehicles and equipment.
    • Select and comply with technical manuals, illustrations, specifications, diagrams, schematics, and similar guides to make repairs and modifications according to specifications and procedures.
    • Determine cause of malfunction and advice maintenance crew of required repair to correct fault.   
    •  Authorize the release of serviced and repaired vehicles/equipment
    • Provide support to maintenance teams at various project locations.
    • Carry out any other assignments as may be instructed by the Maintenance Manager.

    Qualifications

    • Associate Degree.
    • 12 years experience in the maintenance of both heavy duty and light duty Equipments .

    Primary Skills:

    • Engineering, EPC, Oil & Gas, Operations, Production.

    go to method of application »

    SCM Well Engineering Support Personnel (Hil_Dc/018)

    Requirements

    • Minimum of 15 years in E&P environment with substantial experience in drilling, completionsand workovers including field based experience as well as proven management experienceleading a Well Engineering team to achieve outcomes.
    • An understanding and appreciation of drilling and operations discipline and how they interact with other functions in the organization.
    • Expert in well control and subsurface well pressure monitoring and management.
    • Must understand, adhere to and be a promoter of business ethics, with strong economics, risk assessment and strategy development skills.
    • Proven experience with safety management systems including emergency response management, providing technical advice and troubleshooting
    • Experience managing contractors in line with a contract for service
    • Knowledge of Well Engineering and Petroleum standards and regulations.

    Primary Skills:

    • Good knowledge of marketing techniques
    • Knowledge of the Oil and Gas Process, B.Sc Engineering, B.Sc/B.Engr, Well Design, Well Performance, WELL PLANNING, Well Services Background.

    go to method of application »

    Maintenance Superintendent - Instrumentation (Hil_Ops/005)

    Job Description

    • Prepares instrument & control philosophy, design & supply specifications, I/O
      and Instrument lists, cables schedule, block diagrams, instrument wiring
      diagram, loop diagrams, data sheets, MTOs for flow lines hook up &
      production facilities (modifications and new developments)
    • Carries out preliminary, basic and detailed facilities engineering studies / design
      in-house. 
    • Ensures that the facilities Engineering Contractors submit all deliverables on time and checks them regularly to achieve Company quality expectations
    • Sizes control valves and shut down valves. 
    • Prepares requisitions for Instrumentation materials procurement and technical bids evaluation.
    • Reads and interprets engineering drawings, specs and make necessary modifications or recommendations.
    • Interfaces with Procurement Department., Project & Construction Sections for
      engineering related issues.
    • Draw up and cross-check relevant procedures, international standards and
      General Specifications.
    • Prepares CFT for Instrumentation engineering activities and relevant technical evaluation.  
    • Follows-up Purchase Orders to ensure timely approval, conformity of design &
      participates in reviews and FAT with Vendors.
    • Checks and approves Instrumentation engineering deliverables received from Contractors or Third Parties and makes sure that comments are incorporated in revised documentation.
    • Checks that the design is developed in line with the Pre-Project and the Statement of Requirements.
    • Coordinates with JV FOPs for integration of new instrumentation in existing facilities.
    • Follow-up on Engineering and Construction activities

    Job Requirements

    • B.Sc. / B.Eng in (Electrical / Electronics Engineering) or its equivalent with a minimum of 5 - 10  years experience in an Engineering Organization in a similar design position. 
    • Use of INtools, S4I, MS word, MS excel is required .Working knowledge of ISA Codes, IEC Standards and most common international standards. Knowledge of AutoCAD, PDMS, AVEVA E&I and Electrical Design Engineering is an added advantage.
    • Good knowledge of the English Language.
    • Good interpersonal and communication skills.

    Primary Skills:

    • Engineering drawings & design, Instrumentation

    go to method of application »

    Security Intelligence / Surveillance Officer (Hil_Hse/007)

    Job Description

    • Develop and implement strategies for acquiring and managing proactive security information, which will be distilled into actionable intelligence for the successful and positive deployment to Company’s operational areas.
    • Provide and share intelligence reports with relevant internal and external stakeholders to ensure that assets, personnel and operations are protected from crime, violence and other business-related risks within the Western asset.
    • Provide the Security Manager support with regular intelligence and management reports to guide decisions on security issues

    Requirements

    • A good Bachelor’s Degree.
    • A sound knowledge of Security Management in an industrial setting.
    • Minimum of 10 years security experience, at least 5 of which must have been in a senior position in an oil and gas company.
    • A good military or security background will be an advantage.

    go to method of application »

    Lead, Health / Environment (Hil_Hse/006)

    Job Description

    • To monitor the implementation of the approved
    • Contractor and sub-contractor project HSE plan and referenced procedures including bridging documents
    • Participate in Risk Assessment and SERVICE Safety
    • Analysis studies dedicated to construction operations in hands and ensure they comply with related General Specifications and Guide manuals.
    • Monitoring and reporting the Health, Safety and
    • Environmental performance of the Contractor and its sub-contractors on site.
    • Undertake site HSE audits & inspections, and ensure corrective action recommendations are conclusively closed-out.
    • Ensure Hazard identification/reporting, accident reporting and investigation are continuously undertaken
    • Participate in the site emergency preparedness and follow-up the improvement measures undertaken after the regular exercise.
    • Take part in the preparation and attend the meetings of the site HSE committees
    • To focus on the early identification of potential problems and to propose appropriate solutions to HSE Superintendent.
    • To attend regular meetings with contractors’ HSE representatives to discuss and agree on HSE concerns and potential hazards.
    • To be proactive in promoting HSE awareness at
    • all levels within the project team and contractor personnel.

    Qualifications

    • Bachelor's Degree (BSc) or equivalent in any Engineering or Physical Science and formal training in HSE with recognized qualification or Certification.
    • Minimum of 5 years working experience in the Oil and Gas production projects, with minimum of 3 years on position(s) of similar HSE responsibilities.
    • Knowledge of risk assessment techniques and experience at organising HAZOPS, HAZIDS, HAZAN and other reviews.
    • Administrative skills including proficiency in typical office applications (Words, Excel, PowerPoint, etc).
    • Fluent in English language and ability to communicate well at all levels within the Company. In addition, the candidate must possess very good planning, presentation, negotiations and organizational skills.
    • Ability to work on rotation bases.

    go to method of application »

    Operational Planning Manager

    Job Description

    • Manage the operational team of engineers, technicians, and contractors in achieving the companies’ objectives.
    • Ensure compliance and conformance to regulations and industry standards and procedures.
    • Provide key contribution to achieving Zero station Down-time through proactive risk management and contingencies planning.

    Requirements

    • Bachelor’s Degree in Engineering.
    • An MBA or M.Sc. in Petroleum Engineering, Chemical Engineering or Petroleum Engineering is an advantage.
    • 10 - 15 years of OFSE / upstream oil industry experience.
    • Commercial/technical experience with Oil & Gas service/supply Company and its contracting terms and condition will be an advantage.
    • An understanding of all industry legislative and regulatory requirements, including project proposals, submissions, reports, approvals, cost recovery components, and auditing.

    go to method of application »

    Finance Well Engineering Support (Hil_Dc/019)

    Requirements

    • A Degree qualification in Engineering discipline.
    • Management / supervisory skill set.
    • Excellent technical and communication skills.
    • A minimum 15 years industry experience with an Operating Company.
    • Highly experienced in the drilling industry, with relevant experience in supervising and managing drilling operations onshore and offshore.

    Primary Skills:

    • Good knowledge of marketing techniques.
    • Knowledge of the Oil and Gas Process, B. Engineering, B.Engr, Financial / commercial management, Well Completion, well cost estimating, Well Design, Well Planning.

    go to method of application »

    Directional Drilling Supervisor (Hil_Dc/023)

    Requirements

    • B.SC or B.Eng degree.
    • B.Sc in Engineering.
    • 15 years minimum local and or international experience in core drilling engineering
    • IWCF Level 4.
    • Wells professional with an engineering degree qualification, IWCF Level 4 certification and at least 15 years’ experience in Drilling, including specific experience in depleted sand/shale sequence well planning and operations, including a proven knowledge of sidetracks, high angle and directional drilling activities and techniques.

    Primary Skills:

    • Good knowledge of marketing techniques.
    • Knowledge of the Oil and Gas Process.
    • Directional Driller, driller.

    go to method of application »

    Drilling Fluid Supervisor (Hil_Dc/016)

    Description

    • Provides as required technical support to supplement experience of Contractors Drilling Fluids Engineers.
    • Works with the Mud Contractor and drilling Fluids Superintendent to deliver enhanced quality service. and to ensure the program meets the objectives of delivering the well without NPT.
    • Proactively ensure well operations fluids meet technical and operational requirements of the drilling and mud programme and are cost effective.
    • Ensure quality and consistency of work and reporting of all drilling fluids related contractors at the rig-site.
    • Monitor drilling and completion activities and provide technical advice as required to keep the mud in the best state to perform its role in the well.
    • Monitor utilization of drilling fluids chemicals to ensure there is no wastage and products are being used in a preventative manner to preclude well problems.
    • Manage drilling fluids chemical cost and ensure all fluid related KPI’s are met.
    • Monitor the mud contract and ensure the mud contractor is providing the full scope of services in the contract.

    Primary Qualifications and Skills

    • Knowledge of the Oil and Gas Process, 10 years’ experience as a supervisor and 5 years in higher supervisory/managemen, B.Engr, B.Sc Engineering, Bachelor's Degree, Field Engineer, Field Operation

    go to method of application »

    Community Relations Manager (Hil_Hse/009)

    Job Description

    • Providing day-to-day engagement with community stakeholders at the instance of the Head of Security & Community Relations.
    • Evaluating company relations host communities and project impacted communities and developing solutions within the framework of the corporate policy on community

    Qualifications

    • Bachelor's Degree in any discipline or other related fields
    • 6+ experience in community relations management
    • Experience in Security Industry
    • Proficiency in Microsoft Office programs (Word, Excel, Outlook, PowerPoint)
    • Excellent organizational, interpersonal, and written & communication skills are required.
    • Ability to maintain strict confidentiality.

    go to method of application »

    Completions Engineer

    Job Description

    • Preparing completion planning and programs in accordance with the development strategy as per COMPANY policies and standards.
    • Establish and maintain close liaison with the subsurface team, project, and operations groups to ensure effective integration of well programs in the overall development plan.
    • Responsible for proper application of cost and schedule controls and analysis of drilling and completion trends to determine efficiency and cost improvements, within project objective/goals.
    • Coordinate CWOPS, AAR of completion and workover operations to identify improvement opportunities for future programs.
    • Assisting in the development of operating plans and annual budgets by ensuring that cost estimates accurately reflect the intended project scope.

    Requirements

    • 10 - 15 years’ relevant experience in Completion and Well intervention planning and operations.
    • University Level Education (minimum Second Class Upper Degree) in Engineering Discipline.
    • Current International Well Control Certificate (IWCF).

    go to method of application »

    Designer (Hil_Epc/030)

    Requirements

    • B.Sc in Engineering /related technical field, Management Sciences, Economics or physics.
    • Minimum of 10 years industry experience.
    • Excellent understanding of the EPC industry
    • Good communication skills.
    • High knowledge of Technical Drawings and their functionality.
    • Good knowledge of oil and gas/EPC regulations and standards.

    Primary Skills:

    • 3D Modelling.
    • Design Engineer.
    • Effective and Results-driven
    • Planning & Organizational Skills & Ability to Multitask.

    go to method of application »

    Security and Community Relations Lead (Hil_Hse/008)

    Requirements

    • Candidates should possess a First Degree or a Higher National Diploma in Engineering, Social Sciences, International Relations, Political Science, or related discipline
    • Minimum of 8 years’ experience in Security Management, 3 years’ leadership experience of security assessment, planning and operational and security practices for high threat environments/ multi-national operations.
    • Demonstrated success in public/community relations to include handling Land acquisition challenges and Community boundary disputes and Inter State boundary disagreement
    • Origin and knowledge of State/Terrain /Culture
    • Experience in liaising with communities, civilians, police and/or military government authorities as well as with regional institutions preferable

    Primary Skills:

    • Public & Media Relations, Oil & Gas Operation", Security Management, Security Personnel 

    go to method of application »

    FLB Camp Boss (Hil_Epc/043)

    Job Description

    • Planning, organizing and controlling camp operations.
    • Ensuring compliance with the applicable work specifications of contracts. Controlling costs and utilization of manpower for optimum performance. Establishing work procedures and policies to achieve organizational objectives.
    • Coordinating closely with client representatives and other contractor personnel to ensure customer satisfaction.
    • Constantly monitoring operations with a view to more efficient management and performance techniques.
    • Manage staff, preparing work schedules and assigning specific duties.
    • Play a key role in budgeting and controlling costs. Specifically food and consumable costs, ensuring accurate POB schedules are prepared and submitted in a timely manner to the relevant departments.
    • Organizes the implementation of instructions including customer service, catering delivery and handling, food safety, HACCAP, quality control and Health and Safety as per company approved SOP
    • Any other duties as directed by P&F Manager

    Qualifications

    • City & Guilds 706-1/2 or Equivalent HACCP Level 3
    • 6-8 years of experience in similar position, preferable within oil and gas camp facilities.
    • International experience, preferably West Africa regions Working with multi-cultural clients and colleagues.

    go to method of application »

    Maintenance Engineer - Mechanical (Hil_Epc/036)

    Requirements

    • OND in any Engineering Discipline or N.T.C or Trade Test Certificate1,2&3 or S.S.C.E
    • B.Sc. in Engineering or related disciplines
    • Minimum of 15 Years’ experience in a major Construction organization with a well set up & managed Maintenance System covering Heavy Duty & Light Duty Construction Equipment, Light Duty Vehicles & Heavy-Duty Trucks.
    • Relevant cognate experience in all kinds of Preventive, Corrective & Predictive maintenance activities on at least one or more of the following Equipment Types:
      • CAT Excavators, CAT Bulldozers, CAT Motor Grader, CAT Wheel Loaders, CAT Pipe layers, CAT Swamp Buggies, VOLVO Pipe layers
      • RT Cranes – Grove & Terex
      • Crawler Cranes – American & Kobelco
      • Mobil Compressors- Sullair, Ingersoll Rand & Atlas Copco
      • Heavy Duty Trucks – Mack Trucks Flat Beds and Low Boys
      • Light Duty Vehicles – Toyota Hilux & Hiace Bus ,PRADO/Land Cruiser
      • Heavy Duty Generator Sets – Perkins, Deutz & Cummins
      • Dump Truck
      • Case or CAT Backhoe Loader
      • Forklift.

    go to method of application »

    Subsea Project Engineer

    Job Responsibilities

    • Responsible for subsea concept review, alternative, subsea concept analysis and subsea concept selection as well as the following in later phases of the project: specification, design, cost estimating, construction, integration, testing, and installation of subsea systems.
    • Responsible for interfaces with subsea riser systems, top side production control systems and flow assurance issues.

    Requirements

    • Bachelor's Degree in Engineering or equivalent with minimum of 10 years experience in the oil and gas industry or Higher National Diploma (HND) with related training and 10 years experience in the oil and gas industry.

    go to method of application »

    Drilling Representative - Deepwater

    Job Description

    • Ensures that all rig activities are conducted in accordance with contract terms and conditions, utilizing proper operating procedures and techniques for safe and environmentally sound operations.
    • Promotes and ensures compliance with corporate ESF&H policies and standards throughout the entire drilling operation, including Drilling Contractors and Service Companies.

    Requirements

    • Bachelor's Degree in Engineering or equivalent with a minimum of 10 years’ experience in the oil and gas industry or Higher National Diploma (HND) with related training and 10 years’ experience in the oil and gas industry.

    go to method of application »

    Metering Engineer (Hil_Epc/035)

    Job Responsibilities

    • Assist Lead instrumentation engineer and Head of section (Head of Instrumentation, Metering & Systems Support) for the updating of the Maintenance Plans including dedicated procedures, spare parts coverage, tools selection and other technical aspects, in accordance with the Maintenance Policy.
    • Is together with Lead Metering Engineer focal point for Client concerning technical and commercial (fiscal) metering systems.
    • Manage the maintenance and reliability of all metering systems and guarantee the integrity of their measurements.
    • Follow-up within all matters concerning metering related contracts (sales, transportation, and/or other agreements) 
    • In connection with Client concerned entities he shall : 
      • Prepare and manage maintenance plan, spare inventory and all other related administrative tools in UNISUP as regards     Instrumentation, control systems and metering maintenance on site.
      • Prepare and update the metering manuals describing the CLIENT technical & fiscal metering equipment as well as related    operating procedures. Ensure the proper saving and storage of data back-up, and documentation.  
      • Ensure that periodical meter proving exercise at our LACT points as well as the prover loop calibrations are carried-out as    provided for by the regulations governing operations of such facilities (DPR regulations).  
      • Ensure that the fiscal gas metering system quarterly validations, Client Supply Point Technical and Commercial Ticketing Audit are  carried out in compliance with the Gas Utilisation Agreement with the Client and the regulations governing operations of such facilities (DPR regulations).
    • Ensure that the Fiscal Metering systems are fully operational, accurate and comply with the regulations defined by the Authorities. 
    • Ensure proper certification of the fiscal metering systems and smooth relations with the DPR with the commercial team. 
    • Liase with the Main Maintenance Contractor teams on the necessary corrective actions as relates to the metering systems. 
    • Specify the new technical and commercial metering systems in co-operation with instrumentation specialists. 
    • Initiate and follow-up the monitoring of performance for the equipment defined within the Field of Competence including Metering Systems, Fire and Gas detection systems, ESD systems, Security control, etc. 
    • Work closely with instrumentation Maintenance Methods during metering interventions and share experience(s) accordingly.
    • Provide and clarify flow equation formulae to be entered/ entered on the ICSS. 
    • Coordinate with the Technical Support and Smart Room teams for the investigations, follow-up and reporting of deficiencies or significant events.
    • Issue FITA (Failure Investigations and Technical Analysis) reports and REX+ Return of experience related to equipment within the Field of Competence. 

    Qualifications

    • B.Sc / B.Eng. Degree in any Engineering related discipline such as Instrument / Control / Electronic / Automation / Petroleum / Chemical.
    • 5 to 10 years working experience in an oil producing, manufacturing or service Company with specialized training/competence im Metering techniques.
    • Large Expertise in Metering systems and International Metering Codes (ISO, API, AGA,etc ...) Good relational, presentation and communication skills.
    • Computer literate, with a knowledge of computerised process systems.
    • Ability to organize a mission campaign in an offshore environment

    Primary Skills:

    • Metering Systems, Maintenance, Metering Techniques

    go to method of application »

    Civil Inspector

    About the Job

    • The candidate shall be responsible for inspecting site conditions prior to the start of construction activities and verify the compatibility of the site with the designed permanent works.
    • Checking for obstructions, photographing and documenting the condition of existing property that might be damaged by the work and ensuring all existing structures, property, utilities and landscaping are properly protected.
    • Reviewing materials delivered to the site for conformance with approved samples, materials and equipment and report findings to the Resident Engineer.

    Requirements

    • Bachelor's Degree in Engineering or equivalent.
    • 9 Years’ of related experience.
    • 5 years working experiences in a major oil field, petrochemical, or oil and gas handling projects.

    go to method of application »

    Senior Project Schedule Controller

    Job Description

    • Work under the direction of a Senior Project Schedule Controller or Lead Project Controls Engineer to assist and advise Project Management in relation to project schedule.
    • Preparation of reports and presentations related to project controls, including status reports.
    • Monitor project schedules for possible problems, particularly in schedule slippage and project critical path impact.

    Requirements

    • Associates Degree or Project Management Institute Training with 5 years of upstream oil and gas design experience, OR.
    • Project Management Institute Certification with 5 years of upstream oil and gas design experience, OR.
    • No degree with 8 years of equivalent technical experience of which 5 years are in upstream oil and gas project controls.
    • Demonstrated proficiency in computer skills, including producing and maintaining resource loaded schedules using commercial packages such as Microsoft Project and all Microsoft Office products.

    go to method of application »

    Pipeline Engineer

    Job Description

    • All HSE matters relating to the development and execution of Pipeline works.
    • Leadership and advance safety auditing at all locations.
    • Provide input to safety cases etc.
    • Ensure policy goals and guidance are embedded and maintained in all Pipeline/Flowline activities.
    • Maintain a solid relationship with Host Communities.

    Requirements

    • Degree in Engineering (minimum of Second Class Upper).
    • Master's degree in Engineering or Business related topics.
    • Minimum of 15 years post qualification experience in Oil and Gas Pipeline.
    • Experience in development execution of projects exceeding $5million.
    • Experience in Oil and Gas field production.
    • Knowledge of Oil Field contracts and contracting strategies.

    go to method of application »

    Senior Process Engineer

    Job Description

    • Carry out process engineering studies and provide assistance to any process activity needed to support operations at site.
    • Follow up on implementation of Site Modification Request (SMRs) from initiation to completion.
    • Participate in Safety reviews (HAZID, HAZOP, Project reviews) when required.

    Requirements

    • Qualification: B. Eng. in Chemical Engineering, Petroleum Engineering (or equivalent).
    • Professional Experience (number of years): 8+ years in Process Engineering Studies.
    • Specialist applications: PROII, HYSIS and International standards.

    Primary Skills:

    • "B.Eng. Chemical Engineering, Petroleum Engineering or equivalent", Process Engineering Studies, "PROII, HYSIS and International standards"

    go to method of application »

    Senior Design Engineer

    Job Description

    • Supervises checks and performs the overall design and engineering of onshore and offshore oil and gas production facilities and the supporting infrastructure.
    • Coordination of inter disciplinary checks, design reviews and HAZOPS or similar.
    • Completion of conceptual scopes of work and preliminary designs.
    • Review and update of project and general specifications, engineering procedures and engineering policy.
    • Prepares the documentation for all projects and ensures that it is properly archived.

    Requirements

    • Bachelor's Degree in Engineering.
    • Registered Professional Engineer.
    • 8 years of experience in discipline, including 5 Years’ experience in engineering design of oil facilities, petrochemical, or oil and gas handling projects.
    • Thorough knowledge of oil field engineering and construction methods including its practice and procedures.
    • Demonstrated experience in working on engineering teams on at least 3 projects of total value US$10MM each.
    • Familiar with codes, standards, regulations and practices applicable to the design and construction of onshore and offshore structures/production facilities in the United States, including o Civil / Structural API, AISC, AWS D1.1, CP110, CP 114 etc. o Electrical / Instrumentation – e.g. IP, API, NEC, ISA, ANSI, AGA, NEMA, etc. o Mechanical – e.g. API, ANSI, ASME, NACE, etc. o Process - e.g. API, ANSI, ASME, NACE, etc.

    go to method of application »

    Lead Project Controls Engineer

    Job Description

    • Assists and advises Project Manager and Lead Engineer in relation to project estimating, schedule and cost control.
    • Preparation of reports and presentations related to project controls, including status reports
    • Review and analysis of project control data to predict possible problems, particularly in schedule slippage and cost overruns.

    Requirements

    • Bachelor’s Degree in Engineering or Project Management Institute Certification.
    • 10 years of experience in project controls across all aspects of projects, including design, construction, procurement, construction and installation.
    • 5 years’ experience related to oil facilities, petrochemical, or oil and gas handling projects.
    • Demonstrated proficiency in computer skills, including resource loaded schedules using commercial packages such as Microsoft Project , cost systems such as JDE or SAP, and Estimating programs and data base systems.

    go to method of application »

    Construction Manager

    Responsibilities

    • Supervision of the development and construction within “The Company Locations” and at related locations, as designated by the Employer.
    • Supervision of the contractors, personnel and other persons and/or entities involved in the development of property in COMPANY LOCATION and at related locations, as designated by the Employer.
    •  Development of detailed master plan for the COMPANY LOCATIONS.
    • Forward planning of facilities, services, supporting infrastructure, personnel and other related items required for development and management of property in “The Company Location” (“COMPANY LOCATION”).
    • Forward planning of infrastructure required for the industrial village.
    • Planning and developing layout of infrastructure for LFZ.
    • The Employee will be required to provide assistance to the Company in a wide range of areas, in line with the Employee’s field of experience/expertise.
    • The Employee may also be required to perform duties not directly related to his/her area of experience or expertise, in which case proper instruction will be provided by the Company.
    • Ensure that the highest ethical standards are maintained in all activities.
    • Conduct himself / herself in a dignified and respectful manner that reflects well on the Employer and also sets an example for the other employees.

    Requirements

    • University Degree (2.1 or higher) - Preference will be given to candidates with Civil Engineering qualifications and/or other industry related qualifications - ALL grades should be provided.
    • Preference will be given to Candidates that  - Have experience in working in, designing and building Free Zones, towns, general infrastructure - Have worked in multinational / FTSE100 companies - Hands on experience and management  - Over 10 years’ experience.

    Primary Skills:

    • Engineering, EPC, Oil & Gas, Operations, Production.

    go to method of application »

    Senior Project Cost Controller

    Job Description

    • Work independently or under the guidance of a Lead Project Controls Engineer to assist and advise Project Management in relation to project cost control.
    • Preparation of cost reports and presentations.
    • Review and analysis of project cost data to forecast cost trends.

    Requirements

    • Bachelor's Degree or Project Management Institute Certification with 5 years of upstream oil and gas project controls experience, OR.
    • Associates Degree with 8 years of upstream oil and gas project controls experience, OR.
    • No degree with 10 years of equivalent technical experience of which 8 years are in oil and gas design.
    • Demonstrated proficiency in computer skills, including producing and maintaining project cost systems using commercial products such as JDE, SAP all Microsoft Office products.

    go to method of application »

    Cost Estimating Engineer

    Job Description

    • Assists and advises Project Manager and Project/Lead Engineers in relation to cost estimates.
    • Coordinate cost estimating activity and input from various disciplines and departments.
    • Compiles, checks and benchmarks cost estimation data.
    • Estimate the project cost based on Bill of materials, labor cost, and project specification to express the most representative cost estimate.
    • Collect and update market price data of materials, equipment, and manpower to be used in the cost estimate.
    • Analyze project cost estimate of the project based on economic parameters.
    • Perform sensitivity analysis on the estimates and cash flow forecasts to determine cash requirements and potential problem areas and corrective action to be taken.

    Requirement

    • Bachelor's Degree in Engineering or Project Management Institute Certification.

    go to method of application »

    QA / QC Engineer

    Responsibilities

    • Support asset integrity/maintenance engineering, offshore and onshore for all CMMS and integrity / certification requirements.
    • Will be required to travel to each of the locations as and when required to integrate with the field maintenance teams.
    • Co-ordinate the spares, materials, resources, inspection / certification requirements for both onshore and offshore locations.
    • Implement a planning regime for inspection, recertification activities into a 90-day activity plan, 12 month look-ahead and 5 year long term plan, which should be driven by the CMMS.
    • Assist to develop a functional asset register, with the assistance of the M.E. Planner, and a program of recertification in line with DPR requirements.
    • Set KPI’s for equipment / plant recertification and contractor based on schedule of recertification and performance of contractor.
    • Develop, maintain and manage a fit-for-purpose and cost effective Computerized Maintenance Management System (CMMS) for all respective assets.
    • Plan and schedule the inspection and re-certification of all the companies’ facilities in line with legislative requirements.
    • Responsible for implementing upgrades, updates and patches to the CMMS software.

    Requirements

    • An HND or equivalent in an engineering discipline is essential with at least 10 years’ operational experience in the oil industry.
    • Level II UT/MPI/DPI/RT ; API 510 & 570 Authorize Inspector.
    • Operational maintenance management experience with a bias towards inspection and CMMS.
    • Ideally 20-30 years old.
    • Good written/spoken English and proficient in Computer.
    • Team player, good interpersonal, communications and organizational skills are essential.

    go to method of application »

    Process Engineer

    Job Responsibilities

    • Carry out process engineering studies and provide assistance to any process activity needed to support operations at site.
    • Carry out process engineering studies within the context of site modifications (SMR) or field development / facilities upgrade projects.
    • Participate in the SMR Process by following up on implementation of SMRs from initiation to completion.
    • Support Contractors to prepare Scope of Work or review/validate process studies by Contractors.
    • Perform core process design activities as instructed by lead design engineer.

    Requirements

    • Degree in Mechanical or Chemical Engineering ( minimum of 2nd class upper).
    • 5 years’ minimum experience in process engineering design in the oil/gas industry.
    • Should be proficient in the use of Process simulation software e.g., ProII, HYSYS.
    • Valid medical certificate acceptable to COMPANY.
    • Valid BOSIET/HUET (including CA-EBS)certificate for offshore missions.

    go to method of application »

    Maintenance Manager

    Responsibilities

    • Overall responsibility of maintenance turnover, cost and revenue objectives.
    • Lead and organize the maintenance team to ensure service quality and customers satisfaction.
    • Develop and implement initiatives to continually develop OTIS maintenance contracts.
    • Responsible for the overall safety of maintenance activities, including staff, subcontractors and third parties.
    • Handle customers complain and apply Kaizen's procedure to avoid repetition of mistakes when they occur.

    Requirements

    • B.Sc / HND in Mechanical / Electrical or Industrial Engineering.
    • Post-graduate degree in Business Management would be an added advantage.
    • Experience in similar role with any brand of Lift is an added advantage but not a compulsory requirement.
    • 10-12 years post graduate relevant experience in service or solution delivery industry.
    • Resilient and result oriented.

    Primary Skills:

    • Maintenance Supervisor, Installation Engineer, Instrumentation Engineer, BSc, Engineering, MS Office, MS Power Point, Quality Control.

    go to method of application »

    Senior Project Engineer

    Job Responsibilities

    • Plan and execute delivery of assigned oil & gas and infrastructure projects that meet the expectations of stakeholders, on time and within budget Desired Attributes.
    • Understanding of various disciplines – core and supporting, that are required for project execution.
    • Ability to develop and work with project plans and schedules including associated cost profiles.
    • Knowledge of the marketplace and impact of same on project execution strategies.
    • Understanding of project reporting requirements of various stakeholders and ability to generate same.
    • Understanding of the company’s Opportunity Realization Process.
    • Working knowledge of company-adopted project management methodologies and systems.
    • Understanding of project risks and ability to develop strategies for their management.
    • Understanding of various disciplines – core and supporting, that are required for project execution.
    • Ability to develop and work with project plans and schedules including associated cost profiles.
    • Knowledge of the marketplace and impact of same on project execution strategies.
    • Understanding of project reporting requirements of various stakeholders and ability to generate same.
    • Understanding of the company’s Opportunity Realization Process.
    • Working knowledge of company-adopted project management methodologies and systems.
    • Understanding of project risks and ability to develop strategies for their management.

    Requirements

    • Good University Degree in Engineering.
    • Minimum of 12 years experience in oil and gas facilities engineering that must include project engineering.

    go to method of application »

    Project Manager

    Job Description

    • Overall responsibility for delivery of the identified project within schedule, cost and to the agreed quality
    • Develop project budget and schedule in accordance with Company Contractual Requirements
    • Manage and Coordinate the project team, contractors and all activities associated with delivering a high quality project as measured by industry KPI’s and metrics for projects of a similar size and complexity
    • Develop and get approval for project organization and job descriptions to ensure clarity of responsibilities
    • Develop and maintain project execution plan to ensure successful project delivery with respect to HSE, Schedule ,Quality and Cost

    Requirements

    • Candidate with Mechanical Engineering Background.
    • Experience with Instrumentation.
    • 15 years of proven work experience.
    • Relevant Professional certifications.
    • Significant experience in senior role in Oil and Gas sector.
    • Knowledge of Oil Field contracts and contracting strategies.

    go to method of application »

    Engineering Manager

    Requirements

    • Bachelor's Degree in a Core Engineering discipline.
    • Master’s degree or equivalent will be an added advantage.
    • Registered member of COREN and other relevant professional Engineering Associations.
    • Minimum of 15 years’ experience within the oil and gas industry with 8 years proven track record in Construction Engineering design.
    • Strong experience leading a team of Piping Design Engineers and draftsmen.
    • Vast experience in FEED and detailed design engineering.
    • Must have worked as a Senior Project Engineer or Construction Superintendent/Manager at an Oil and gas construction site.
    • Strong project management experience is mandatory.
    • Capable of working seamlessly with other functional groups to achieve the project goals.
    • Capable of interfacing with clients and regulatory agencies on behalf of the company.
    • Good knowledge of brown field engineering is necessary.

    Primary Skills:

    • B.Sc Engineering, COREN, Field Engineering, Project Management.

    go to method of application »

    Lead Design Engineer

    Job Description

    • Plans, schedules, and supervises the overall design and engineering activities, either within or cross discipline.
    • Coordination of inter disciplinary checks, design reviews and HAZOPS or similar.
    • Completion of conceptual scopes of work and preliminary designs.
    • Review and management of project and general specifications, engineering procedures and engineering policy.
    • Responsible for all work completed in his/her section.
    • Prepares the documentation for all projects and ensures that it is properly archived.
    • Responsible for the training and development of engineers in his/her section.
    • Prepare staff evaluations.

    Requirements

    • Bachelor's Degree in Engineering.
    • Registered Professional Engineer.
    • 12 years discipline design experience with at least 8 years’ experience in engineering design of oil facilities, petrochemical, or oil and gas handling projects.
    • Thorough knowledge of oil field engineering and construction methods including its practice and procedures.
    • Demonstrated experience in working on engineering teams on at least 3 projects of total value US$15MM each.
    • Familiar with codes, standards, regulations and practices applicable to the design and construction of onshore and offshore structures/production facilities in the United States, including o Civil / Structural API, AISC, AWS D1.1, CP110, CP 114 etc. o Electrical / Instrumentation – e.g., IP, API, NEC, ISA, ANSI, AGA, NEMA, etc. o Mechanical – e.g., API, ANSI, ASME, NACE, etc. o Process - e.g., API, ANSI, ASME, NACE, etc.

    go to method of application »

    Construction Engineer

    Requirement

    • Candidates should possess relevant qualifications.https://www.hobarkintl.com/careers/#viewJob=HIL_EPC/021

    go to method of application »

    Project Engineer

    Description

    • Plans, schedules, conducts, and coordinates assigned engineering projects; monitors work for compliance to applicable codes, accepted engineering practices, and Company standards, as well as costs, time, and quality.
    • Develop and maintain project execution plan to ensure successful project delivery with respect to HSE, Schedule, Quality, and cost.
    • To create a work breakdown Structure for daily work schedule, based on management agreed methodology for the site work.

    Requirements

    • Bachelor’s Degree in Engineering.
    • Minimum of 6 years in project engineering in Oil and Gas industry.

    Primary Skills:

    • Interpersonal Skill.

    Method of Application

    Use the link(s) below to apply on company website.

     

    Build your CV for free. Download in different templates.

  • Send your application

    View All Vacancies at Hobark International Limited (... Back To Home

Subscribe to Job Alert

 

Join our happy subscribers

 
 
Send your application through

GmailGmail YahoomailYahoomail