Job Openings at Amaiden Energy Nigeria

MAIN FUNCTIONS

• Evaluate and comment on discipline engineering work performed both internally and by Contractors and sub-contractors to ensure that work is being executed in accordance with Company specifications, company standards, and regulatory requirements. Facilitates effective execution of discipline engineering and design routines that align with the team's goals, objectives, and procedures. Assures accurate and timely communication among the team and other company Functions on discipline engineering activities, progress, and issues. In addition to technical ability, they should demonstrate sound communication, facilitation, and interpersonal skills.

TASKS AND RESPONSIBILITIES

• In addition to Level 1 and 2 tasks and responsibilities, Level 3:
• See additional skills and qualifications below.

Job Requirement

SKILLS AND QUALIFICATIONS

• Master’s degree in Mechanical Engineering or related engineering specialty, or equivalent professional experience
• Extensive knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
• Demonstrates strong leadership skills that align with the company’s mission, vision, and values
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs
• Read, write, and speak fluent English, especially as it applies to technical and business communications

go to method of application »

MAIN FUNCTIONS

• Responsible for stewarding and administering vendor contracts and/or orders to ensure uninterrupted goods/service delivery to buyers and compliance with controls. Responsible for researching and analyzing existing contracts and making recommendations on various issues. Monitors and manages contract expiration dates. Works with moderate work direction and is skilled and knowledgeable to the position.

KEY REPONSIBILITIES

• Create and amend Service Requests for Production Operations contract services providers that exist on Company’s SAP system.
• Create Service Entries for Production Operations contract agreements existing on Company’s SAP system.
• Liaise with Contractor Representatives on a daily basis to address issues that may arise from the placement and amendment of purchase orders and the payment of invoices for work executed against those purchase orders.
• Provide contract status reports to management for review.
• Ensure effective contract administration through records management, advice and compliance with procurement, controls, oi and business requirements.
• Provide support to Accounts Payable as required.
• Coordinate with field personnel and confirm that Contractor performance evaluations (on-going or end-of-service) results are captured for future contract consideration.
• Work with Contract Advisor and Representatives to identify performance and efficiency improvement opportunities in contracts.
• Work closely with Procurement on contract renewal, contract award, contract resolutions and contract follow-up action items.

Job Requirement

SKILLS AND QUALIFICATIONS

• Microsoft Excel and other analysis tools
• Experience within a large corporation or complex organizational setting.
• Experience working with developing businesses, and also Landowner Companies (LANCO’s).
• Experience in engaging with contractors, in a developing country environment.
• Experience of using SAP (or other) computerized maintenance management tools.
• Business and ethics compliance.
• Understanding of company expectations relating to controls, reporting and compliance
• Understanding and knowledge of the local country’s commercial environment, and the role of government and regulatory authorities.
• Ability to integrate security and community objectives into plans for Service Contracting.
• Budgetary reporting and analysis skills
• Solid written communication and reporting skills
• Maintenance and Reliability (M&R) processes
• Understanding of Procurement roles, responsibilities and business processes as they relate to contracts
• Knowledgeable of contracts terms and conditions
• Highest standard of Safety, Health, Environment aptitude and cultivates the same in others
• Good observation and listening skills
• Demonstrates high level of initiative.
• Good interpersonal and motivation skills.
• Good communications and presentation skills
• Good organizational and administrative skills
• Good communication skills (oral & written) in English
• Ability to interact in a multI-cultural environment
• Good Planning, execution and organizational skills
• Excellent computing skills
• Ability to work independently

go to method of application »

MAIN FUNCTIONS

• Responsible for stewarding and administering vendor contracts and/or orders to ensure uninterrupted goods/service delivery to buyers and compliance with controls. Responsible for researching and analyzing existing contracts and making recommendations on various issues. Monitors and manages contract expiration dates. Works with moderate work direction and is skilled and knowledgeable to the position.

KEY REPONSIBILITIES

• Create and amend Service Requests for Production Operations contract services providers that exist on Company’s SAP system.
• Create Service Entries for Production Operations contract agreements existing on Company’s SAP system.
• Liaise with Contractor Representatives on a daily basis to address issues that may arise from the placement and amendment of purchase orders and the payment of invoices for work executed against those purchase orders.
• Provide contract status reports to management for review.
• Ensure effective contract administration through records management, advice and compliance with procurement, controls, oi and business requirements.
• Provide support to Accounts Payable as required.
• Coordinate with field personnel and confirm that Contractor performance evaluations (on-going or end-of-service) results are captured for future contract consideration.
• Work with Contract Advisor and Representatives to identify performance and efficiency improvement opportunities in contracts.
• Work closely with Procurement on contract renewal, contract award, contract resolutions and contract follow-up action items.

Job Requirement

• Microsoft Excel and other analysis tools
• Experience within a large corporation or complex organizational setting.
• Experience working with developing businesses, and also Landowner Companies (LANCO’s).
• Experience in engaging with contractors, in a developing country environment.
• Experience of using SAP (or other) computerized maintenance management tools.
• Business and ethics compliance.
• Understanding of company expectations relating to controls, reporting and compliance
• Understanding and knowledge of the local country’s commercial environment, and the role of government and regulatory authorities.
• Ability to integrate security and community objectives into plans for Service Contracting.
• Budgetary reporting and analysis skills
• Solid written communication and reporting skills
• Maintenance and Reliability (M&R) processes
• Understanding of Procurement roles, responsibilities and business processes as they relate to contracts
• Knowledgeable of contracts terms and conditions
• Highest standard of Safety, Health, Environment aptitude and cultivates the same in others
• Good observation and listening skills
• Demonstrates high level of initiative.
• Good interpersonal and motivation skills.
• Good communications and presentation skills
• Good organizational and administrative skills
• Good communication skills (oral & written) in English
• Ability to interact in a multI-cultural environment
• Good Planning, execution and organizational skills
• Excellent computing skills
• Ability to work independently

go to method of application »

MAIN FUNCTIONS

• Define scope of all pre-commissioning and commissioning activities, assign workloads, review and implement standards/procedures including man hour estimating, cost estimating, budgeting, and progress reporting for Instrumentation scope for all phases of the project. Supports development and execution of centralized engineering services for existing upstream production operating units and new upstream capital projects to maintain safety availability and reliability of the instrument and control systems while optimizing cost.

TASKS AND RESPONSIBILITIES

• Liaise with customers, vendors, engineers, and other disciplines as required.
• Participate in HAZOP/ LOPA reviews and in other technical, constructability and quality reviews
• Assist in the Design, Review and Approval of Instrumentation related engineering deliverables, i.e. instrument indexes, installation details, location drawings, datasheets, wiring drawings, loop drawings, P&ID's, material requisitions, evaluation of alternatives and selection of instruments, calculations (control valve, flow elements, pressure safety valves), document control logs, bill of materials and instrument change approvals.
• Support project Acceptance Testing (AT) including: reviewing procedures, assigning resources, periodically attending AT, and adjust commissioning scope to integrate AT successes and deficiencies.
• Develop, track, and adjust commissioning execution schedule.

Job Requirement

• Previous experience in a closely related position and/or supervisory experience in related field
• MS or advanced degree in Electrical or Mechanical Engineering or related engineering specialty, or equivalent professional experience
• Extensive knowledge of discipline design standards, specifications, codes, and appropriate safety criteria
• Able to review, evaluate, and update cause and effect, P&IDs, logic and architecture diagrams and control narratives
• Experience in selection, application, and ISA data sheet specification of hardware including pressure/ temperature /level instruments, control valves, shutdown valves, and fire/gas detection
• Proficient in data collection and analysis with common database and software data analysis tools such as SAP, Analytics for Excel and Tableau
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs
• Read, write, and speak fluent English, especially as it applies to technical and business communications

go to method of application »

MAIN FUNCTIONS

• Provides planning support to Well Management Engineers and onsite Company representative at the wellhead platform to support the safe and efficient execution of wellwork, workover or well intervention and related plans. Is the primary contact for execution readiness and directly supervises Service Partner personnel at all stages of the operations. When offshore, supports Wellwork Coordinator with in-field information to ensure Service Partner personnel work accomplishment, execution needs, logistics for personnel, equipment and services are appropriately organized and managed.

TASKS AND RESPONSIBILITIES

• Internal: Immediate work group and interfaces with engineering teams
• External: Work effectively with Service Partners, PIC, Projects and Maintenance reps in SIMOPS area to ensure safe and efficient operations.
• Responsible for communicating expectations regarding safety, security, health, and environment; provides guidance and supports managing Safety, Security, Health, and Environment (SSHE) events
• Responsible for communicating oi Systems - oi, Wellwork Integrity Management System - WIMS and Work Management System - WMS expectations on the job site
• Responsible for troubleshooting new/evolving issues to determine root cause (including non-routine failures)
• Monitors wellwork operations to provide feedback and input to the Wellwork Coordinator and Operations Superintendent to ensure procedures are properly followed and emergency situations are appropriately managed
• Responsible for assisting Engineering team in development and evaluation of wellwork procedures / programs for execution feasibility and completeness.
• Responsible for ensuring all applicable procedures are followed as approved and utilizes management of change processes if changes are required
• Responsible for generation of accurate and adequate operations reports
• Influence and interface with Engineering Team with emphasis on providing an understanding of operational and business risks
• Support QA/QC team with inspection of service partner equipment in preparation for field mobilization
• Verify all equipment/supplies received are as ordered and specified in wellwork program and all inspections are up to date
• Verify equipment rig-up and testing are according to Company standards. Review and validate function and pressure testing of BOP Equipment.
• Identify opportunities to improve work processes. Capture and submit all Lessons Learned
• Write detailed handovers notes for review with oncoming supervisor
• Mentor / coach early career and less experienced WellWork Supervisors, Production Operators and Engineers
• Coordinate, develop and deliver formal training as required
• Supports onsite surveillance requirements for the execution operation
• Interfaces with engineering to ensure understanding of wellwork objectives and procedural requirements
• Perform relief duties as Wells Operations Superintendent (as required)

Job Requirement

• Minimum 10 years’ industry experience including wellwork supervisory roles for wellwork, workover, rigless intervention or hydraulic workover unit operations
• Prior experience working for an operator or slickline, coiled tubing or wireline service provider
• Hold current certification for Well Control

go to method of application »

MAIN FUNCTIONS

• Provide guidance and advice on technical aspects of geophysical source, sensors, positioning, and recording systems prior to commencement of field operations. Conduct an audit of the seismic contractor’s energy source and recording equipment to ensure compliance with manufacturer’s specifications and Company’s requirements. The technical audit is envisaged to be a stand-alone item and the engineer are not expected to form part of a QC team.

TASKS AND RESPONSIBILITIES

• Responsible for verifying the vendors and their subcontractors source, sensors, positioning, and recording systems adhere to manufacturers specifications, contract requirements and industry standards
• Responsible for communicating Technical, Operational and SSH&E concerns and issues to Company office personnel to ensure project proceeds according to Company standards
• Responsible for coordinating testing and verification of field equipment with vendor and their subcontractors
• Responsible for adhering to SSH&E project requirements
• Responsible for reporting perceived limitations and the readiness of vendor’s crew and equipment to commence field operations

Job Requirement

SKILLS AND QUALIFICATIONS

• Experience in technical auditing for the type of equipment proposed; Company experience preferred
• Must have technical skills to monitor and advise on technical aspects of data acquisition, including; logistics, operations, sensors, source, instrumentation, equipment, recording, and positioning
• Must be well versed in SSH&E practices and processes for field operations
• Advanced knowledge with geophysical systems and equipment proposed by vendor for the survey
• Must have excellent communication skills, possess high level of integrity, and willingness to build trust and accountability in inter-personal relationships while working in team setting
• Must be fluent in both written and spoken English
• Must be proficient in current communication mediums and technologies (i.e., Microsoft Office, telecommunications, email, meetings)
• Must be in good physical condition and shall comply with all project health and safety requirements (including any vendor, vessel or country-specific certifications required to work in the area of operations)
• Must comply with requirements of the agreement.
• Certifications must be current and not due to expire for the anticipated duration of the project

go to method of application »

MAIN FUNCTIONS:

• Technicians are assigned to carry out maintenance work. This can either be an Company (XOM) employee or a Contractor resource. Typically reports to a supervisor.

TASKS AND RESPONSIBILITIES

• Estimates work load to establish completion dates.
• Assists mechanical engineers in the planning and testing of mechanical components, equipment, and machinery, such as engines, instruments, controls, robots, machines, etc.
• Helps prepare proposals and cost estimates.
• Actively participate in the use of all on the job safety tools
• Review job packs
• Identify any safety issues associated with job end ensure removal/mitigation prior to working
• Execute work as planned
• Record technical history as required by workgroup. (Global Reliability Tool (GRT), data sheet, etc.)
• Provide feedback on job pack improvements to Execution FLS
• Request permits and notify Supervisor if permit cannot be issued within 30 minutes of requested time

Job Requirement

• Discipline appropriate certification(s) if applicable or equivalent professional experience
• Strong communication skills; ability to clearly and concisely describe conditions in the field and recommend remediation steps
• Team Player; exhibits effective teamwork when working with persons over whom the person may have no direct authority and willingness to assist others
• Ability to adapt to tight deadlines, heavy workloads, and frequent changes in priorities
• Proficient in Microsoft Office suite of software programs

go to method of application »

Description

• The Completion Engineer position is responsible for :
  Participates to the preparation, planning, optimization and follow-up well site execution of well completion operations.
• Provides technical support during well site operations. Ensures procedures are followed by well site supervisors. Where applicable
• Ensures MOC are written and risk assessments are carried out and communicated to the well site team in a timely manner
• Participates to CWOP and risk assessment sessions for completion and workover operations.
• Ensures lessons learnt and best practices are communicated to service company and other stakeholders
• Follows well KPI and service quality database, and benchmark operations against ‘’best composite’ performance
• Follow up and close out any highlighted improvement actions.
• Participates in contractor site/process technical and safety audits
• Ensures completion schematics and final tallies are correct and uploaded into WELLVIEW.
• Participate to LEAN, cost rationalization and continuous improvement culture within the completion team through-out the well
• delivery cycle
• In liaison with the Drilling Engineering team, participates to the End of Well report preparation
• Liaises with GSR, ECP, FOPs and Contractors to ensure optimization of well operations program and Completions well equipment
• preparation.
• Prepares CFT documents for completion, workover, and well test operations. Performs CFT technical assessment and makes
• recommendation to the C&P teams.
• Prepares handover documents and communicate to Field Operations well parameters and non-conformances
• Prepares completion designs in line with SOR requirements. Performs tubing stress analysis, sand control, corrosion/erosion and
• any other studies required for the completion of the designs.
• Writes well programs, ensures completion equipment is prepared, is fit for purpose, and meets well timelines. Ensures risk
• Assessments and HAZID/HAZOP are carried out prior to the completion of operations.
• Proposes new ideas and innovations to improve well performance and well operations performance and reduce risk and/or cost.

Job Requirement

• Minimum of a bachelor's in the engineering domain
• 3–6 years of completion-related experience. Minimum of 3 years offshore/onshore completions operations
•  Strong knowledge of completion engineering, drilling and workover operations; Intermediate knowledge of well interventions; Basic knowledge of GSR and operational technical logistics
• In-depth knowledge of well equipment, well components, drilling and completion techniques
• Ability to demonstrate problem  solving skills for process and technical issues
• Basic experience in contracts management and basic finance
• Good oral, written presentation and communication skill in English language
• Excellent analytical, reporting, communication, leadership, and negotiation skills
• Sound knowledge of the regulations (and best practices) governing well completion
• Team spirit and good interpersonal skills
• Possession of the following certifications:
• BOSIET /THUET certificate and annual medical examination certificate.
• Category A, Emergency Breathing System (CA-EBS).
• Shall possess a valid OSP (Offshore Safety Permit)
• International Well Control Forum (IWCF) Certificate Level-4

go to method of application »

Description

• Provide piping discipline knowledge and experience to the ECP engineering team.
• Responsible for safe and cost optimization of Piping designs and products selections.

ACTIVITIES

• Carry out preliminary, basic, and detailed piping engineering studies and produce associated deliverables, e.g.
• MTOs, datasheets, general arrangement drawings, isometrics, specifications, stress analysis, support drawing etc.
• Review piping discipline engineering deliverables to ensure technical quality.
• Review designs produced by COMPANY or contractors to ensure compliance with COMPANY piping general specifications and applicable project piping specifications.
• Develop and contribute to equipment specifications for procurement purposes.
• Review of subcontractor piping deliverables to ensure technical quality.
• Read and interpret facility engineering drawings and make necessary modifications or recommendations.
• Advise ECP, FO and other departments on piping related issues, including suggesting technical solutions to problems, identifying best practices, etc.
• Liaise with suppliers and manufacturers of piping and other equipment and materials to ensure technical specifications are understood and met.
• Participate in Hazard Identification Studies (HAZID), Hazard and Operability Study (HAZOP), and risk reviews meetings in-house and with the client
• Prepare and cross-check relevant procedures, international standards and COMPANY technical specifications for application into design activities
• Proficient in development/reviewing 3D models from Piping and Instrumentation Diagram (P&ID) requirements, safety and integrity requirements, operation & maintenance requirements, good engineering practices, and client comments/requirements.

ACCOUNTABILITIES

• Compliance with ECP HSE KPI & Objective and assist ECP in compliance with overall COMPANY HSE requirement.
• Effective and timely delivery of piping technical deliverables of an acceptable quality.
• Verify piping engineering and design deliverables comply with COMPANY general specifications and applicable project piping specifications.

Job Requirement

• Minimum Qualification: University Degree in piping or mechanical engineering with 5 to 10 years’ experience in Oil & Gas production facilities.
• Familiarity with international standards and regulations.
• Teamwork, commitment to technical accuracy, ability to organize and execute works unassisted.
• Use of MS-Office and AutoCAD, Ceaser 11, PDMS/ED3 with an experience in project specifications could be added advantage