Subscribe to Job Alert
Join our happy subscribers
Never pay for any CBT, test or assessment as part of any recruitment process. When in doubt, contact us
Job Summary
The Able Bodied Seaman carries out cargo handling duties, general cleaning, maintenance, and other manual labor as required.
Key Responsibilities:
Prepare cargo for lift by attaching slings through shackles or other attaching devises.
Check loads for clearance, obstructions, balance and proper attachment.
Give or relay hand signals and / or radio signals to crane operator to control the lift and movement of the load.
Ensure to use correct body positioning and safe lifting procedures.
Remove waste, debris and accumulated trash from decks, stairs, and compartment
Qualifications & Experience
OND
Minimum of 4 years upstream drilling experience
Valid medical and BOSEIT certificate
Valid Unlimited AB certificate
Job Summary
The Assistant Dynamic Positioning Operator (ADPO) operates the automated and fixed station keeping system of the vessel.
Key Responsibilities:
Among other responsibilities, he is expected to:
Operate the dynamic positioning (DP) equipment under the direction of the Sr. DPO, DPO or Chief Mate.
Operate and understand the Ballast Control System, Power Management System and Fire and Gas Detection Systems.
Maintain the vessel in a stable condition and at the correct draft and trim.
Assist in setting up the DP System operational parameters.
Assist with running and maintaining records for hydrophones and subsea beacons.
Assist with performing preventative maintenance on the DP equipment.
Stand navigational watch as required.
Qualifications & Experience
High School Diploma or Equivalent
1 - 4yrs working experience
Mandatory Certification for ADPO
Nautical Institute DP Course & DPO Cert
Valid Medical Examination
Job Summary
He assists the Driller in the planning and execution of all drilling operations for the main or auxiliary well centers. Also responsible for operating all drilling, hoisting and mud circulating equipment, following directions from the well program in accordance with company procedures, in a safe and efficient manner
Key Responsibilities:
Act as a Safety Leader ensuring the ongoing identification of hazards and the implementation of controls to manage the associated risks with a special focus on Well Control, Permit to Work and Isolation procedures
Actively participate in holding daily preâ€Âtour meeting and preâ€Âjob meetings as often as required
Follow standard instructions and maintain good communication with the Driller
Ensure that operations are planned, organized, supervised and executed in accordance with well programs and plans
Assist Service Partners with the preparation of equipment for upcoming drilling operations.
Organize and supervise all drilling crew operations
Qualifications & Experience
Three years offshore experience including time on a floating rig (preferably drillship).
Fluent English communication skills (oral and written)
Demonstrated leadership and organization skills
Training and Certification requirements for the Assistant Driller position
Knowledge of all technical calculations required for the safe operation of the drilling unit and control of the well
Current well control certificate (subsea)
Job Summary
Operates vessel communications equipment, answer phones, carry out clerical duties such as filing and typing as directed.
Key Responsibilities:
Receive and transmit messages between the vessel and shore bases, supply vessels, helicopters, and other stations by radio telephone.
Operate all communications equipment in the radio room; ensure they are well maintained and operational.
Ensure the maintenance of all electronic navigational aids where applicable.
Provide clerical / administrative support to the Master as required.
Coordinate crew changes by helicopter and boats.
Qualifications & Experience
High School diploma or equivalent Work experience in the position
Fluent English communication skills (oral and written)
Valid GMDSS General Radio Operator's certificate.
Valid medical examination
Basic computer skills
Job Summary
He oversees all deck and cargo operations aboard the ship and the conduct of these operations in accordance with company policies and procedures. This includes the supervision of all crane operators and roustabouts and ensuring that deck and lifting operations proceed in a safe and efficient manner
Key Responsibilities:
Perform all work according to agreed expectations of both internal and external customers
Supervise all crane and deck operations, such as picking up or laying down tubular, running riser and casing, and the loading/stowage of deck cargo and equipment.
Coordinate all boat operations, particularly the loading and unloading of bulk products and deck cargo from various support vessels.
Regularly and clearly communicate with client representatives and logistic coordinators.
Regularly and clearly communicate with the Toolpusher to ensure full support of the Drill-Floor and with the Bridge regarding crane operations and supply boats.
Provide Crane Operator and Roustabouts with relevant instructions for current and forthcoming operations.
Qualifications & Experience
Minimum 5 years experience as offshore crane operator
Completion of all mandatory training and certification requirements for Deckpusher
Knowledge of all off shore technical operations.
Job Summary
In charge of the Able Bodied(AB) Seaman, marine operations on deck, and the maintenance of the deck machinery
Key Responsibilities:
Provide deck crew with relevant instructions for current and forthcoming operations.
Plan and supervise deck maintenance.
Determine the type of rigging, scaffolding, et cetera, required for specific jobs.
Routine maintenance of the vessel’s equipment, such as navigational lights, anchor windlass, winches, lifesaving and firefighting equipment and all main and auxiliary equipment associated with seaworthiness.
Use of radio equipment or telephone for helicopter or vessel support.
Qualifications & Experience
High School diploma or equivalent Work experience in the position
Fluent English communication skills (oral and written)
Valid Able Seaman certificate
Valid medical examination
Basic computer skills
Job Summary
The Crane Operator is responsible for crane and lifting operations aboard the ship and the conduct of these operations in accordance with company policies and procedures. This includes the supervision of all roustabouts and ensuring that all deck operations proceed in a safe and efficient manner.
Key Responsibilities:
Perform all work according to agreed expectations of both internal and external customers
Responsible for the safe and efficient operation of the crane (s) and supervising all roustabouts
Ensure Drill Floor and other departments about the rig receive the equipment necessary for its efficient operation
Inspect crane structure and boom and wires for damage before each use, also conduct functional checks of crane safety devices. (i.e. gauges, indicators, limit switches, cables, etc
Ensure that all items to being lifted are provided with appropriate lifting points and are correctly rigged with certified gear (i.e. slings, straps, shackles, wire ropes, etc).
Provide Roustabouts with relevant instructions for current and forthcoming operations.
Qualifications & Experience
Fluent English communication skills (oral and written).
Minimum 2 years experience as offshore crane operator on a floating unit.
Completion of all mandatory training and certification requirements for Crane Operator.
Job Summary
The Motor Operator is responsible for assisting in completion of the preventative / corrective maintenance and ongoing repairs pertaining to power plant, dynamically positioning machinery and living quarters. Makes daily rounds to complete engine room logbook and performs watch stander duties.
Key Responsibilities:
Act as a safety leader ensuring the ongoing identification of hazards and the implementation of controls to manage associated risks with a special focus on safe working practices, permit to work system and isolations.
Executes preventative and corrective maintenance, repairs of hydraulic, pneumatic and mechanical components of;
Power Plant and Auxiliary Systems, Dynamically Positioning Equipment and Auxiliary Systems
HVAC systems, Remote Operated Valve Systems
Ballast and Bilge Systems, Boilers, Incinerator and Auxiliary Systems
Compressed Air Systems and equipment including both Service and Starting Air; Lifeboats and Fast Rescue Craft
Living Quarters and related Support Systems
Emergency Shutdown Systems, Safety Systems and Zero Discharge equipment
Qualifications & Experience
High school diploma or equivalent
A minimum of 2 years experience in this position and demonstrated ability of oral and written communications
Holds a valid Certificate of Competency with the required qualification and certificates
Job Summary
Performs all tasks related to drilling fluid management including operating and maintaining drilling fluid pumping, treatment and mixing systems.
Assists also in the execution of all drilling operations for the main or auxiliary well centers as required by the client
Key Responsibilities:
Actively participate in daily preâ€Âtour meeting and preâ€Âjob meetings as often as required by the operations.
Supervise the Pumphand, Floorhands and Roustabouts when they are involved in mixing operations.
Ensure that operations are planned, organized, supervised and executed in accordance with well programs, rig move plans, Drilling requirements and contractual obligations.
Perform the Mud Systems Operators daily checks i.e. QHSE checks, tank volumes, manifold line ups etc.
Assist and relieve the Assistant Driller as required.
Monitor the mud tanks during operations and report any unexplained tank level, or mud property changes to the Driller.
Qualifications & Experience
Three years offshore experience including time on a floating rig (preferably drillship).
Basic computer skills
Completion of all training and certification requirements for the Mud Systems Operator position
Job Summary
The Pumphand will work in the mud pump room and assist Mud Systems Operator in performing all tasks related to drilling fluid management including operating and maintaining drilling fluid pumping, treatment and mixing systems
Key Responsibilities:
Follow standard instructions and maintain good communication with the Mud Systems Operator and inform of any concern, ensuring any deviation is properly communicated and documented.
Ensure that operations are planned, organized, supervised and executed in accordance with well programs, rig move plans, Drilling requirements and contractual obligations.
Assist the Mud Systems Operators in performing daily checks i.e. QHSE checks, tank volumes, manifold line ups etc.
Qualifications & Experience
Three years offshore experience including time on a floating rig (preferably drillship).
Basic computer skills
Completion of all training and certification requirements for the Pumphand position
Job Summary
The Quality and Training Advisor (QTA) is responsible for advising offshore personnel on Company Drilling Quality, Health, Safety, Environment, and Training management systems on board the vessel. The QTA assists in enhancing the QHSE skills of crew.
Key Responsibilities:
Act as a Quality and HSE leader ensuring the ongoing identification of hazards and the implementation of controls to manage the associated risks with a special focus on Permit to Work and Isolation procedures.
Promote 100% compliance, all the time with Company Drilling Quality, HSE and Training management systems by all personnel onboard.
Facilitate/Instruct HSE-related courses
Provide administration/support for training on board the rig including maintaining personnel’s training records
Assist in maintaining Quality, HSE and Training bulletin boards updated.
Qualifications & Experience
1st degree or its equivalent
Three years of offshore experience and demonstrated Quality and HSE leadership, or as an alternate three years of Quality and HSE experience in associated industries plus an offshore orientation period to ensure as a minimum the qualification requirements for roustabout and roughneck
Fluent English communication skills (oral and written) and organization skills
Job Summary
The Third Engineer executes preventative/corrective maintenance tasks and ongoing repairs to equipment pertaining to power plant, dynamically positioning and living quarters, and performs watch stander duties
Key Responsibilities:
Executes preventative and corrective maintenance, repairs of hydraulic, pneumatic and mechanical components of;
Power Plant and Auxiliary Systems, Dynamically Positioning Equipment and Auxiliary Systems
HVAC systems, Remote Operated Valve Systems
Ballast and Bilge Systems, Boilers, Incinerator and Auxiliary Systems
Compressed Air Systems and equipment including both Service and Starting Air; Lifeboats and Fast Rescue Craft
Living Quarters and related Support Systems
Emergency Shutdown Systems, Safety Systems and Zero Discharge equipment
Qualifications & Experience
1st degree or its equivalent
A minimum of 2 years of offshore / merchant navy experience, preferably on a dynamically positioned vessel and worked in the position of Third Engineer.
Holds a valid Certificate of Competency with the required qualification and certificates
Job Summary
The Assistant Subsea is predominantly the Trainee of the Subsea Department. He is responsible for conducting rounds and scheduled works and reports to the Senior Subsea Supervisor and the Subsea Supervisor directly
Key Responsibilities:
Conduct inspection, maintenance and repair rounds on all Subsea related equipment.
Maintain the housekeeping onboard to the very high client standards with a particular focus on escape / walking ways to remain clear of any obstruction at all times.
Report all defects to the immediate Supervisor.
Log daily notes and conduct an end of hitch Handover report to their respective relief
Qualifications & Experience
Fluent English communication skills (oral and written).
Two years offshore experience.
Fluent English communication skill both written and oral.
Preferably held the position of either Derrickman or Mechanic previously.
Completion of all mandatory training and certification requirements for Assistant Subsea as necessary
Job Summary
The Mechanic takes the lead in executing the preventative / corrective maintenance and ongoing repairs to Mechanical Drilling Equipment and support Systems.
Key Responsibilities:
Daily checks the condition of areas and equipment, i.e. knuckle boom cranes, mud pumps, draw works, top drive, mud treatment and all drilling related equipment and systems under his responsibility, by making rounds
Inform Chief Mechanic and other department heads of any technical problems or limitations that might affect the safe operation of the vessel.
Ensure that maintenance is planned, organized, supervised and executed in accordance with well programs, Drilling requirements and contractual obligations.
Under all circumstances maintain a minimum amount of spares onboard together with direct supports â€Â for critical/safety/maintenance/operational systems
Maintain workshop equipment and tools to the highest safety standards.
Qualifications & Experience
High School or equivalent with a Mechanical Grade
Minimum 2 years of offshore experience in the position of Mechanic.
Must possess fluent English communication skills (oral and written).
Experienced and trained on hydraulic systems troubleshooting and maintenance
Job Summary
The Electrician will assist the Chief Electrician with preventative maintenance, and on-going maintenance repairs to equipment pertaining to the electrical department.
Key Responsibilities:
Act as a Safety Leader ensuring the ongoing identification of hazards and the implementation of controls to manage the associated risks with a special focus on Permit to Work and Isolation procedures.
Perform maintenance and repair of electrical components for all; drilling equipment (i.e. drilling motors and auxiliaries, Top Drive systems, mud pumps, etc)
Maintain sufficient spares are onboard â€Â together with the Chief Electrician and
Electrical/Electronic Supervisor for critical/safety/maintenance/operational systems with a proâ€Âactive attitude with regards to upcoming Preventive Maintenance System
Maintain workshop equipment/tools to the highest safety standards.
Perform daily visual inspections of equipment; prevent/rectify actual and potential malfunctions, report potentially dangerous conditions to the Chief Electrician
Qualifications & Experience
- High School diploma or equivalent.
- Basic Electrical Knowledge/Skills through work experience and OND Certificate in Electrical Engineering.
- Fluent English communication skills (oral and written)
- Basic Computer Skills
To apply for any of the above positions, please visit www.estymol.com or email your CV to recruitment@estymol.com quoting the job reference number as teh subject of the email.
Build your CV for free. Download in different templates.
Join our happy subscribers
Gmail
Yahoomail