Jobs at Scruples Resources

MAIN FUNCTIONS

• Coordinate day-to-day construction activities to ensure safe, timely, and efficient execution of project work.
• Coordinate activities between Engineering, Construction, QA/QC, HSE, Planning, Procurement, Materials, Commissioning, and other project disciplines.
• Review approved drawings, specifications, method statements, work packs, schedules, and construction procedures to support effective field execution.
• Monitor construction progress against approved project schedules and identify delays, constraints, and potential schedule impacts.
• Coordinate contractors, subcontractors, vendors, and site teams to ensure construction activities are properly planned and executed.
• Ensure required manpower, materials, tools, equipment, and work fronts are available before construction activities commence.
• Coordinate construction interfaces between civil, structural, mechanical, piping, electrical, instrumentation, and other disciplines.
• Monitor contractor performance, productivity, resource utilization, and compliance with project requirements.
• Facilitate daily and weekly construction coordination meetings and track agreed actions to completion.
• Coordinate site access, work permits, work fronts, temporary facilities, logistics, and other requirements necessary for construction execution.
• Review construction work packs and ensure activities are properly sequenced and coordinated with other disciplines.
• Monitor field changes, technical queries, requests for information, and construction-related engineering clarifications.
• Coordinate with Engineering to resolve drawing discrepancies, constructability issues, design changes, and site technical queries.
• Ensure construction activities comply with approved Inspection and Test Plans (ITPs), quality procedures, specifications, and applicable standards.
• Coordinate inspections, testing, punch-list activities, mechanical completion, pre-commissioning, commissioning support, and system handover.
• Ensure all construction activities are performed in accordance with approved Permit-to-Work (PTW), Job Safety Analysis (JSA), risk assessments, and HSE procedures.
• Monitor SIMOPS and construction interfaces to minimize operational and safety risks.
• Track construction deliverables, outstanding work, punch items, and close-out activities.
• Prepare and maintain daily, weekly, and monthly construction progress reports.
• Maintain accurate records of construction status, manpower, materials, equipment, work progress, constraints, and outstanding actions.
• Support progress measurement and provide verified field information to the Planning and Cost Control teams.
• Identify potential risks to cost, schedule, quality, and safety and escalate them to the Construction Manager or Project Manager.
• Coordinate resolution of site issues and ensure corrective actions are implemented within agreed timeframes.
• Support project close-out by coordinating completion documentation, as-built information, inspection records, test certificates, and handover dossiers.
• Promote effective communication, teamwork, quality workmanship, and safe construction practices across all project teams.
• Perform other duties as assigned by the Construction Manager or Project Manager.

QUALIFICATIONS & EXPERIENCE

• Bachelor’s degree or HND in Engineering, Construction Management, Building Technology, or a related discipline.
• Typically 7–10 years of relevant construction/project experience, preferably in oil & gas, petrochemical, energy, marine, or major industrial projects.
• Proven experience coordinating multidisciplinary construction activities and contractor interfaces.
• Good knowledge of construction planning, execution, progress monitoring, and project coordination.
• Ability to interpret engineering drawings, specifications, construction schedules, method statements, and work packs.
• Experience coordinating civil, structural, mechanical, piping, electrical, and instrumentation activities is an advantage.
• Strong understanding of QA/QC requirements, ITPs, inspection processes, punch-list management, and project handover.
• Good knowledge of HSE requirements, including PTW, JSA, risk assessment, SIMOPS, and safe construction practices.
• Experience working with contractors, subcontractors, vendors, and multidisciplinary project teams.
• Strong organizational, communication, coordination, problem-solving, and reporting skills.
• Proficiency in Microsoft Office and familiarity with project management, scheduling, or construction management systems.
• Ability to work effectively in demanding project environments, including remote or offshore locations where required.

go to method of application »

MAIN FUNCTIONS

• Provide field-based technical support for the safe and efficient execution of wellbore construction activities.
• Supervise and monitor drilling operations in accordance with approved drilling programs, well designs, procedures, and company standards.
• Coordinate well construction activities from spud through drilling, casing, cementing, pressure testing, and well handover.
• Monitor drilling parameters, hole conditions, hydraulics, torque and drag, rate of penetration, and other critical wellbore indicators.
• Review and verify drilling programs, casing and cementing programs, BHA designs, well schematics, and operational procedures.
• Monitor hole cleaning, wellbore stability, lost circulation, differential sticking, pack-off, tight hole, and other potential wellbore problems.
• Provide field support for casing, liner, and completion string running operations.
• Monitor cementing operations, including pre-job checks, displacement, pressure testing, cement returns, and post-job evaluation.
• Coordinate with drilling contractors and specialist service companies, including mud engineers, directional drillers, MWD/LWD, wireline, cementing, and logging personnel.
• Ensure well construction activities are performed within approved operational parameters and engineering limits.
• Review real-time drilling and well data and identify trends, abnormal conditions, and opportunities for operational improvement.
• Support well control operations and ensure the integrity and availability of primary and secondary well barriers.
• Participate in well control drills, emergency response activities, and operational risk assessments.
• Troubleshoot wellbore construction challenges and recommend practical corrective actions to minimize non-productive time.
• Conduct pre-job meetings, toolbox talks, operational readiness reviews, and post-job reviews.
• Monitor contractor and service company performance and ensure compliance with approved procedures and contractual requirements.
• Verify that equipment, materials, personnel, and services required for well construction activities are available and fit for purpose.
• Ensure accurate preparation and maintenance of daily drilling reports, well construction records, service reports, and technical documentation.
• Participate in well integrity reviews, well suspension, abandonment, completion, and handover activities as required.
• Identify lessons learned and recommend improvements to well construction practices, procedures, and future well programs.
• Ensure all field activities comply with company HSE requirements, environmental standards, permit-to-work procedures, and applicable regulatory requirements.
• Support continuous improvement initiatives aimed at improving drilling performance, wellbore quality, safety, and cost efficiency.
• Perform other duties as assigned by the Drilling or Well Construction Manager.

QUALIFICATIONS & EXPERIENCE

• Bachelor’s degree or HND in Petroleum Engineering, Drilling Engineering, Mechanical Engineering, or a related discipline.
• 7–10 years of relevant experience in drilling, well construction, or well engineering, with substantial field-based experience.
• Experience in offshore, deepwater, or complex well construction operations is highly desirable.
• Strong knowledge of drilling operations, wellbore stability, hydraulics, casing, cementing, well control, and well integrity.
• Experience coordinating multiple oilfield service companies and drilling contractors.
• Ability to interpret drilling programs, well schematics, casing designs, cementing programs, BHA designs, and drilling reports.
• Knowledge of API, ISO, IADC, IWCF, and applicable company well construction standards.
• Valid IWCF or IADC Well Control certification where required.
• Strong knowledge of HSE, risk assessment, PTW, SIMOPS, and emergency response requirements.
• Good analytical, troubleshooting, leadership, communication, and decision-making skills.
• Proficiency in Microsoft Office and relevant drilling/well monitoring software.

go to method of application »

MAIN FUNCTIONS

• Develop, review, and approve mechanical engineering designs for oil & gas, petrochemical, industrial, and infrastructure projects.
• Prepare mechanical design calculations, equipment specifications, datasheets, layouts, and technical documentation in accordance with project requirements.
• Design and engineer mechanical systems, equipment, piping interfaces, and associated facilities based on approved project specifications and applicable codes and standards.
• Review mechanical design inputs, project specifications, client requirements, process data, and engineering deliverables to establish design criteria.
• Develop and review equipment layouts, general arrangements, mechanical drawings, piping arrangements, and installation details.
• Perform mechanical calculations including equipment sizing, pressure and temperature requirements, loads, stresses, hydraulic considerations, and other design parameters as applicable.
• Prepare and review technical specifications and datasheets for static equipment, rotating equipment, packages, tanks, vessels, pumps, compressors, heat exchangers, and other mechanical systems.
• Review vendor drawings, calculations, data sheets, and technical submissions to verify compliance with project requirements.
• Coordinate mechanical design activities with Process, Piping, Civil/Structural, Electrical, Instrumentation, Materials, and other engineering disciplines.
• Identify and resolve interdisciplinary design clashes, interface issues, and constructability constraints.
• Conduct design reviews, technical evaluations, value engineering studies, and constructability assessments.
• Ensure mechanical designs comply with applicable codes, standards, regulations, and client specifications, including ASME, API, ASTM, ISO, and relevant project standards.
• Provide technical guidance and mentoring to junior and intermediate mechanical engineers and designers.
• Lead or participate in technical meetings with clients, contractors, vendors, and multidisciplinary engineering teams.
• Review engineering calculations, drawings, specifications, material requisitions, purchase requisitions, and other mechanical deliverables for technical accuracy.
• Provide engineering support during procurement, fabrication, construction, installation, testing, commissioning, and start-up activities.
• Respond to technical queries, Requests for Information (RFIs), site queries, and requests for design clarification.
• Investigate design-related problems and develop technically sound and cost-effective solutions.
• Participate in HAZID, HAZOP, design reviews, SIL-related activities where applicable, risk assessments, and other project technical reviews.
• Ensure all engineering deliverables are produced in accordance with approved project schedules, quality requirements, document control procedures, and engineering standards.
• Monitor design progress and coordinate deliverables to ensure engineering milestones are achieved.
• Review as-built documentation and incorporate approved field changes into final engineering deliverables.
• Support preparation of technical reports, engineering studies, design basis documents, calculations, and project specifications.
• Identify opportunities to improve equipment reliability, maintainability, safety, constructability, and lifecycle cost.
• Ensure engineering activities comply with company HSE policies and applicable statutory and regulatory requirements.
• Perform other duties as assigned by the Lead Mechanical Engineer or Engineering Manager.

QUALIFICATIONS & EXPERIENCE

• Bachelor’s degree in Mechanical Engineering or a closely related engineering discipline.
• Typically 8–12 years of relevant mechanical engineering/design experience, preferably within oil & gas, petrochemical, energy, or major industrial projects.
• Proven experience delivering mechanical engineering and design packages for complex projects.
• Strong knowledge of mechanical equipment design, equipment specification, layouts, mechanical systems, and engineering calculations.
• Experience with static and rotating equipment, including pressure vessels, heat exchangers, pumps, compressors, tanks, and packaged equipment.
• Strong understanding of mechanical design codes and standards, including ASME, API, ASTM, ISO, and applicable client/company standards.
• Experience reviewing vendor documentation, equipment datasheets, drawings, calculations, and technical bids.
• Ability to interpret and produce mechanical drawings, equipment layouts, general arrangements, and design documentation.
• Experience working within multidisciplinary engineering teams and coordinating mechanical interfaces with piping, process, civil/structural, electrical, and instrumentation disciplines.
• Strong understanding of constructability, fabrication, installation, commissioning, and maintenance requirements.
• Proficiency in relevant engineering and design software such as AutoCAD, SolidWorks, Plant 3D, Navisworks, or equivalent tools, depending on project requirements.
• Strong analytical, technical writing, problem-solving, communication, and leadership skills.
• Ability to review and approve technical deliverables and provide mentorship to less-experienced engineers.
• Professional engineering registration or membership with a recognized engineering institution is an advantage.

go to method of application »

MAIN FUNCTIONS

• Develop and prepare construction methodologies, execution strategies, and work procedures for project activities.
• Review engineering drawings, specifications, project schedules, and site conditions to determine safe and efficient construction methods.
• Develop detailed method statements, work packs, construction sequences, and execution plans for assigned construction activities.
• Evaluate constructability of engineering designs and identify potential construction constraints, risks, and interface issues.
• Provide technical support to construction teams during project execution and resolve methodology-related site issues.
• Coordinate with Engineering, Construction, Planning, QA/QC, HSE, Procurement, Materials, and Commissioning teams to ensure construction methods are properly integrated with project requirements.
• Develop construction sequences and work methodologies that optimize productivity, resource utilization, safety, quality, and schedule performance.
• Review proposed construction methods submitted by contractors and provide technical comments and recommendations.
• Ensure construction methodologies comply with approved engineering designs, project specifications, applicable codes, standards, and company procedures.
• Develop lifting, installation, erection, temporary works, access, handling, and logistics methodologies where applicable.
• Assess requirements for construction equipment, tools, temporary facilities, manpower, materials, and specialist services.
• Identify potential construction risks and develop appropriate mitigation and contingency measures.
• Participate in constructability reviews, HAZID/HAZOP sessions, risk assessments, design reviews, and construction readiness assessments.
• Provide input into project planning and scheduling by establishing logical construction sequences, activity durations, and required work fronts.
• Review construction work packs to ensure they contain the necessary drawings, procedures, permits, inspection requirements, and technical information.
• Coordinate construction interfaces between different disciplines and ensure work sequences minimize clashes and rework.
• Monitor field execution to verify that approved construction methodologies are being followed and identify opportunities for improvement.
• Investigate deviations from approved methods and recommend corrective actions or revised methodologies where required.
• Support the preparation of technical queries, Requests for Information (RFIs), field change requests, and engineering clarifications.
• Ensure construction methods adequately address quality control, inspection, testing, environmental, and HSE requirements.
• Participate in pre-construction meetings, contractor coordination meetings, toolbox discussions, and technical reviews.
• Maintain controlled records of method statements, procedures, technical calculations, revisions, approvals, and lessons learned.
• Support continuous improvement by capturing lessons learned and developing more effective construction methodologies for future projects.
• Perform other duties as assigned by the Construction Manager, Engineering Manager, or Project Manager.

QUALIFICATIONS & EXPERIENCE

• Bachelor’s degree or HND in Civil Engineering, Mechanical Engineering, Structural Engineering, Construction Engineering, or a related discipline.
• Typically 5–8 years of relevant construction engineering or methods engineering experience, preferably in oil & gas, petrochemical, energy, marine, or major infrastructure projects.
• Proven experience developing construction methodologies, method statements, work packs, and execution plans.
• Strong understanding of construction engineering principles, sequencing, temporary works, installation methods, and constructability.
• Experience reviewing engineering drawings, specifications, construction schedules, and contractor proposals.
• Ability to develop practical and safe construction solutions for complex site activities.
• Knowledge of construction planning, resource estimation, productivity, and work-front management.
• Familiarity with relevant ASME, API, ASTM, ACI, AWS, ISO, and project-specific standards as applicable.
• Strong knowledge of HSE requirements, risk assessment, PTW, lifting operations, SIMOPS, and safe construction practices.
• Experience working with multidisciplinary engineering and construction teams.
• Strong analytical, technical writing, problem-solving, communication, and coordination skills.
• Proficiency in Microsoft Office, AutoCAD, and relevant engineering/project management software.
• Professional engineering certification or membership of a recognized engineering body is an advantage.

go to method of application »

MAIN FUNCTIONS

• Supervise and coordinate mechanical construction activities in accordance with approved drawings, specifications, schedules, procedures, and project requirements.
• Coordinate daily mechanical construction activities involving equipment installation, piping, mechanical systems, rotating equipment, static equipment, and associated facilities.
• Review mechanical drawings, specifications, method statements, work packs, and construction procedures before commencement of work.
• Supervise installation, alignment, leveling, grouting, and commissioning preparation of static and rotating equipment.
• Monitor installation of pumps, compressors, turbines, generators, pressure vessels, heat exchangers, tanks, valves, and other mechanical equipment.
• Supervise piping fabrication and installation, including pipe supports, valves, flanges, fittings, pressure testing, flushing, and reinstatement.
• Ensure mechanical equipment and piping installations conform to approved engineering drawings, specifications, tolerances, and manufacturer requirements.
• Coordinate with civil, structural, electrical, instrumentation, QA/QC, HSE, commissioning, and engineering teams to resolve construction interfaces and site issues.
• Monitor contractor and subcontractor performance, productivity, manpower, equipment utilization, and work quality.
• Verify that materials and equipment are available, correctly identified, inspected, and properly stored before installation.
• Ensure proper implementation of Inspection and Test Plans (ITPs), quality procedures, inspection requirements, and approved construction work packs.
• Coordinate mechanical inspections, testing, punch-list activities, mechanical completion, and system handover.
• Supervise hydrostatic and pneumatic testing, pressure testing, flushing, cleaning, leak testing, and reinstatement activities as applicable.
• Ensure equipment alignment, shaft alignment, bolt torquing, flange management, welding support, and other critical mechanical activities are properly controlled.
• Monitor preservation requirements for installed and completed mechanical equipment.
• Identify construction constraints, technical issues, design discrepancies, and field changes and coordinate timely resolution.
• Monitor construction progress against approved schedules and provide accurate progress updates to the Construction Manager.
• Participate in daily coordination meetings, construction planning meetings, toolbox talks, and pre-job meetings.
• Ensure all mechanical construction activities comply with approved Permit-to-Work (PTW), Job Safety Analysis (JSA), risk assessments, lifting plans, and safe work procedures.
• Conduct regular site inspections to identify unsafe conditions, quality deficiencies, and deviations from approved requirements.
• Maintain accurate records of daily activities, manpower, equipment, materials, inspections, testing, progress, and outstanding work.
• Support pre-commissioning, commissioning, start-up, mechanical completion, and final project handover activities.
• Ensure completed mechanical systems are properly documented and handed over with all relevant drawings, inspection records, test certificates, and completion dossiers.
• Promote continuous improvement, safe working practices, quality workmanship, and efficient use of project resources.
• Perform other duties as assigned by the Construction Manager or Project Manager.

QUALIFICATIONS & EXPERIENCE

• Bachelor’s degree or HND in Mechanical Engineering, Mechanical Technology, or a related discipline.
• Typically 8–10 years of relevant mechanical construction experience, preferably within oil & gas, petrochemical, power, marine, or other industrial projects.
• Proven experience supervising mechanical equipment, piping, fabrication, installation, testing, and commissioning activities.
• Strong knowledge of mechanical construction methods, piping systems, rotating and static equipment, equipment alignment, and pressure testing.
• Ability to read and interpret P&IDs, mechanical drawings, isometrics, equipment drawings, plot plans, and construction work packs.
• Knowledge of applicable codes and standards such as ASME, API, AWS, and relevant project specifications.
• Experience coordinating contractors, subcontractors, vendors, and multidisciplinary site teams.
• Good understanding of QA/QC requirements, ITPs, inspection procedures, punch-list management, and mechanical completion.
• Strong knowledge of HSE requirements, including PTW, JSA, risk assessments, lifting operations, confined-space work, and SIMOPS.
• Strong leadership, communication, coordination, troubleshooting, and problem-solving skills.
• Proficiency in Microsoft Office and familiarity with construction/project management systems.
• Ability to work effectively in demanding site environments, including offshore or remote locations where required.

go to method of application »

MAIN FUNCTIONS

• Provide field-based technical support for the safe and efficient execution of wellbore construction activities.
• Supervise and monitor drilling operations in accordance with approved drilling programs, well designs, procedures, and company standards.
• Coordinate well construction activities from spud through drilling, casing, cementing, pressure testing, and well handover.
• Monitor drilling parameters, hole conditions, hydraulics, torque and drag, rate of penetration, and other critical wellbore indicators.
• Review and verify drilling programs, casing and cementing programs, BHA designs, well schematics, and operational procedures.
• Monitor hole cleaning, wellbore stability, lost circulation, differential sticking, pack-off, tight hole, and other potential wellbore problems.
• Provide field support for casing, liner, and completion string running operations.
• Monitor cementing operations, including pre-job checks, displacement, pressure testing, cement returns, and post-job evaluation.
• Coordinate with drilling contractors and specialist service companies, including mud engineers, directional drillers, MWD/LWD, wireline, cementing, and logging personnel.
• Ensure well construction activities are performed within approved operational parameters and engineering limits.
• Review real-time drilling and well data and identify trends, abnormal conditions, and opportunities for operational improvement.
• Support well control operations and ensure the integrity and availability of primary and secondary well barriers.
• Participate in well control drills, emergency response activities, and operational risk assessments.
• Troubleshoot wellbore construction challenges and recommend practical corrective actions to minimize non-productive time.
• Conduct pre-job meetings, toolbox talks, operational readiness reviews, and post-job reviews.
• Monitor contractor and service company performance and ensure compliance with approved procedures and contractual requirements.
• Verify that equipment, materials, personnel, and services required for well construction activities are available and fit for purpose.
• Ensure accurate preparation and maintenance of daily drilling reports, well construction records, service reports, and technical documentation.
• Participate in well integrity reviews, well suspension, abandonment, completion, and handover activities as required.
• Identify lessons learned and recommend improvements to well construction practices, procedures, and future well programs.
• Ensure all field activities comply with company HSE requirements, environmental standards, permit-to-work procedures, and applicable regulatory requirements.
• Support continuous improvement initiatives aimed at improving drilling performance, wellbore quality, safety, and cost efficiency.
• Perform other duties as assigned by the Drilling or Well Construction Manager.

QUALIFICATIONS & EXPERIENCE

• Bachelor’s degree or HND in Petroleum Engineering, Drilling Engineering, Mechanical Engineering, or a related discipline.
• 7–10 years of relevant experience in drilling, well construction, or well engineering, with substantial field-based experience.
• Experience in offshore, deepwater, or complex well construction operations is highly desirable.
• Strong knowledge of drilling operations, wellbore stability, hydraulics, casing, cementing, well control, and well integrity.
• Experience coordinating multiple oilfield service companies and drilling contractors.
• Ability to interpret drilling programs, well schematics, casing designs, cementing programs, BHA designs, and drilling reports.
• Knowledge of API, ISO, IADC, IWCF, and applicable company well construction standards.
• Valid IWCF or IADC Well Control certification where required.
• Strong knowledge of HSE, risk assessment, PTW, SIMOPS, and emergency response requirements.
• Good analytical, troubleshooting, leadership, communication, and decision-making skills.
• Proficiency in Microsoft Office and relevant drilling/well monitoring software.

go to method of application »

MAIN FUNCTIONS

• Provide field-based technical support and supervision for wellbore construction activities from well planning through drilling, casing, cementing, completion, and well handover.
• Monitor well construction operations to ensure activities are executed safely, efficiently, and in accordance with approved programs, procedures, and industry standards.
• Review drilling programs, well schematics, casing designs, cementing programs, drilling parameters, and other well construction documentation.
• Coordinate with drilling, completions, subsurface, production, well services, and rig teams to ensure effective execution of well construction activities.
• Monitor drilling operations, including hole section preparation, drilling parameters, directional drilling, wellbore stability, hole cleaning, and formation evaluation.
• Provide technical input on casing and liner running, cementing, pressure testing, wellhead installation, and related well integrity activities.
• Monitor wellbore conditions and identify potential risks such as lost circulation, kicks, wellbore instability, differential sticking, pack-off, tight hole, and other drilling challenges.
• Review real-time drilling and well data to identify trends, operational issues, and opportunities for improved well performance.
• Verify that drilling and well construction activities remain within approved operational limits and engineering requirements.
• Coordinate with directional drilling, mud logging, MWD/LWD, cementing, logging, and other specialist service companies.
• Support troubleshooting of well construction problems and recommend appropriate corrective actions.
• Ensure proper implementation of well control procedures and participate in well control and emergency response activities as required.
• Monitor compliance with well control barriers, pressure control requirements, and well integrity standards.
• Review daily drilling reports, morning reports, end-of-well reports, service reports, and other operational documentation for accuracy and completeness.
• Maintain accurate records of well construction activities, operational parameters, lessons learned, non-conformances, and technical issues.
• Participate in pre-spud meetings, operational readiness reviews, risk assessments, toolbox talks, and well construction planning sessions.
• Ensure field activities comply with company HSE requirements, permit-to-work procedures, environmental standards, and applicable regulatory requirements.
• Monitor contractor and service company performance and ensure work is carried out in accordance with approved procedures and contractual requirements.
• Identify opportunities to optimize drilling performance, reduce non-productive time, improve wellbore quality, and minimize operational risks.
• Provide technical support during well suspension, temporary abandonment, completion, and final well handover activities.
• Participate in post-well reviews and provide recommendations for improving future well construction programs.
• Perform other duties as assigned by the Well Construction Manager or Drilling Superintendent.

QUALIFICATIONS & EXPERIENCE

• Bachelor’s degree or HND in Petroleum Engineering, Drilling Engineering, Mechanical Engineering, or a related discipline.
• Typically 7–10 years of relevant oil & gas well construction or drilling experience, preferably with significant field-based experience.
• Proven experience supporting or supervising drilling and well construction operations, preferably on offshore, deepwater, or complex wells.
• Strong knowledge of drilling engineering principles, wellbore construction, casing and cementing, well control, and well integrity.
• Experience working with drilling contractors, directional drilling, MWD/LWD, mud engineering, cementing, wireline, and other well services.
• Ability to interpret drilling programs, well schematics, casing designs, cementing programs, BHA designs, and drilling reports.
• Knowledge of well control standards and practices, including IWCF or IADC certification where required.
• Familiarity with applicable API, ISO, IADC, IWCF, and company well construction standards.
• Strong understanding of HSE, risk management, PTW, SIMOPS, and offshore/field operating requirements.
• Good analytical, troubleshooting, communication, and decision-making skills.
• Proficiency in Microsoft Office and relevant drilling/well engineering software or real-time well monitoring systems.