• Jobs at Hobark International Limited (HIL) - 16 Positions

  • Posted on: 5 August, 2016 Deadline: Not Specified
  • View Jobs in Oil and Gas / Marine View All Jobs at Hobark International Limited (HIL)
  • Subscribe to free job alerts
  • Hobark International Limited (HIL) is an Integrated Services Company whose subsidiaries: DrillPet International Limited (DIL), Uniterm Nigeria Limited (UNL), UltiProc Nigeria Limited (UPNL), Hobark Consultant Management Services (HCMS) and Gigasecprovide Manpower Services & Logistics Support, Drilling Operations and Consultancy Services, On/OffShore Catering Services, Drilling Rigs & Drilling Bits and Procurement Services to the Oil & Gas Industry, IP security services.

    Rope Access Foreman/L3

     

    Job Description

    • Responsible for the health, safety and welfare of his team.
    • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on scaffolding operations placed under his responsibility
    • Manages day to day activities within his specific discipline
    • Provides technical knowledge, expertise and supervision for Rope Access activities
    • Verifies that all procedures, specifications, standards and legislation are followed
    • Ensures works preparation before site works performance (risk assessment, techniques to be applied, rescue preparation, equipments preparation, checking/testing, backup devices, definition of anchors systems and points, rope and slings protection, lifelines when required, … )
    • Follows performance of works on site (respect of rules, specifications, regulations and best practices)
    • Responsible of QA/QC for his discipline
    • Proposes alternatives to complex interventions
    • Have a comprehensive knowledge of advanced rescue techniques and participate, with his team, to first aid operations Akpo Fabric Maintenance Service Page 33 of 35
    • Be able to give assistance for painting, piping, NDT inspection to other relevant disciplines when access to equipment/installation is complex
    • Check intervention reports in and write the technical reports related to his activity field
    • Assists the planning team by giving any technical support for preparation of the jobs
    • In charge to manage, monitor and maintain the welding products & materials stored on site and ensures that all of these products & materials are in good conditions and free from defects – Replaces the unusable materials
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
    • Manages the specific team of technicians (IRATA level 1 & 2) If requested, identify additional resources
    • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.
    • Ensures that all daily, weekly and monthly reports are completed as required.
    • Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
    • Where required, assists with methods support and return information to the relevant representative.
    • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
    • Ensures awareness with KPI requirements
    • Ensures that all members of his team have the relevant qualifications and certificates to performed the required works through a specific register (with qualification matrix and relevant certificates dedicated to each workers)
    • Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.

    Qualifications
    The holder of this position must have the following qualifications:

    • Bachelor/ College Degree
    • IRATA level 3 mandatory
    • At least 5 to 10 years of experience in rope access supervision
    • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
    • Experience and knowledge of painting and NDT inspection operations with related QA/QC aspects and qualifications when required
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Drilling Operations, Engineering, EPC, Oil & Gas, Operations, Production.

    Certified Welder

     

    Job Description

    • Shall be responsible for the pre-inspection of the welding Machine and its accessories prior to usage.
    • Shall ensure that the work place is safe, fit for all hot work activities.
    • Shall be able to interpret an approved PQR/WPS
    • Shall carry out Welding Operation in accordance to the quality requirements for the scope and PQR/WPS.
    • Shall be conversant with basic ethics aimed at controlling quality of works
    • Manages day to day activities within his specific discipline
    • Verifies that all procedures, specifications and standards are followed
    • Follows performance of works on site (respect of specification and best practices)
    • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
    • In charge to manage, monitor and maintain the welding products & materials stored on site and ensures that all of these products & materials are in good conditions and free from defects - Replaces the unusable materials
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
    • Ensures that day to day requirements are met with regards Scope,
    • Tool and means and onsite risk assessments.
    • Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
    • Shall be responsible for the pre-inspection of the welding Machine and its accessories prior to usage.

    Requirements
    The holder of this position must have the following qualifications:

    • Diploma holder with ASME/API code qualification (WQT)
    • At least five years experience as a pipe/structural welder in the oil and gas industry.
    • Experience in Offshore construction, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production Industry preferably on an FPSO.
    • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
    • Shall be in involved in ensuring safety of self and others on site
    • Shall be conversant with basic ethics aimed at controlling quality of works
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills:

    • Oil & Gas, Operations, Engineering, EPC, Production

    Piping/Structural Works Foreman

     

    Job Description
    Responsible for the health, safety and welfare of his team.

    • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on scaffolding operations placed under his responsibility
    • Manages day to day activities within his specific discipline
    • Provides technical knowledge, expertise and supervision for welding, cutting and rigging
    • Verifies that all procedures, specifications and standards are followed
    • Ensures works preparation before site works performance (survey, isometrics verifications, materials/tools preparation/supplies, access, lifting, prefabrications, logistics…)
    • Follows performance of works on site (respect of specification and best practices)
    • Responsible of QA/QC for his discipline
    • Inspects the performed works or follows inspection done by COMPANY
    • Manages interventions using the CMMS and check intervention reports in this CMMS and write the technical reports related to his activity field
    • Assists the planning team by giving any technical support for Akpo Fabric Maintenance preparation of the jobs in his discipline
    • In charge to manage, monitor and maintain the welding products & materials stored on site and ensures that all of these products & materials are in good conditions and free from defects – Replaces the unusable materials
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
    • Manages the specific team of technicians (welders, fitters, riggers …) within your discipline.
    • If requested, identify additional resources
    • Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
    • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.
    • Ensures that all daily, weekly and monthly reports are completed as required.
    • Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
    • Ensures that any faulty or damaged equipment is quarantined and details are reported
    • Where required, assists with methods support and return information to the relevant representative.
    • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
    • Ensures awareness with KPI requirements
    • Ensure that all members of the team are focused on delivery of HSE and Quality plans.
    • Ensures that all workers have the relevant qualifications and certificates to performed the required works through a specific register (with qualification matrix and relevant certificates dedicated to each workers)
    • Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
    • When existing in charge to manage the dedicated piping workshop (cleaning, materials/tools states , welding products/consumables storage, personnel individual means, protection, ...)

    Requirements
    The holder of this position must have the following qualifications:

    • Bachelor/ College Degree
    • At least 5 to 10 years of experience in manufacturing, fabrication, welding and cutting
    • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
    • Experience and knowledge of metallurgy, welding procedure & specifications, and QA/QC related to his discipline Akpo Fabric Maintenance Service
    • Specific professional knowledge: CMMS : SAP/R3,
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills:

    • Engineering, EPC, Drilling Operations, Oil & Gas, Operations, Production

    Painting/Blasting Foreman

     

    Job Description

    • Responsible for the health, safety and welfare of his team
    • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating
    • procedures and standard industry practice during performance on painting operations placed under his responsibility
    • Manages day to day activities within his specific discipline (scheduling, personnel assignment, material management…)
    • Responsible for respect of blasting and painting/coating specifications
    • Applies and verifies the surface preparation following relevant specifications and best practices
    • Provides technical knowledge, expertise and supervision of blasting and painting operations
    • Verifies that all procedures, specifications and standards are followed
    • Inspects surface preparation before painting operations
    • Inspects painting products application in term of QA/QC (in particular
    • verifies type of products applied and relevant thickness- wet & dry)
    • Manages interventions using the CMMS and check intervention reports in this CMMS and write the technical reports related to his activity field
    • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
    • In charge to manage, monitor and maintain the painting products materials stored on site and ensures that all painting products and materials are stored in good conditions and free from defects – Replaces Akpo Fabric Maintenance the unusable materials
    • In charge to update and maintain on site painting products/material register.
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
    • If requested, identify resource requirements and deploy as necessary to safely liquidate specific scopes of work.
    • Ensures that day to day requirements are met with regards to Scope, specifications and best practices,
    • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation. .
    • Ensures that all daily, weekly and monthly reports are completed as required.
    • Ensures that plant, equipment and materials stocks are monitored, and
    • all required certification is in place.
    • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
    • Ensures that any faulty or damaged equipment is quarantined and details are reported
    • Where required, assists with methods support and return information to the relevant representative.
    • Ensures awareness with KPI requirements
    • Ensure that all members of the team are focused on delivery of HSE and Quality plans.
    • Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma and/or Degree holder
    • At least 5 to 10 years of experience in blasting/painting activities in industrial context
    • NACE 2 certification or equivalent AQCPA - FROSIO
    • Experience in oil and gas industry to have knowledge of the specific environment linked to HSE aspects
    • Specific professional knowledge: CMMS : SAP/R3,
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    HSE/Fire Watch

     

    Job Description

    • Shall be responsible to manage and coordinate the HSE activities on site.
    • Shall be responsible to develop and prepare Job Safety Analysis in conjunction with work teams and Works leader.
    • Manage HSE Induction for personnel on arrival to Platform
    • Shall champion ANOMALY reporting and analysis from work team.

    Activities

    • Shall be responsible to watch and take necessary precaution before, during and after any hot work (welding).
    • Shall make available necessary fire preventive accessories in any welding workplace.
    • Shall be a Safety guard during any welding operation.
    • Shall make report of any anomaly observed to the HSE Officer.
    • Manages day to day activities within his specific discipline
    • Verifies that all procedures, specifications and standards are followed
    • Follows performance of works on site (respect of specification and best practices)
    • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
    • Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
    • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
    • Ensures awareness with KPI requirements
    • Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
    • Shall ensure that the work place is safe, fit for all hot work activities.

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma holder and must be computer literate
    • Basic Fire fighting Awareness training
    • Experience in Offshore construction, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production
    • Industry preferably on an FPSO.
    • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
    • Shall be conversant with basic ethics aimed at controlling quality of works
    • Shall be in involved in ensuring safety of self and others on site
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage.

    Primary Skills:

    • EPC, Engineering, Oil & Gas, Production.

    Painter/Blaster

     

    Job Description

    • Carry out all painting, blasting, passivation and insulation work.
    • General Maintenance.

    Activities:

    • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on painting operations placed under his responsibility
    • Responsible of respect of blasting and painting/coating specifications
    • Applies and verifies the surface preparation following relevant specifications and best practices
    • Provides technical knowledge, expertise and supervision blasting and painting operations
    • Verifies that all procedures, specifications and standards are followed
    • Inspects surface preparation before painting operations
    • Inspects painting products application in term of QA/QC (in particular verifies type of products applied and relevant thickness- wet & dry)
    • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
    • Check equipment calibration
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
    • Manages the specific team of technicians within your discipline.
    • If requested, identify resource requirements and deploy as necessary to safely liquidate specific scopes of work.
    • Ensures that day to day requirements are met with regards to Scope, specifications and best practices,
    • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma holder
    • At least 3 years of experience in blasting/painting activities in industrial context
    • NACE 1 certification or equivalent AQCPA - FROSIO is an advantage
    • Experience in oil and gas industry to have knowledge of the specific environment linked to HSE aspects
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Completions Engineer, Engineering, EPC, Oil & Gas, Production.

    Scaffolding Foreman

     

    Job Description

    • Responsible for the health, safety and welfare of his team.
    • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on scaffolding operations placed under his responsibility
    • Manages day to day activities within his specific discipline
    • Responsible of design & calculation of scaffold to be erected following location, loads ...
    • Provides technical knowledge, expertise and supervision for erecting, dismantling, of scaffolds
    • Verifies that all procedures, specifications and standards are followed
    • Inspects scaffolding erection prior use
    • Manages interventions using the CMMS and check intervention reports in this CMMS and write the technical reports related to his activity field
    • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
    • In charge to manage, monitor and maintain the scaffolding materials stored on site and ensures that all scaffold materials are in good conditions and free from defects – Replaces the unusable materials
    • In charge to update and maintain on site scaffolding register.
    • Ensures that the operations planned work scope is managed effectively
    • Akpo Fabric Maintenance Service Page 13 of 35

    Service Description

    • In accordance with agreed targets to avoid disruption.
    • Manages the specific team of technicians within your discipline.
    • If requested, identify resource requirements and deploy as necessary to safely liquidate specific scopes of work.
    • Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
    • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.
    • Ensures that all daily, weekly and monthly reports are completed as required.
    • Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
    • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
    • Ensures that any faulty or damaged equipment is quarantined and details are reported
    • Where required, assists with methods support and return information to the relevant representative.
    • Ensures awareness with KPI requirements
    • Ensure that all members of the team are focused on delivery of HSE and Quality plans.
    • Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.

    Qualifications
    The holder of this position must have the following qualifications:

    • Bachelor/ College Degree
    • At least 5 to 10 years of experience in scaffolding activities in industrial context
    • With relevant scaffold professional qualification certificates (like Basic Part 1, Basic Part 2, Scaffolding inspector,...) delivered by accredited organization
    • Experience in oil and gas industry to have knowledge of the specific environment linked to HSE aspects
    • Capabilities to design & calculate scaffold following location, loads ...
    • Specific professional knowledge: CMMS : SAP/R3,
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage.

    Primary Skills:

    • E&I COMMISSIONING, Engineering, EPC, Oil & Gas, Production.

    Mechanical Fitter

     

    Job Description

    • Take measurements and fabricate according to the designs.
    • Read and interpret details from Isometric drawings, GAs P&IDs, Pipe Support drawings etc.
    • Identify piping materials and fittings
    • Complete joint preparation based on approved PQR/WPS
    • Responsible to arrange and organize relevant materials and accessories for proper fit-up and fabrication.
    • Manages day to day activities within his specific discipline
    • Verifies that all procedures, specifications and standards are followed
    • Follows performance of works on site (respect of specification and best practices)
    • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
    • Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
    • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
    • Ensures awareness with KPI requirements
    • Plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
    • Shall ensure that the work place is safe, fit for all hot work activities.
    • Shall be able to interpret an approved PQR/WPS
    • Shall be conversant with basic ethics aimed at controlling quality of works
    • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma holder with ASME/API code qualification (WQT)
    • At least five years experience as a pipe/structural fitter in the oil and gas industry.
    • Experience in Offshore construction, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production Industry preferably on an FPSO.
    • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
    • Shall be able to read and interpret details from Isometric drawings, GAs P&IDs, Pipe Support drawings etc.
    • Shall be able to identify piping materials and fittings
    • Shall be able to complete joint preparation based on approved PQR/WPS
    • Shall be responsible to arrange and organize relevant materials and accessories for proper fit-up and fabrication.
    • Shall be able to take Measurements and fabricate according to the designs.
    • Shall be conversant with basic ethics aimed at controlling quality of works
    • Shall be in involved in ensuring safety of self and others on site
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Completions Engineer, Engineering, EPC, Operations, Oil & Gas, Production

    Painter/Blaster L1/L2

     

    Job Description

    • Participate in the construction quality control functions/activities related to painting discipline at height.
    • Participates in Inspection operations.
    • Ensures the correct application of the Inspection Test Plan.
    • Checking the suitability of protective gears and precautionary measures.
    • Regulatory inspection of Risers and integrity of jacket structure.
    • Corrosion control at heights
    • Rigging rescue systems for tanks and any confined space works.

    Activities:

    • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on painting operations placed under his responsibility
    • Responsible of respect of blasting and painting/coating specifications
    • Applies and verifies the surface preparation following relevant specifications and best practices
    • Provides technical knowledge, expertise and supervision blasting and painting operations
    • Verifies that all procedures, specifications and standards are followed
    • Inspects surface preparation before painting operations
    • Inspects painting products application in term of QA/QC (in particular verifies type of products applied and relevant thickness- wet & dry)
    • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
    • Check equipment calibration
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
    • Manages the specific team of technicians within your discipline.

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma holder
    • At least 5 years of experience in blasting/painting activities in industrial context
    • NACE 1 or 2 certification or equivalent AQCPA - FROSIO
    • Experience in oil and gas industry to have knowledge of the specific environment linked to HSE aspects
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Completions Engineer, E&I COMMISSIONING, EPC, Engineering, Oil & Gas, Operations, Production

    Painter/Blaster L3

     

    Job Description

    • Supervises the construction quality control functions/activities related to painting discipline at height.
    • Supervises activities carried out by RA Level 1 & 2 as required.
    • Supervises Inspection operations.
    • Ensures the correct application of the Inspection Test Plan.
    • Checking the suitability of protective gears and precautionary measures.
    • Regulatory inspection of Risers and integrity of jacket structure.
    • Corrosion control at heights
    • Rigging rescue systems for tanks and any confined space works.
    • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on painting operations placed under his responsibility
    • Responsible of respect of blasting and painting/coating specifications
    • Applies and verifies the surface preparation following relevant specifications and best practices
    • Provides technical knowledge, expertise and supervision blasting and painting operations
    • Verifies that all procedures, specifications and standards are followed
    • Inspects surface preparation before painting operations
    • Inspects painting products application in term of QA/QC (in particular verifies type of products applied and relevant thickness- wet & dry)
    • Assists the planning team by giving any technical support for preparation of the jobs in his discipline
    • Check equipment calibration
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma and/or Degree holder
    • At least 5 to 10 years of experience in blasting/painting activities in industrial context
    • NACE Level 2 certification or equivalent AQCPA - FROSIO
    • Experience in oil and gas industry to have knowledge of the specific environment linked to HSE aspects
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Engineering, EPC, Completions Engineer, Oil & Gas, Operations, Production

    Pipe Rigger

     

    Job Description

    • Achieves lifting activities offshore on schedule and according to HSE regulations.
    • Ensures effective and timely response to construction activity and ensure compliance with company procedures.
    • Ensures that activities performed on site in the project perimeter fulfill project HSE requirements.
    • Carries out all lifting operations activities required for the successful delivery of the Contracts assigned.
    • Shall be responsible to arrange and organize relevant materials and accessories from lay down area to work location.
    • Shall be involved in fit-up and fabrication activities.
    • Shall be conversant with basic ethics aimed at controlling quality of works
    • To cross check all materials needed for fabrication with the Material Controller.
    • Liaising with Site Lifting Specialist on a day to day basis for all lifting operations.
    • Reports any incident as per Company and Project rules.
    • Participates in Job Hazard Analyses and Attend safety toolbox meetings on a daily basis with contractors' work teams.
    • Any other work of a similar nature as may be requested by his hierarchy

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma holder
    • Experience in Offshore construction, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production Industry preferably on an FPSO.
    • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
    • Shall be able to recognize basic rigging signs and symbols.
    • Shall be able to identify basic rigging gears and its operability
    • Shall be able to carry out basic fastening techniques for lifting and load transfer.
    • Shall be responsible to arrange and organize relevant materials and accessories from lay down area to work location.
    • Shall be involved in fit-up and fabrication activities.
    • Shall be in involved in ensuring safety of self and others on site
    • Shall be conversant with basic ethics aimed at controlling quality of works
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Engineering, EPC, Completions Engineer, Oil & Gas, Operations, Production

    PTW/Materials Man

     

    Job Description

    • Responsible for coordinating the raising of Permit To Work on behalf of the DW ECP Construction team on the FPSO.
    • Establishes accurate records and filing of PTW information in a retrievable / accessible manner.
    • Good management and tracking of materials and accurate records of materials database.
    • Takes part and contributes meaningfully during PTW review meetings.
    • Ensures strict implementation of PTW rules at work locations.
    • Ensure PTWs are conspicuously displayed at work locations and adequately sheathed from adverse weather conditions.
    • Coordinates and controls materials movements from / to offshore site or contractors’ bases.
    • Ensures that materials movements are efficiently and safely performed to satisfy the operational requirements in accordance with Company rules and procedures.
    • Coordinates with the staff of both support sections and operational sites and also with the entities supplying the logistic, warehousing, stock management services and computerized management system (SAP) services.
    • Participates in work permit co-ordination meetings and ensures lack of conflict between work requests.
    • Checks that work permits pertain to corresponding work orders and that they are filled out clearly and precisely.
    • Controls number of hot work permits to site specified limits.
    • Raises and ensures all work permits are fully approved before commencement of any work permit related job.
    • Ensures that all required complementary permits are fully approved Fabric Maintenance and attached to any work permit.

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma or degree holder and must be computer literate and at least 5 years experience of Logistics, stock control and warehousing with minimum 5 years experience in oil industry in operations.
    • Experience of Computerised Stock and Procurement management systems including some experience of SAP.
    • Experience in Offshore construction, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production Industry preferably on an FPSO.
    • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
    • Shall be conversant with basic ethics aimed at controlling quality of works
    • Shall be in involved in ensuring safety of self and others on site Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Completions Engineer, Engineering, EPC, Oil & Gas, Production, Operations

    Rope Access Technician/L2

     

    Job Description

    • Responsible for management of a trade specific team of skilled technicians providing support services for planned and unplanned Site Rope Access activities
    • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on scaffolding operations placed under his responsibility
    • Provides technical knowledge, expertise and support for Rope Access activities
    • Verifies that all procedures, specifications, standards and legislation are followed
    • Ensures works preparation before site works performance (risk assessment, techniques to be applied, rescue preparation, equipments preparation, checking/testing, backup devices, definition of anchors systems and points, rope and slings protection, lifelines when required …)
    • Follows performance of works on site (respect of rules, specifications, regulations and best practices)
    • Proposes alternatives to complex interventions
    • Have a comprehensive knowledge of advanced rescue techniques and participate, with his team, to first aid operations
    • Be able to give assistance for painting, piping, NDT inspection to other relevant disciplines when access to equipment/installation is complex
    • Check intervention reports in and write the technical reports related to his activity field
    • Assists the planning team by giving any technical support for preparation of the jobs

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma
    • IRATA level 2 mandatory
    • At least 5 years of experience in rope access usage.
    • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
    • Experience and knowledge of painting and NDT inspection operations with related QA/QC aspects and qualifications when required
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Completions Engineer, Engineering, EPC, Oil & Gas, Operations, Production

    Scaffolder

     

    Job Description

    • Erecting and dismantling of scaffold
    • Working close with Scaffolding Foreman as required on the job.
    • Ensures that COMPANY’s HSE regulations are respected (especially procedures related to works permits) as well as approved operating procedures and standard industry practice during performance on scaffolding operations placed under his responsibility
    • Verifies that all procedures, specifications and standards are followed
    • Ensures that the operations planned work scope is managed effectively in accordance with agreed targets to avoid disruption.
    • Manages the specific team of technicians within your discipline.
    • If requested, identify resource requirements and deploy as necessary to safely liquidate specific scopes of work.
    • Ensures that day to day requirements are met with regards Scope, Tool and means and onsite risk assessments.
    • Undertakes any other duties which may be required (within individuals Competency) to ensure in the smooth running of the operation.
    • Ensures that plant, equipment and materials stocks are monitored, and all required certification is in place.
    • Identifies present and potential problems, reports and discuss and proposes solutions/alternatives
    • Ensures that any faulty or damaged equipment is quarantined and details are reported
    • Where required, assists with methods support and return information to the relevant representative.
    • Ensures awareness with KPI requirements

    Qualifications
    The holder of this position must have the following qualifications:

    • Technical Diploma
    • At least 5 years of experience in scaffolding activities in industrial context
    • With relevant scaffold professional qualification certificates (like Basic Part1, Basic Part2, Scaffolding inspector,...) delivered by accredited organism
    • Experience in oil and gas industry to have knowledge of the specific environment linked to HSE aspects
    • Capabilities to design & calculate scaffold following location, loads ...
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Engineering, EPC, Completions Engineer, Oil & Gas, Operations, Production

    Safety, Health, Environment and Quality (SHEQ) Manager

     

    Job Summary
    The employee will be responsible to implement and manage the:

    • Company wide Integrated Management System
    • SHEQ System and Procedures
    • Maintenance of ISO Certifications

    Summary of Essential Job Functions

    • Responsibility for the implementation of the company’s ISO-9001 compliant quality management system (QMS) throughout the business
    • Responsibility for the implementation of the company’s ISO 140001:2004 compliant environmental management system (EMS) throughout the business
    • Responsibility for the implementation of the company’s OHSAS 18001: 2007 Occupational health, safety management (OHSMS) compliant system throughout the business
    • Compile the SHEQ statistics and other data required for the management review and implement agreed actions focusing on continuous improvement of the QMS, EMS and OHSMS
    • Liaise and coordinate with Heads of Departments to ensure corporate and contractual SHEQ requirements are implemented and targets met
    • Manage, organise, and execute process, accident/incident investigation and system audits throughout the business
    • Manage, organise, and execute risk assessments
    • Ensure adequate posting of safety notices / circulars
    • Maintain metrics to monitor and close-out of audit findings
    • Develop customer focused information packages, presentations and solutions during the tender phase of projects, maintaining continuity during handover to project teams and/or the Heads of Departments
    • Develop and implement continuous improvement, customer-oriented solutions
    • Interact cross functionally with project and functional management to resolve quality health, safety & environment issues
    • Review technical requisitions and procurement documentation for quality, health, safety & environment compliance
    • Manage, plan and implement subcontractor / vendor audits to meet QMS / SMS & EMS, project and corporate requirements
    • Develop and distribute management reports
    • Audit Departmental compliance with contractual requirements
    • Develop, implement and monitor continuous improvement action plans

    Experience Required:

    • 20 years’ experience
    • Working as an HSE and/or SHEQ Manager for international companies in construction and oil and gas
    • Experienced in implementing new SHEQ systems
    • Experienced in getting and maintain ISO certifications

    Primary Skills:

    • EPC, Engineering, BSc, Oil & Gas, QA/QC, Quality Control

    Senior Rigger

     

    Job Description

    • Achieves lifting activities offshore on schedule and according to HSE regulations.
    • Manages a rigging team offshore efficiently and in a good working spirit.
    • Ensures effective and timely response to construction activity and ensure compliance with company procedures.
    • Validates offshore construction works by ensuring that they are accurate and meet overall Statement of Requirements.

    Activities:

    • Ensures HSE values are well understood and are not breached under any circumstance while carrying out offshore construction activities on the FPSO.
    • The Senior Rigger is the designated ‘responsible person’ in overall charge of lifting equipment and operations on the FPSO under ECP scope of work.
    • Preparing lifting plan.
    • Preparing the permit to work and getting it approved by Site Lifting Specialist.
    • Organize day to day work offshore in conjunction with ECP construction work leader.
    • Compiling and maintaining a Rigging Loft register and make sure that equipment is in good conditions.
    • Ensures that the level of supervision on site is sufficient to meet project specifications requirements.
    • Acting as handling and lifting authority on validation of contractor’s key deliverables and prescribed audits as necessary
    • Liaising with Site Lifting Specialist on a day to day basis for all lifting operations.
    • Reports any issue to construction work leader and maintain regular and efficient information to him.

    Qualifications
    The holder of this position must have the following qualifications:

    • Diploma holder
    • Experience in Offshore construction, Site supervision, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production Industry preferably on an FPSO.
    • Advanced rigging and lifting level 2 competences minimum.
    • Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
    • Ability to work in a large multinational team
    • Ability to work independently while maintaining good relations with colleagues and others
    • Physical ability to work on offshore installations in the climatic conditions of the site
    • Working language: English mandatory, French is an advantage

    Primary Skills

    • Engineering, EPC, Oil & Gas, Operations, Production

    Method of Application

    Interested and qualified? Go to Hobark International Limited (HIL) career website on jobs.cbizsoft.com to apply

  • ❮ Back to All Jobs
  • Know more about Hobark International Limited (HIL)Similar Jobs
  • Search for jobs by keyword
  • Senior Reservoir Engineer at Eroton Exploration and Production Company Limited
  • OLT Electrical & Instrumentation Supervisor at Hobark International
  • Human Resource Job at Petrok Oil and Gas
  • Human Resource Assistant at a Maritime Institution - George Davidson & Associates (GDA)
  • Jobs at Adexen Recruitment Agency
  • Fresh Jobs at Hobark International Limited (HIL)
  • Business Development Executive at a Leading Technological Company - Petros Management Consulting
  • Drilling Job at Mosra Enerji Limited
  • Filter Jobs
  • State

    Field

    Education

    Experience


    Also include jobs without defined experience

 
 
Send your application through

Yahoomail Gmail Hotmail