• Ongoing Recruitment at Jagal Group (Part II)

  • Posted on: 26 October, 2015 Deadline: Not Specified
  • View Jobs in Oil and Gas / Marine View All Jobs at Jagal Group
  • Subscribe to free job alerts
  • Jagal Group is a leading Nigerian conglomerate with operations in the Oil&Gas, Construction and Manufacturing industries. The company has been growing successfully over the past 40 years, and has become a valuable and respected contributor to the development of the country's economy.

    Welder Foreman

     

    Prime Responsibilities and duties

    • Ability to weld all position of welding such as 3G, 4G, 6G & 6GR on SMAW/FCAW on both plate and pipe.
    • Study engineering drawings and blueprints to determine materials requirements and task sequences.
    • Welding spare parts in various directions: flat, horizontal, vertical or overhead, etc.;
    • Supervising and identifying any fault in operating the equipment or in relation to any material or equipment, then notifying the supervisors;
    • Clamping, holding, tack-welding, heat-bending, bolting, or grinding spare parts as necessary to satisfy the technical requirements and create a welded final product;
    • Operating other accessory equipments and performing some tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, and other types of welding arcs;
    • Examining finish products and spare parts and comparing them with samples to check whether the specifications are met;
    • Being in charge of preparing and setting up necessary tools and equipments for welding job such as shielded metal arc, gas metal arc or other welding equipments

    Key Internal Interfaces

    • Welding Manager
    • Fabrication Manger
    • Welder and other Staff

    The Person

    • Relevant trade test(s) and SSCE. Higher qualifications are added advantages.
    • 7 years minimum, in major Oil & Gas EPC projects, must possess vast Knowledge in the fabrication industry.
    • Safety certificate (general) and other safety certification will be an added advantage.
    • Responsible for the execution and application of the HSE procedures within his work area.
    • Should have good communication skills and report writing abilities.

    go to method of application »

    Rigging Foreman

     

    Purpose / Role
    Responsible to the Rigging Superintendent for the leadership and organization of the rigging and moving loads function on the site/installation to fully execute the requirements of the rigging and moving loads support service safely and effectively Key aims and objectives.

    Prime Responsibilities and duties

    • Accountable for promoting Safety.
    • Plan & control work activities ensuring that a safe system of work is in place and followed during all lifting operations
    • Implement all applicable company / project policies, working practices and procedures, ensuring at all times that the rigging work scope is completed efficiently, in compliance with LOLER and to a high standard of safety.
    • Review and approve all lift plans developed by the site/installation rigging and moving loads function .
    • Complete all work scopes in accordance with applicable workpack / jobcard instructions, associated procedures and drawings / sketches.
    • Ensure job cards are completed and accurate progress reported
    • Ensure time writing for the rigging and moving loads function is accurate and completed on time.

    The Person

    • 5-8 years’ experience in rigging in Oil & Gas / Fabrication environment.
    • Previous Offshore Rigger experience is essential
    • Level 3 Rigging Assessment or equivalent certification is preferred.
    • Good level of verbal and written communication in English.

    go to method of application »

    Scaffolding Foreman

     

    Personnel reporting directly to this position

    • Scaffolders

    Purpose

    • The scaffolding foreman is a working foreman
    • Make sure the JSA,S and toolbox talks have been done correctly and are in place
    • Make sure the scaffolders are working safely and to the right standards and procedures

    Key aims and objectives

    • Safety of all personnel
    • Lead  scaffold  team  to erect  dismantle modify  all types  of scaffolding

    Prime Responsibilities and Duties

    • Make sure the work face is kept clean and tidy
    • Look with supervisor where scaffold needs erecting decide what materials will be needed arrange for forklift to bring materials from scaffold yard

    Other Duties

    • Make sure all his team are wearing the correct ppe

    Reports

    • Reports any issues he has to supervisor / superintendent

    Key Internal Interfaces

    • Scaffolding team
    • Scaffold Manager
    • Superintendent

    The Person

    • 5+ years’ experience
    • Be able to lead scaffold team
    • Be able to erect dismantle modify all types of scaffolds tube and fittings and system to British standards BSEN12811-1

    go to method of application »

    Pipe Fitter

     

    Qualification

    • Relevant trade test(s) and SSCE. Higher qualifications are added advantages.

    Prime Responsibilities

    • Trade Test Certification. 1&2 labour & productivity or Engineering background.
    • Years of Experience. 4years and above.
    • Good safety practices i.e.  Understanding of HSE.
    • Ability to read and interprete isometric drawings, P & IDS.
    • Ability to understand and interpret simple and complex pipe fabrication drawing
    • Conversant with abbreviations, signs & codes.
    • Ability to identify fittings & materials.
    • Marking out and layout of drawings.
    • Good understanding of piping spools orientation, elevations, co-ordinates & piping copping.
    • Ability to take measurements, do conversions, plates & piping calculations.
    • Bending of Isometric directions, preparation of plates & piping length of bevelled.
    • Use of grinding machine & burning set.
    • Must understand tools and equipment management.
    • Must have good attitude and behaviour.
    • Ability to use all fabrication /Fitting equipment and instrument
    • Awareness of safety rules and standard of the industry.

    Experience

    • 5- 8 years minimum working experience in the fabrication field.
    • Must have worked on a Pipe erection project.
    • Working experience on an EPC project will be an additional advantage

    go to method of application »

    Welding Supervisor

     

    Prime Responsibilities and duties

    • Ability to weld all position of welding such as 3G, 4G, 6G & 6GR on SMAW/FCAW on both plate and pipe.
    • Study engineering drawings and blueprints to determine materials requirements and task sequences.
    • Welding spare parts in various directions: flat, horizontal, vertical or overhead, etc.;
    • Supervising and identifying any fault in operating the equipment or in relation to any material or equipment, then notifying the supervisors;
    • Clamping, holding, tack-welding, heat-bending, bolting, or grinding spare parts as necessary to satisfy the technical requirements and create a welded final product;
    • Operating other accessory equipments and performing some tasks necessary for welding metal, such as fusing metal segments, using gas tungsten arc, metal arc, flux-cored arc, and other types of welding arcs;
    • Examining finish products and spare parts and comparing them with samples to check whether the specifications are met;
    • Being in charge of preparing and setting up necessary tools and equipments for welding job such as shielded metal arc, gas metal arc or other welding equipments

    Key Internal Interfaces

    • Welding Manager
    • Fabrication Manger
    • Welder and other Staff

    The Person

    • Relevant trade test(s) and SSCE. Higher qualifications are added advantages.
    • 10 years minimum, in major Oil & Gas EPC projects, must possess vast Knowledge in the fabrication industry.
    • Responsible for the execution and application of the HSE procedures within his work area.
    • Should have good communication skills and report writing abilities.
    • Should have vase experience in fitting with good supervisory qualities.
    • Safety certificate (general) and other safety certification will be an added advantage.

    go to method of application »

    Rigging Supervisor

     

    Prime Responsibilities and Duties

    · Knowledge of trade terminology (i.e. lifting equipment, lifting accessories, slings, shackles, wires, ropes, chains, cables, nets etc.).
    · The incumbent will make sure that gears for a lifting is conveyed to work site; and reporting of any defective rigging gear to Supervisor.
    · Knowledge of types and layout of drawings such as structural, layout, plant, equipment detail drawings etc.
    · Knowledge of abbreviations and drafting symbols such as lines, piping and fitting symbols, and control symbols commonly used.
    · Have the ability to recognize types of lifting equipment (i.e. wire rope hoists, beam clamps, beam trolleys, plate clamps, sheave blocks, winches etc.).
    · Have the ability to recognize types of lifting accessories (i.e. slings, shackles, wires, ropes, chains, cables, nets etc.).
    · Have knowledge and ability to determine if lifting equipment and lifting accessories are safe to use.
    · Have the ability to read and interpret, prepare and sign safety documents (i.e. PTW, Hazard Identification and Risk Assessment (HIRA), Lifting Risk Assessment (TRA) etc.).
    · Have the ability to store and assemble lifting equipment and lifting accessories in a safe location
    · Ability to report effectively to his superior/higher authority of any case of defective gears.

    Key Internal Interfaces

    · Rigging Manager
    · Fabrication Manger
    · Rigger and other Staff

    The Person

    · Relevant trade test(s) and SSCE. Higher qualifications are added advantages.
    · Must possess a Rigging Certificate from a certified professional body.
    · Working experience on an EPC project will be an additional advantage
    · 7 years’ experience in major Oil & Gas EPC projects must possess vast Knowledge in the fabrication industry.
    · Safety certificate (general) and other safety certification will be an added advantage.
    · Responsible for the execution and application of the HSE procedures within his work area.
    · Should have good communication skills and report writing abilities.
    · Should have vase experience in fitting with good supervisory qualities

    go to method of application »

    Scaffold Supervisor

     

    Purpose

    • Manage and coordinate the erection / dismantling / modification of all types of scaffolding to bsen12811-1 standard
    • Be conversant with traditional tube and fitting and system scaffolding
    • Show Forman scaffolder the task and make sure he has his jsa and toolbox talk in place

    Key aims and objectives

    • Meet with supervisors from other trades to discuss where scaffolds need erecting
    • Arrange for the correct materials to be brought to the work face to complete the task
    • Safety of all personel

    Prime Responsibilities and Duties

    • Make sure the correct use of harnesses and correct working at height procedure sg410 are being applied
    • Ensure work areas are maintained in a clean and orderly manor
    • Identify stop and immediately correct unsafe acts or conditions

    The Person

    • 10+ years’ experience
    • Have an affinity to work at heights
    • Be able to prepare jsa,and toolboxtalks

    go to method of application »

    Structural Fitter - 1

     

    Qualification

    • Relevant trade test(s) and SSCE. Higher qualifications are added advantages.

    Prime Responsibilities

    • 5- 8 years minimum working experience in the fabrication field.
    • Trade Test Certification. 1&2 labour & productivity or Engineering background.
    • Good safety practices i.e.  Understanding of HSE.
    • Conversant with abbreviations, signs & codes.
    • Ability to identify fittings & materials.
    • Ability to understand and interpret simple and complex structural fabrication drawing.
    • Ability to use all fabrication /Fitting equipment and instrument
    • Must understand tools and equipment management.
    • Awareness of safety rules and standard of the industry.

    Experience

    • 5- 8 years minimum working experience in the fabrication field.
    • Must have worked on a structural fitting   project.
    • Working experience on an EPC project will be an additional advantage

    go to method of application »

    Coating Foreman

     

    Purpose
    To be a team player in the corrosion protection treatment process of Fabricated Structural Steel Structures and Associated items.

    Key aims and objectives

    • To apply your work skills in a manner which enables the Coating Department to deliver defect free product, which conforms to customer supplied specifications and Project working procedures.
    • To assist the department in achieving this objective at the first attempt, within the time allowed and at each subsequent attempt.

    Prime Responsibilities and Duties

    • The following will be expected of you while you are in the employ of Nigerdock PLC FZE
    • To take responsibility for the satisfactory execution of all work instructions issued to the workers in your team.
    • To issue these instructions clearly and to ensure they are well understood.
    • To ensure all work is executed according to the requirements of project and/or Nigerdock supplied working instructions.
    • To ensure that you have read and fully understand the contents of the relevant working procedures, enabling you to ensure the desired  level of quality is attained .
    • To ensure that you and the workers under you wear the correct level of PPE and that they work in a safe environment, utilizing correctly maintained equipment and tools.
    • To pre- plan your teams work and assist the individuals in planning the execution of their instructed tasks.
    • To ensure that your workers carry out tasks in an efficient manner, with all necessary consumables on hand.
    • To work with your team and to be able to delegate tasks with authority and in a clear manner.
    • To report all faulty equipment and take the necessary action in either fixing it or making sure that the item gets replaced if it is not repairable.
    • To follow up on the progress and completion of  tasks delegated to members of your team.
    • You will always assume full responsibility for all work under your control.
    • To ensure and if necessary teach your team to work as a competent unit, always taking into account the safety of others working adjacent to your work area.
    • To ensure that each individual executes work tasks in accordance with the requirements of the stipulated working procedure.
    • To always ensure a JSA has been conducted for the proposed work and that all actions stated ate obeyed.
    • To always conduct a job specific toolbox talk with your team, identifying the work hazards prior to entering the work area.
    • To set an example to those working below you.

    Other Duties
    When not performing your primary function as a Foreman, you are expected to take part in any other activities associated with the functioning of the department.

    Method of Application

    To apply for these positions, visit Jagal Group Career Page on HRSmart

  • ❮ Back to All Jobs
  • Know more about Jagal GroupSimilar Jobs
  • Search for jobs by keyword
  • OLT Electrical & Instrumentation Supervisor at Hobark International
  • Human Resource Job at Petrok Oil and Gas
  • Human Resource Assistant at a Maritime Institution - George Davidson & Associates (GDA)
  • Jobs at Adexen Recruitment Agency
  • Fresh Jobs at Hobark International Limited (HIL)
  • Business Development Executive at a Leading Technological Company - Petros Management Consulting
  • Drilling Job at Mosra Enerji Limited
  • Document Controllers at Jagal Group
  • Filter Jobs
  • State

    Field

    Education

    Experience


    Also include jobs without defined experience

  « 1 Recently Viewed Job
 
 
Send your application through

Yahoomail Gmail Hotmail