Jobs at Flour Mills of Nigeria Plc

Purpose

• To carry out installations, repairs and maintenance of air-conditioning system and scales in the company and its   subsidiaries to ensure their proper working condition.

The Job

• Carry out repairs and maintenance of air-conditioning system, lifts and industrial electronics       gadgets to ensure all the electronics devices used in weighing are operating in good working condition.
• Carry out daily checks on the air condition system in the switch rooms, to ensure optimal performance of the equipment. 
• Participates in the design and modification of specialized electronic equipment for research purposes; provides technical advice on the selection of components
• Assist in the installation, testing, and commissioning of new electrical equipment and systems.
• Respond promptly to equipment breakdowns and emergency power-related issues.
• Ensure compliance with electrical safety standards, company policies, quality requirements, and food safety standards.

Qualifications

• 5 O-Level credits, including Mathematics and English/ NABTEB, or Trade Test Grade.
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:

• Minimum of two (2) years' relevant experience in mechanical maintenance, welding, fabrication, or industrial equipment repairs.

The Person Must:

• Have good verbal and written communication skills.
• Possess sound mechanical fitting and welding skills.
• Demonstrate strong troubleshooting and fault-diagnosis capabilities.
• Have good fabrication and equipment installation skills.

go to method of application »

Purpose

• To carry out rewinding jobs in the workshop to reduce downtime and costs accruing from the failure of  electric motors.

The Job

• Carry out rewinding activities in the workshop for the company and its subsidiaries
• Assess and quantify materials needed for individual rewinding jobs
• Ensure cost-effective use of materials to reduce wastage
• Repair and rewind power plant alternators
• Create and maintain a proper record of completed jobs in the workshop logbook
• Diagnose electrical faults in motors and rotating equipment and recommend appropriate repair solutions.
• Dismantle, clean, and reassemble electric motors, generators, and alternators during overhaul and maintenance activities.

Qualifications

• 5 O-Level credits, including Mathematics and English/ NABTEB, or Trade Test Grade.
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:

• Minimum of two (2) years' relevant experience in motor rewinding and repair, alternator rewinding, generator maintenance and repairs.

The Person Must:

• Have good verbal and written communication skills.
• Possess good analytical and problem-solving skills.
• Be able to thrive in a collaborative, fast-paced environment.

go to method of application »

Purpose

• To carry out cost-effective and efficient sheet metal fabrication activities in the workshop in order to produce metal parts used in installation and work maintenance.

The Job

• Carry out design and development of sheet metal related fabrications according to specifications within safety rules
• Carry out regular cleaning and lubrication of machines and tools used in sheet metal workshop to enhance smooth operation
• Study relevant documentation including sample parts, blueprints, and drawings in order to determine the method and sequence of operations needed to fabricate products
• Make necessary measurements and calculations for accurate fabrication of sheet metal
• Estimation and planning of materials needed for individual fabrication jobs and make requisition for same
• Ensures cost effective use of materials to reduce wastage
• Carry out repair of damaged components in the plants.

Qualifications

• 5 O-Level credits, including Mathematics and English/ NABTEB, or Trade Test Grade.
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:

• Minimum of two (2) years' relevant experience in metal cutting and shaping, blueprint and technical drawing interpretation, structural steel fabrication, machine operation and maintenance, metal forming and bending, stainless steel and aluminum fabrication.

The Person Must:

• Have good verbal and written communication skills.
• Possess good analytical and problem-solving skills.
• Demonstrate the ability to follow established procedures and quality control processes.
• Be able to thrive in a collaborative, fast-paced environment.

go to method of application »

Purpose

• To carry out mechanical fitting activities within the company and its subsidiaries to support machine maintenance work according to set objective

The Job

• Fitting and assembly of structural frameworks and housing
• Carry out installation, servicing and repair of factory machinery including pumps, gear boxes, drives, etc.
• Produce machine components using relevant hand tools
• Fabrication of material handling equipment, conveyors, elevators for Flour Mills and subsidiaries
• Perform scheduled preventive maintenance on the packing machines to minimize equipment downtime.
• Replace damaged, worn, or defective structural and mechanical components as required.
• Perform preventive and corrective maintenance activities in line with maintenance plans and operational requirements.
• Report the general condition of equipment and recommend replacement when necessary to supervisor.

Qualifications

• 5 O-Level credits, including Mathematics and English/ NABTEB, or Trade Test Grade.
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:

• Minimum of two (2) years' relevant experience in mechanical maintenance, welding, fabrication, or industrial equipment repairs.

The Person Must:

• Have good verbal and written communication skills.
• Possess sound mechanical fitting and welding skills.
• Demonstrate strong troubleshooting and fault-diagnosis capabilities.
• Have good fabrication and equipment installation skills.

go to method of application »

Purpose

• To ensure that electrical systems/components of forklifts and other mobile equipment are in good working condition for their smooth running.

The Job

• To carry out electrical maintenance (routine, planned and preventive) and repairs on all forklifts.
• Carry out daily routine checks on all operational forklifts.
• To ensure forklift batteries are in good condition.
• To troubleshoot and rectify electric faults.
• To ensure all electrical safety units are always in good working condition on all forklifts.
•  Carry out regular electrical inspections in line with best maintenance practices.
• Promote autonomous maintenance through consistent electrical checks.
• Maintain accurate documentation and generate service reports.

Qualifications

• 5 O-Level credits, including Mathematics and English/ NABTEB, or Trade Test Grade.
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:

• Minimum of two (2) years' relevant experience in a similar role.

The Person Must:

• Have strong troubleshooting and diagnostic skills in heavy equipment electrical systems.
• Be detail-oriented with strong reporting and documentation skills.
• Demonstrate ability to work efficiently under pressure and manage heavy workloads.
• Possess good knowledge of safety practices in electrical maintenance.
• Be proactive and capable of working with minimal supervision.

go to method of application »

Purpose

• To operate efficiently and maintain NEFM Boiler equipment while liaising with Boiler Supervisor,
• Sectional Managers and operations to always deliver high-quality steam.

The Job

• To ensure in collaboration with Utilities team that all Boilers in FMN or GSC, and associated equipment are operated reliably per OEM standards and best practices in the industry.
• In collaboration with the utilities management team, to carry out overall preventative; corrective; shutdown/repair maintenance for all the boilers as assigned in line with set OEM standards and SOP.
• Liaise with other boiler utilities technicians and site/plant operations to always deliver thermal efficiencies (fuel/steam; fuel/finished product; condensate utilization, right boiler water chemistry) and any other utilities improvement initiative in line with production demands while proactively mitigating downtimes as much as possible.
• Consistently upskill oneself to confront boiler operational realities with a view to position oneself for next challenges.

Qualifications

• 5 O-Level credits, including Mathematics and English/ NABTEB, or Trade Test Grade.
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:

• Minimum of two (2) years' relevant experience in boiler installation and commissioning, boiler maintenance and repairs.

The Person Must:

• Have a keen eye for detail and a commitment to quality standards.
• Have good verbal and written communication skills.
• Possess good analytical and problem-solving skills.
• Demonstrate the ability to follow established procedures and quality control processes.
• Be able to thrive in a collaborative, fast-paced environment.

go to method of application »

Purpose

• To carry out all welding activities within the company and its subsidiaries to support machine maintenance and work according to set departmental objectives.

The Job

• Carry out welding of fabricated components within the workshop and company premises.
• Analyze requested jobs to decide the type of welding materials to be used.
• Carry out welding repair of damaged components, devices and machinery.
• Carry out welding activities during installation of pipelines.
• Carry out aluminum welding for production plants.
• Make requisition for material to be used in welding work.
• Soldering of cooling radiators for plants.
• Specialized cast welding repairs for subsidiaries.
• Specialized MIG and TIG welding repairs.

Qualifications

• 5 O-Level credits, including Mathematics and English/ NABTEB, or Trade Test Grade.
• NABTEB / City & Guilds (C&G) in a related discipline.

Experience:

• Minimum of two (2) years' relevant experience in metal fabrication and assembly, structural steel installation, preventive maintenance and mechanical fitting.

The Person Must:

• Have good verbal and written communication skills.
• Have a keen eye for detail and a commitment to quality standards.
• Possess good analytical and problem-solving skills.
• Be able to thrive in a collaborative, fast-paced environment.