Never pay for any CBT, test or assessment as part of any recruitment process. When in doubt, contact us
The Dangote Group is one of the most diversified business conglomerates in Africa with a hard-earned reputation for excellent business practices and products' quality with its operational headquarters in the bustling metropolis of Lagos, Nigeria in West Africa.
The Group's activities encompass:
Cement - Manufacturing / Importing
Sugar - Manufacturing ...
Read more about this company
Description
We are looking for Excavator Operator who will be responsible for operating Excavator in a safe and effective manner.
Requirements
- A Trade Test or its equivalent in a relevant discipline.
- A minimum of two (2) years’ experience in the operation of excavator.
Key Duties and Responsibilities
- Operate all excavator in a safe and efficient way according to all relevant legislation, policies and procedures.
- Perform daily safety and maintenance checks of machinery.
- Conduct pre-operational checks on excavator and clean, lubricate and refill equipment as scheduled and/or required.
- Ensure all excavator is safely and securely stored.
- Participate in routine maintenance of Excavator Machinery.
- Recommend any requirements for maintenance or repairs to the Shift Coordinator.
- Practice workplace safety.
- Perform any other duties as may be assigned by the Shift Engineer from time to time.
Skills and Competencies
- Ability to operate required equipment in a safe and responsible manner.
- Good oral and written communication skills.
- Good networking and teaming skills.
- Good data gathering and analysis skills.
- Baseline problem analysis and solving skills.
- Creativity and an ability to think out of the box.
- Proficiency in the use of office productivity tools.
Benefits
- Private Health Insurance
- Paid Time Off
- Training and Development
go to method of application »
Description
We are looking for Grader Operator who will be responsible for operating the grader in a safe and effective manner.
Requirements
- A Trade test or its equivalent in a relevant discipline.
- A minimum of two (2) years’ experience in the operation of grader.
Key Duties and Responsibilities
- Operate the grader in a safe and efficient way according to all relevant legislation, policies and procedures.
- Perform daily safety and maintenance checks of the grader.
- Conduct pre-operational checks on grader and clean, lubricate and refill the grader as scheduled and/or required.
- Ensure grader is safely and securely stored.
- Participate in routine maintenance of grader.
- Recommend any requirements for maintenance or repairs to the Shift Coordinator.
- Practice workplace safety.
- Perform any other duties as may be assigned by the Shift Engineer from time to time.
Skills and Competencies
- Ability to operate required equipment in a safe and responsible manner.
- Good oral and written communication skills.
- Good networking and teaming skills.
- Good data gathering and analysis skills.
- Baseline problem analysis and solving skills.
- Creativity and an ability to think out of the box.
- Proficiency in the use of office productivity tools
Benefits
- Private Health Insurance
- Paid Time Off
- Training and Development
go to method of application »
Description
JOB PURPOSE
Ensure deployment of safe driving improvement programs for the Customer Trucks Empowerment Scheme (CTES).
KEY ROLES & RESPONSIBILITIES
- Develop road transport standard operating procedures/policies and cascading to customers & other key stakeholders.
- Develop key performance indicators, keep a record of incidents, monitor trends, and carry out performance analysis
- Participate in regular meetings with sales & marketing management, assessing and addressing safety issues and implement improvements towards safe CTES operations
- Develop a safety inspection checklist for CTES trucks and carry out regular safety inspections to ensure their safe operation.
- Lead investigations of all road traffic incidents and share learnings amongst key stakeholders
- Set up a CTES accident review panel that will review fatal/serious accidents.
- Manage the Defensive Driving Training program for CTES drivers
- Promote and uphold safety awareness amongst CTES customers
Requirements
SKILLS AND BAHAVIOURS
- First degree BSc. + certification in Safety Management. MSc. degree will be an advantage.
- 10 years relevant working experience as HSSE professional in either the Manufacturing/Construction/FMCG/Oil and Gas Industry.
- Highly skilled incident management (incident reporting, investigation, analysis and follow up on the implementation of corrective actions)
- High experience in the use of Tripod Beta or any other Root Cause Analysis Tools and Techniques will be an added advantage.
- Experienced in performance analysis and change management
Benefits
- Private Health Insurance
- Paid Time Off
- Training & Development
- Career Development
go to method of application »
Description
Position : SAP Functional Support Analyst – Plant Maintenance
Department & BU: IT/Dangote Cement Plc
Reports To: SAP HR/Payroll Team Lead, IT
Direct Reports:
Job Summary
The Information Technology Department at Dangote Cement Plc is looking for motivated professionals with SAP experience in the Human Capital Management module. The resource(s) would join our team of professionals to support the daily SAP operations of the business and SAP implementation projects.
Requirements
Key Duties and Responsibilities
- Functional support for SAP HCM modules.
- Manage multiple simultaneous SAP projects and Tasks from conception to completion. Requirements gathering and scope definition together with various business stakeholders.
- Plan and coordinate resources and activities to meet business requirements and project completion dates.
- Work with end-users to provide system support to the business while sharing knowledge and understanding.
- Gather business requirements and convert them into development design/programming specifications
- Perform functional testing, and creating documentation, and conducting end-user training in conjunction with other members of the SAP Core team.
- Work with both internal or external design/implementation teams and work cross-functionally between the business and IT to bridge the gap between design, content, and technology.
- Provides analysis for and directs activities of SAP HCM resources as determined by and in conjunction with the senior management team.
- Manage end-to-end integration needs with the respective modules and other applications.
- Definition of innovative functional solutions to meet business process requirements in SAP and/ or other supporting application systems.
- Detailed knowledge of the SAP Plant maintenance master data, Maintenance notifications, Maintenance orders and preventive Maintenance, Calibration process, Refurbishment Process, and Work Clearance Management
Benefits
- Private Health Insurance
- Paid Time Off
- Training & Development
go to method of application »
Description
We are looking for an electrical engineer who will help us advance our electrical products, systems, and applications. On a daily basis, you’ll carry out various engineering tasks, such as performing calculations to ensure our systems meet the global safety standards and collaborating with technicians and computer programmers to solve emerging issues. Ultimately, you will improve our company’s products and processes and contribute to its growth.
Overseeing maintenance of Electrical equipment for optimum performance, raises indent for replacement of spare parts and provide maintenance support for shift operations.
Requirements
- Ensures/enforces maximum safety procedure in execution of all jobs.
- Supervises all planned and corrective maintenance jobs for effective/efficient plant operation.
- Participates in new equipment installations and commissioning.
- Organizes work schedules/manpower allocation of daily jobs in the plant.
- Perform power analysis on electricity consumptions.
- Modifies control for smooth process operations.
- Ensure compliance with ISO Standards
- BSc/HND (Electrical/Electronic Engineering)
- Minimum 5 years post NYSC relevant experience
- Computer literate with proficiency in MS Word, Excel, Power Point.
- Should be able to work with less supervision.
Benefits
Benefits
- Private Health Insurance
- Paid Time Off
- Training & Development
- Performance Bonus
go to method of application »
Description
Perform routine maintenance, repairs, installation, calibration, adjustment and integration of various types of plant instrumentation equipment.
Requirements
Education and Work Experience
- Ordinary National Diploma of its equivalent in Electrical Engineering or related discipline.
- Trade Test with Minimum of (8) years relevant work experience.
Key Duties and Responsibilities
- Perform all work order maintenance, troubleshooting, and calibration of plant equipment as directed.
- Troubleshoot, inspect, test, maintain, repair, clean and calibrate instrumentation and solid state and microprocessor based control equipment including plant communications equipment, programmable controllers, distributive control systems, generator excitation equipment, battery chargers, and semi-conductor devices.
- Repair or replace control devices such as switches, photo eyes, proximity sensors, pushbuttons, contactors, motor starters, transmitters, etc. as needed.
- Install control and measurement instruments on existing or new plant equipment.
- Use a wide range of test equipment, including recorders, computers, control and tuning modules, PC based software analyzer programs, oscilloscopes, data analyzers, logic test equipment, analogue and digital multi-meters, meggars and other test equipment, while performing tests to identify problems and to maintain and calibrate equipment to performance standards.
- Make regular inspection rounds of plant instrumentation, and control equipment.
- Assist in developing detailed preventive and predictive maintenance procedures for plant instrumentation and control equipment.
- Install, build, or modify plant instrument, and control equipment as directed by the Instrumentation Engineer or Section Head.
- Troubleshooting, repair, and minor programming of various PLC control systems, frequency drives and other electrical equipment.
- Participate in plant safety, health and environmental programs and observe safety in accordance with government and company standards.
- Perform any other duties as may be assigned by the Section Head from time to time.
Skills and Competencies
- Good knowledge of phase testers, multimeters, meggers and other testing equipment.
- Ability to read and interpret documents and drawings.
- Good oral and written communication skills.
- Very good organisational skills.
- Good interpersonal, networking and teaming skills.
- Proficiency in the use of office productivity tools
Benefits
- Training & Development
- Performance Bonus
- Paid Time Off
- Private Health Insurance
go to method of application »
Description
- Perform a variety of tasks pertaining to the installation, maintenance, repair and service of mechanical equipment, instruments and structures used within the plant.
Requirements
Education and Work Experience
- ND or equivalent qualification in a relevant discipline.
- Zero (0) to four (4) years work experience.
Skills and Competencies
- Good knowledge of methods and techniques of implementing a preventive and predictive maintenance program.
- Good organizational skills.
- Good analytical and problem solving skills
- Good oral and written communication skill.
- Proficient in the use of Microsoft Office.
Key Duties and Responsibilities
- Perform maintenance and repair duties for the plant.
- Inspect, maintain, troubleshoot, repair and service facilities, machinery and equipment and perform or make recommendations regarding maintenance and repair activities.
- Perform preventive and predictive maintenance checks and servicing on equipment by implementing maintenance schedules.
- Perform corrective mechanical maintenance by troubleshooting the cause of malfunctions using visual inspection and precision measuring and testing instruments and replacing or repairing broken parts.
- Rebuild equipment as needed; disassemble and clean items; order replacement parts and repair mechanical malfunctions; reassemble and test items.
- Work with engineers as needed in order to complete assignments; provide input as requested regarding the design, installation and maintenance of systems.
- Read and interpret blueprints and schematics; provide input and recommend changes on design blueprints as requested.
- Operate and maintain a variety of hand and power tools used in the performance of assigned duties.
- Prepare reports, forms, correspondence and related documentation regarding assigned operations in a complete, accurate and timely manner.
- Adhere to safety orders and comply with established regulations in all aspects of work.
- Perform any other duties as may be assigned by the Engineers from time to time.
Benefits
- Private Health Insurance
- Paid Time Off
- Training & Development
- Performance Bonus
go to method of application »
Description
We are looking for a skilled Instrumentation Engineer who will be responsible for preventive, corrective, troubleshooting, shutdown, major and minor maintenance activities, on various types of instrumentation.
Requirements
- A Bachelor’s degree or its equivalent in Electrical Engineering or a related discipline.
- 3 - 5 years related job experience.
Key Duties and Responsibilities
- Carry out all preventive maintenance / breakdown maintenance of all Instrumentation equipment as per SAP.
- To Plan for spares for Instrumentation Equipment.
- Zero breakdown and Zero tripping of Instrumentation equipment by high quality maintenance and zero defect in Instrumentation system.
- To follow the instructions from Superior always.
- Always follow-up the Norms of NIS, ISO 14001-2015, NIS, ISO 9001-2015, NIS, OHSMS-45001-2018 strictly on regular basis.
- Perform any other duties as may be assigned by the Section Head.
Skills and Competencies
- Good knowledge of instrumentation operation, monitoring and maintenance.
- Good communication skills.
- Good problem solving and analytical skills.
- Excellent communication, people management and interpersonal skills.
- Good oral and written communication skills.
- Good networking and teaming skills.
- Proficiency in the use of office productivity tools.
Benefits
- Private Health Insurance
- Paid Time Off
- Training & Development
- Performance Bonus
go to method of application »
Description
We are looking for a creative Mechanical Engineer to work on all product stages from research and development to design and manufacture, through to installation and final commissioning. The goal is to design and fabricate mechanical components of innovation and excellence.
Key Duties and Responsibilities
- To ensure that mechanical maintenance are carried out properly & safely as per the requirement of the plant.
- To carry out maintenance of plant’s mechanical equipment.
- To train subordinate in order to ensure that mechanical maintenance are done timely and correctly.
- To ensure proper housekeeping of job areas and plant in general.
- Spares requirement planning.
- To follow instruction from superior always.
- Always follow-up the norms of NIS, ISO 19001-2015, NIS, ISO 14001-2015 & NIS ISO 45001-2018 on regular basis and maintain the records accordingly.
Requirements
- Proven working experience in mechanical engineering
- Working experience with product lifecycle management (PLM), finite element analysis (FEA) and computational fluid dynamics (CFD)
- Hands-on experience with computer-aided engineering (CAM) and computer-aided manufacturing (CAE)
- Familiarity with 2D or 3D engineering design and manufacturing tools (e.g., AutoCAD, ProE or other)
- Adequate knowledge of engineering analysis tools (ANSYS, ProMechanica or similar)
- Mathematical computing and analysis tools knowledge (Matlab, Excel, LabView etc)
- Solid understanding of core concepts including mechanics, kinematics, thermodynamics, materials science etc.
- Creativity and analytical skills
- Ability to communicate technical knowledge in a clear and understandable manner
- Technical writing skills
- BSc degree in Engineering
Benefits
- Private Health Insurance
- Paid Time Off
- Training & Development
- Performance Bonus
go to method of application »
Description
- Maintenance activities on all Gas generator Engines & accessories.
- Modification, fabrication / construction jobs.
- Installation of existing and new equipment and accessories.
- Repair and fabrication of supports, stands, canopies, for both electrical, mechanical and instrumentation departments.
- Rigger’s activities for the power plant Like lifting and shifting.
- Norms of NIS, ISO 14001-2015, NIS, ISO 9001-2015, NIS, OHSMS 45001-2018 are adhered to strictly on regular basis.
- Any other duties as may be assigned by the superior.
Requirements
- Minimum of two (2) years of working experience in Rigging and Plant Maintenance Jobs.
- Trade Test, OND or its equivalent.
Benefits
- Private Health Insurance
- Paid Time Off
- Training & Development
- Performance Bonus
Method of Application
Use the link(s) below to apply on company website.
Build your CV for free. Download in different templates.
Gmail
Yahoomail