Fresh Vacancies at Saro Lifecare Limited

Location: Ibadan, Oyo

Job Summary

• To ensure that the processing and packaging line are working according to specified/ recommended guidelines and agreed standard operating procedures.
• This is to enable deliver target production volumes within specified Time, with optimized resource and at the right Quality.

Responsibilities

• The incumbent should be able to Set up machines, initiate calibration and cleaning needed to start a production cycle, as well deliver a seamless run.
• Control and adjust machine settings (e.g. speed)
• Ensue the right quality and quantity of raw material or parts are fed to the process and packaging machines.
• Inspect parts with precision and measuring tools.
• Test operation of machines periodically
• Fix minor issues that might occur during the shift, as well as refer issues to the key/ competent technical teams, when the escalation thresholds are reached.
• Check output to spot any machine-related mistakes, flaws or quality concerns.
• Keep records of approved and defective units or final products.
• Maintain production and activity logs as well as analyze trends.
• Maintain proper housekeeping and cleanliness of the equipment and workplace.
• Be a champion of Safety for self, others, equipment, and general workplace.
• Must be able to synergize with other Design Departments to achieve set goals.
• Accountability for assigned works with attention to detail is a must have.
• Must be able to work with minimum supervision.

Qualifications and Requirements

• Minimum of OND in Electrical / Mechanical / Production / Industrial Engineering or related field.
• Have at least a 3-years related machine operator experience in an FMCG plant (preferably an Aerosol/insecticide manufacturing facility).
• Knowledge of LPG systems, pneumatic systems, and factory gas operations.
• Knowledge of aerosol packaging machines as well as safety and fire suppression systems.
• Should have basic electrical knowledge and troubleshooting.
• Working knowledge of diverse high-speed machinery and measurement tools (caliper, micrometer etc.)
• Understanding of production procedures
• Adherence to health and safety regulations (e.g. constant use of protective gear)
• Ability to read blueprints, schematics, and manuals.
• Age: 23 - 35 years old.

Skills and Competencies:

• Good oral and written communication skills.
• Good teaming skills.
• Baseline problem analysis and solving skills.
• Creativity and an ability to think out of the box.
• Proficiency in the use of office productivity tools.

go to method of application »

Location: Ibadan, Oyo

Job Summary

• To ensure that the process plant, and tank farm operations are working according to specified/ recommended guidelines and agreed standard operating procedures.
• This is to enable deliver target production volume within specified Time, with optimized resource and at the right Quality.

Responsibilities

• The incumbent should be able to oversee processing operations within the facility, set up machines, initiate calibration, perform cleaning, control as well as adjust process machine settings.
• Ensure the right quality and quantity of raw material, processed mix etc are available and fed as required for production.
• Perform Daily and periodic test operation of machines, pumps, LPG systems as per the SOP.
• Fix minor issues that might occur during the shift, as well as refer issues to the competent technical teams, when the escalation thresholds are reached.
• Maintain production and activity logs as well as analyze trends.
• Maintain proper housekeeping and cleanliness of the equipment and workplace.
• Be a champion of Safety for self, others, equipment, and general workplace.
• Must be able to synergize with other Design Departments to achieve set goals.
• Accountability for assigned works with attention to detail is a must have.
• Must be able to work with minimum supervision.

Qualifications and Requirements

• Minimum of OND in Engineering or related field.
• Have at least a 3-years related process operator/ tank farm experience in an FMCG plant (preferably an Aerosol/insecticide manufacturing facility).
• Knowledge of LPG systems, pneumatic systems, and tank farm operations.
• Knowledge of aerosol supply system, pumps, as well as safety and fire suppression systems.
• Should have basic electrical knowledge and troubleshooting.
• Working knowledge of diverse high-speed machinery and measurement tools (caliper, micrometer etc.)
• Understanding of production procedures
• Adherence to health and safety regulations (e.g. constant use of protective gear)
• Ability to read blueprints, schematics, and manuals.
• Age: 23 - 35 years old.

Skills and Competencies:

• Good oral and written communication skills.
• Good teaming skills.
• Baseline problem analysis and solving skills.
• Creativity and an ability to think out of the box.
• Proficiency in the use of office productivity tools.

go to method of application »

Location: Ibadan, Oyo

Job Summary

• To carry out all types of repairs- (preventive maintenance and routine/ Autonomous interventions) on production packaging lines, processing equipment, utilities, and facilities.
• To implement this in accordance with manufacturer’s guidance/recommendation and safe operating procedures, to ensure optimum utilization and availability.

Responsibilities

• The incumbent should be able to oversee and drive maintenance of Aerosol manufacturing plant packaging, processing, and tank farm equipment.
• He/ she must be able to take responsibility of utility operations – ensuring smooth run, to deliver the right efficiency levels.
• He/ she should be able to leverage the combination of troubleshooting skills along mechanical, electrical, and general engineering skills to operate, monitor, maintain, report & sustain onsite utilities, LPG system and processing equipment.
• Maintain proper housekeeping and cleanliness of the equipment and workplace.
• Be a champion of Safety for self, others, equipment, and general workplace.
• Able to track, record, analysis, and schedule routine maintenance/repairs in line with TPM and WCM standards.
• Knowledge of HVAC, Plumbing and Fire suppression system and operations.
• Should be knowledgeable in the use of MS Office packages (Word, Excel, PowerPoint, Outlook)
• Must be able to synergize with other Design Departments to achieve set goals.
• Accountability for assigned works with attention to detail is a must have.
• Must be able to work with minimum supervision.

Qualifications and Requirements

• Minimum of HND in Engineering (Mechanical, Production, or industrial Engineering, or related field).
• Have at least a 3-years related job experience in maintenance/ machine operations (preferable in an Aerosol/insecticide manufacturing facility).
• Robust experience in handling LPG supply systems, tank farm operation and aerosol packaging machines as well as safety and fire suppression systems.
• Should be knowledgeable on general maintenance mechanics.
• Should have basic electrical knowledge and troubleshooting.
• Should have hydraulic/pneumatic and industrial troubleshooting experience.

Skills and Competencies:

• Knowledge of repair and maintenance of plant heavy equipment.
• Good oral and written communication skills.
• Good teaming skills.
• Baseline problem analysis and solving skills.
• Creativity and an ability to think out of the box.
• Proficiency in the use of office productivity tools.