Slickline Operator at Value Edge Management Service Limited

Key Responsibilities:

• Carry out tubing integrity investigation using a drift or gauge cutter run
• Ensure there is no hold-up or tight spot in tubing pressure testing
• Ensure all wax is cleared in the tubing to avert problems during the production of crude oil
• Install and remove gas lift valves and dummies to enhance the increase in oil production
• Install and retrieve plugs for well securing and well killing
• Ensure adequate sand bailing
• Install and retrieve FSE injection valve and SESSV (SESSV CHANGE OUT) to increase oil
• production and enhance the safety of oil well
• Carry out direct measurement of sand face pressure and time variation, temperature, and pressure
• storage effect, production index, porosity, and viscosity using electronic gauges
• Coordinate zone change for proper SSD opening
• Carry out all Slick line well intervention operations
• Assemble tools and perform Slick line services, i.e. gauge runs, pulling and setting plugs, etc. in
• various field locations
• Ensure the operations of Slick line services offered by the company are done safely and efficiently
• and according to established standards and guidelines
• Ensure all safety practices are implemented before, during and after the well-service operation
• Provide technical assistance to other field operation personnel on location to assure work is
• carried out according to set schedules and procedures. Maintenance, such as the removal of
• wax, scale, sand, and fill build-ups, terminating flow and setting hydraulic packers using sealing
• plugs, gauge cutting, setting or removing plugs, deploying or removing wireline, retrievable valves
• and memory logging of down-hole logs using Memory Production Logging Tools (MPLT) and
• down-hole vision (using run cameras).
• Control of sliding sleeves to open and close access to zones and the replacement of gas lift
• valves.
• Measure the depth of the well, well perforation (using run gun assemblies) and down-hole
• pressures and temperatures (using run gauges). 
• Write a report on activities on the field.

Qualifications:

• minimum of HND or B.SC. in any engineering field
• 3 years’ experience in Slick line operations
• Must have IWCF, BOSIET, etc
• Good computer proficiency (MS Office, Word, Excel)
• Slick Line Competency Certificate