Jobs Career Advice Signup
X

Send this job to a friend

X

Did you notice an error or suspect this job is scam? Tell us.

  • Posted: Jan 16, 2020
    Deadline: Not specified
    • @gmail.com
    • @yahoo.com
    • @outlook.com
  • Never pay for any CBT, test or assessment as part of any recruitment process. When in doubt, contact us

    Saipem S.p.A. (Società Anonima Italiana Perforazioni E Montaggi) is an Italian oil and gas industry contractor. It is a subsidiary of Italian energy company Eni, which owns approximately 43% of Saipem's shares. Saipem has contracted for designing and constructing several pipelines, including Blue Stream, Greenstream, Nord Stream and South Stream...
    Read more about this company

     

    Project Manager

    Job Ref: 402001
    Location: Nigeria

    Main Responsibility

    • Lead in Project planning and execution.
    • Company's focal point for project interface management with Clients, Licensors, Partners and Subcontractors.
    • Analyse and review contractual documents.
    • Implementation of methodologies for risk/opportunity and knowledge management.
    • Implementation of the project strategies and project activities planning (Project Execution Plan, Quality Plan, Procurement Plan, HSE Plan, Fabrication Plan, Installation Plan, etc.)
    • Approve and supervise planning and cost control activities, implement ing necessary corrective actions needed to achieve established project objectives.
    • Supervise engineering and procurement activities in-country and out-country.
    • Lead negotiation on variation orders and other commercial and contractual issues
    • Ensure collection of project feedbacks and issuance of project's final reports.

    Job Requirements and Minimum Required Experience

    • A Bachelor's degree or its equivalent in Science/Engineering or related discipline is required. A Master's degree is an added advantage but not a pre-requisite.
    • At least 15 years of relevant experience in Offshore Fabrication activities of which 5 years must have been at management level.
    • Excellent knowledge of construction and commissioning principles
    • Excellent project QHSE leadership skills
    • Knowledge of local statutory requirements for oil and gas project.
    • Excellent interpersonal relationship with customer focus.
    • Pre & post-tender contract management skills
    • Good knowledge of Engineering and Procurement systems/ methodologies

    go to method of application »

    Fabrication Project Manager

    Job Ref: 433001
    Location: Nigeria

    Main Responsibility

    • Plan and control production tools, equipment and personnel needed to execute fabrication activities.
    • Ensure coordination of all disciplines involved in works up to pre-commissioning I mechanical completion.
    • Manage and warehouse project material
    • Participate in defining production and maintenance plan.
    • Check production work progress, identifying any critical aspects and, where construction activities are subcontracted, requesting necessary actions from subcontractor.
    • Participate and lead in fabrication project planning and scheduling, liaising with the various functions involved in the execution of project.
    • Assist Commissioning Team during commissioning and start­ up phases.
    • Work jointly with HSE team in the preparation of project HSE Plan for construction and fabrication.

    Job Requirements and Minimum Required Experience

    • A Bachelor's degree or its equivalent in Engineering is required. A Master's degree is an added advantage but not a pre­ requisite.
    • At least 15 years of relevant experience in Offshore fabrication activities of which 5 years must have been at management level.
    • Excellent knowledge of Fabrication and Commissioning principles
    • Excellent QHSE leadership skills.
    • Excellent interpersonal relationship with customer focus.
    • Pre & post tender contract management skills
    • Cost management skills.
    • Good knowledge of Engineering and Procurement systems/ methodologies

    go to method of application »

    Project Quality Manager

    Job Ref: 136004
    Location: Nigeria

    Main Responsibility

    • Definition and implementation of the PQMS, identification, preparation and distribution of Project Quality Plans and procedures in accordance with the Company Quality Management System (QMS).
    • Plan and ensure Project Quality Control (QC) activities implementation
    • Ensure Company's QMS integrity is maintained in project execution.
    • Ensure implementation of Project QMS is checked and monitored through planning of quality audits.
    • Ensure implementation of planned quality audits, taking in account all project processes.
    • Lead in external audit issues for vendors and subcontractors QMS
    • Support Project Manager on issues of quality and interface with client and relevant  authorities' responsible for quality processes.
    • Ensure quality requirements are incorporated in contractual documents with vendors and subcontractors.
    • Analyze project  quality data  and  lead Project  Quality Management  Reviews.
    • Lead continuous  process   improvement  to  prevent  and eliminate potential  non-conformit ies and their causes

    Job Requirements and Minimum Required Experience

    • A Bachelor's degree or its equivalent in Engineering is required
    • At least 15 years of relevant experience in Project Quality Management  with 5 years spent as a Project Quality Manager.
    • Good knowledge Process analysis, redesign methods and procedure development
    • Knowledge of Project Quality audit activities
    • Knowledge of Quality Management  System  Knowledge fundamentals and ISO 9001
    • Knowledge of main Industry standards (ASTM, ASME, ACI, UPC, AWS,etc.)
    • Good knowledge of  project  management tools & methodologies
    • Client and contracts management skills
    • Knowledge of budgeting and controls

    go to method of application »

    Welding Supervisor

    Job Ref: 432173
    Location: Rivers

    Main Responsibility

    • Supervise execution of welding activities, checking that machineries and tools are properly used and maintained.
    • Prepare and coordinate the detailed programs for the assigned welding activities
    • Set-up the proper tools for the management of punch lists, producing adequate reports to monitor the status of the punch list points (open, closed, closure forecast dates)
    • Coordinate assigned team, managing interfaces with construction, engineering and commissioning team in closing out punch lists.
    • Organize work area for welding activities for improve HSE performance and overall efficiency.
    • Provide quantitative data for producing weekly progress reports.
    • Coordinate interfaces with prefabrication and erection activities

    Job Requirements and Minimum Required Experience

    • A Higher Diploma/Degree or its equivalent in Engineering is required.
    • At least 10 years of relevant experience in welding and Fabrication
    • Knowledge of main Industry standards (ASTM, ASME, ACI, UPC, AWS, etc.)
    • Knowledge of the welding processes for offshore/fabrication yard activities (GMAW, SAW, FCAW, PAW, SMAW)
    • Knowledge of different international codes/standards to develop and review Preliminary Welding Procedure Specification (PWPS) and Welding Procedure Specification (WPS).
    • Knowledge of mechanical and metallurgical testing to be performed during Procedure Qualification Record (PQR) execution and review
    • Knowledge of main ND methods and equipment.

    go to method of application »

    Cost Control Engineer

    Job Ref: 401004
    Location: Rivers

    Main Responsibility

    • Implementation of the cost control system, elaborating consolidated cost breakdown structure.
    • Issues project cost control procedure, cost coding manual and risk management plan.
    • Structuring commercial budget according to intercompany scheme, contract and work schedule.
    • Coordinate risk management activities and lead in brainstorming and qualitative I quantitative assessment of identified risks and opportunities
    • Ensure cost control system effectiveness and cost status is assessed and reported.
    • Monitor progress of activities and earned value.
    • Provide support during contract changes/claims process, providing cost impact analysis, and keeping cost/revenues forecast updated
    • Analyse costs and activities to-date, review estimate to complete, isolating any deviation from baselines; providing advisory and supports Project manager.
    • Maintain risk management process, organizing periodic meetings and verifying risk owners.
    • Supports Project Control Manager in preparing Project close­ out report and cost feed-back data to Project Control and Commercial Departments.

    Job Requirements and Minimum Required Experience

    • A Higher  Diploma / Degree or its equivalent in Science /Engineering is required.
    • At least 8 years of relevant experience in Project Control and Cost management
    • Knowledge of international and national accounting standards and principles
    • Knowledge of Contract Management and Commercial Processes (contract evaluation, negotiation and proposal)
    • Knowledge of WBS CBS implementation process.
    • Knowledge of cost control, planning and document control tools, structure and management Knowledge of SAP

    go to method of application »

    Welding Engineer

    Job Ref: 426202
    Location: Rivers

    Main Responsibilities

    • Prepare and  issue  preliminary welding documents for project
    • Review client's specifications and scopes of work, examine pipe metallurgy and prepare detailed welding procedures
    • Coordinate and schedule personnel and systems for qualification of welding procedures and welders.
    • Ensure welding traceability information are recorded, maintained and made available in the required format for welding activities.
    • Prepare and issue welding documents (Welding Books, WPSs, WPQR, PTW report, Procedures, etc.)
    • Monitor Welding Quality through the analysis of the trends of project defect rates and Welders defect rates; proposing corrective and improvement processes.
    • Supports welding coordinator and/or project teams on all welding matters
    • Evaluate and estimate type and quantity of welding consumables.
    • Maintain updated departmental project welding files and database

    Job Requirements and Minimum Required Experience

    • A Bachelor's degree or its equivalent in Mechanical / Metallurgy / Chemical Engineering is required.
    • At least 7 years of relevant experience in welding engineering and quality management.
    • Knowledge of the principles of corrosion and corrosion control methodologies
    • Knowledge of main applicable Industry materials selection and corrosion control international standards and codes (such as NACE, API, ISO, NORSOK, DNVGL, etc.)
    • Knowledge of Standards, Regulation and Codes for Engineering Criticality Assessment (ECA) and Fitness for Service (FFS).
    • Knowledge of the Fatigue Analysis principles and testing methods.
    • Knowledge of mechanical properties of metals and standard testing
    • Knowledge of the principles of metallurgy and materials science.
    • Detailed knowledge of NDT Engineering (Specific knowledge of advanced technologies (PA-UT, TOFD, TFM/FMC, Digital RT, etc.)
    • Knowledge and interpretation of international codes, client's specification and acceptance criteria 

    go to method of application »

    Assets Maintenance Engineer

    Job Ref: 442007
    Location: Rivers

    Main Responsibilities

    • Ensure equipment classification for project
    • Ensure efficient maintenance planning and identify required resources for activities
    • Ensure setup of maintenance system for new assets
    • Prepare KPI with regard to maintenance activities.
    • Supports asset planning and ensure maintenance cycles improvement
    • Ensure training of maintenance operators and manage issues of assets audit.

     Job Requirements and Minimum Required Experience

    • A Higher Diploma / Degree or its equivalent in Engineering is required.
    • At least 8 years of relevant experience in Assets management and maintenance
    • Knowledge of tool and software for assets maintenance and management.
    • Knowledge and application of preventive maintenance techniques.
    • Knowledge of spare parts management, client supply chain workflow (PR/ PO/ requisition, FAT/SAT, etc.) and warehouse management principles.
    • Knowledge of lifting equipment working principles and specific criticalities for cranes, davits, frames, and various lifting devices.
    • Knowledge stock management
    • Knowledge of  Maritime  Laws and  regulations  Management System (ISM, ISPS, MLC2006)
    • Knowledge of adequate Personal Protective Equipment - purpose, use and maintenance
    • Knowledge of permit  to work system

    go to method of application »

    Production Planner

    Job Ref: 433012
    Location: Rivers

    Main Responsibility

    • Plan production activities according to project schedule and availability of drawings, materials and personnel.
    • Set up and   maintain cumulative project workload
    • Manage project materials, production feed and production plan.
    • Prepare and estimate feasible WorkPacks for production
    • Set up and maintain fabrication databases (material utilization factors, productivity)
    • Validate and analyse production feedback in respect to progress, productivity, spent hours and materials, ensuring traceability and final reconciliation

     Job Requirements and Minimum Required Experience

    • A Bachelor's degree or its equivalent in Engineering is required.
    • At least 8 years of relevant experience in fabrication production project planning.
    • Good knowledge of warehouse management
    • Knowledge of project technical documents
    • Knowledge of fabrication Engineering.
    • Good knowledge of fabrication and installation techniques
    • Good knowledge of  project  management  tools  &risk management techniques
    • Knowledge of SAP and other relevant production planning tools.

    go to method of application »

    Pre-Fabrication Superintendent - (2000001J)

    Job ID: 433112
    Location: Rivers

    Main Responsibilities

    • Manage execution and welding of structural prefabrication, piping prefabrication, piping supports pre-fabrication, appurtenances prefabrication and elementary assembly
    • Coordinate workshop support activities (lifting and handling)
    • Ensure welding activities and non-destructive controls are carried appropriately.
    • Ensure consumables deployed for fabrication are in compliance with required quality procedures and standard.
    • Ensure proper discipline workflow, interfacing with project organization and client.
    • Interface with Asset unit for equipment maintenance and repairs.
    • Provide information regarding work progress indicating any variation.deviations and suggesting corrective actions.
    • Control production parameters in terms of efficiency and productivity.

    Job Requirements and Minimum Required Experience

    • A Bachelor's degree or Higher Diploma in Engineering is required.
    • At least 15 years of relevant experience in Offshore fabrication activities of which 5 years must have been at Supervisory level.
    • Project production planning
    • Good knowledge of welding engineering and techniques.
    • Good knowledge of quality control activities.
    • Fabrication engineering project management.
    • Knowledge of steel materials

    go to method of application »

    Maintenance and Inspection Manager - (2000001W)

    Job ID: 0442007
    Location: Rivers

    Main Responsibilities

    • Ensure proper planning, utilization and Assets availability.
    • Plan and conducts physical inspections on Assets and inventories.
    • Provide technical support on Asset management
    • Ensure lifting equipment certification scheduling and renewal
    • Control planning and fixed Asset utilization.
    • Ensure management fixed fabrication equipment, lifting gears, and fixed infrastructures.
    • Schedule and ensure Assets and  Equipment overhauls/maintenance and co-ordinate their implementation
    • Manage inspections and maintenance activities on machineries and equipment while respecting fabrication schedule
    • Effective implementation of inspections and maintenance plan.

    Job Requirements and Minimum Required Experience

    • Degree or its equivalent in Engineering is required.
    • At least 15 years of relevant experience in Assets Management and Maintenance
    • Knowledge of tool and software for assets maintenance and management.
    • Knowledge and application of  preventive  maintenance techniques.
    • Knowledge of spare parts management, Client Supply Chain Workflow (PR/ PO/ requisition, FAT/SAT, etc.) and warehouse management principles.
    • Knowledge of lifting equipment working principles and specific criticalities for cranes, davits, frames, and various lifting devices.
    • Knowledge stock management
    • Knowledge of  Maritime  Laws  and  regulations  Management System (ISM, ISPS,MLC2006)
    • Knowledge of adequate Personal Protective Equipment  - purpose, use and maintenance
    • Knowledge of permit to work system
    • Knowledge of Quality Management System fundamentals and IS09001

    go to method of application »

    Fab Yard Mechanical Completion Co-ordinator

    Job Ref: 433008
    Location: Rivers

    Main Responsibilities

    • Review contractual documentation for mechanical completion issue and identify project requirements & constraints on installation and mechanical compl.
    • Lead in project planning  &  scheduling for mechanical completion and installation activities.
    • Prepare and keep up-to-date mechanical completion execution plans
    • Supervise I coordinate the preparation of the test pack (mechanical completion dossier)
    • Supervise coordinate the preparation of the Mechanical Completion procedure, preparation of all checklists and relevant check sheets.
    • Participate in preparing Project HSE Plan for  mechanical completion activities
    • Manage and categorize punch list in coordination with other functions engineering/construction/client/quality/hookup/ pre­ commissioning/ commissioning)
    • Supervise coordinate, check and test completeness and quality of fabrication in accordance with design documentation and specifications.
    • Define and review mechanical  completion consumables  and materials

     Job Requirements and Minimum Required Experience

    • A Bachelor's degree or its equivalent in Engineering is required.
    • At least 15 years of relevant experience in Offshore fabrication and mechanical completion activities of which 5 years must have been at the level of coordination of Mechanical and Installation activities.
    • Project HSE Management
    • Project production plan
    • Good knowledge of quality control activities
    • Knowledge of fabrication Engineering and project management.
    • Good knowledge of fabrication and installation techniques
    • Good knowledge of project  management tools & methodologies

    Method of Application

    Build your CV for free. Download in different templates.

  • Send your application

    View All Vacancies at Saipem Contracting Back To Home

Subscribe to Job Alert

 

Join our happy subscribers

 
 
Send your application through

GmailGmail YahoomailYahoomail