Technicians at Afordonz Limited

Job Role Summary

• The successful candidate would be responsible for implementing and maintaining a Preventive Maintenance Program for all equipment and systems pertaining to his field/area of specialization.
• He performs the monthly Facility Inspection and submits all required reports to the Site Manager, as well as maintaining routine and required inspections of the relevant Systems.

Job Duties

• Carry out routine inspections and make modifications to IC engines, diesel generators, and associated equipment.
• Perform preventive and corrective maintenance on Automatic Transfer Switches (ATS) and annunciator panels.
• Perform load testing on units to identify possible problems and prevent wet stacking.
• Make electrical and mechanical wiring modifications to diesel control circuits.
• Rebuild and repair gas compressors (turbochargers) used for forced-induction of IC engines, head gaskets, seals, water pumps, catalytic converters, torque heads, belts and hoses.
• Conduct automatic and manual transfer tests of simulated power outages to ensure generators are functioning properly.
• Test batteries, fuel coolant, and oil; ship oil samples for analysis.
• Basic electrical, mechanical, thermal, and hydraulic principles and practices.
• Knowledge of Engine Control systems and other program logic controls that are associated with IC power generation.
• Must have knowledge of Electrical and mechanical safety procedures.
• Natural Fire Protections Codes, Lockout/tagout Procedures.
• Good knowledge of IC Diesel and other gaseous IC engines.
• Technique in tracking, transporting, and disposing hazardous materials.
• Rigging standards and principles of safe and efficient methods for handling heavy objects.

Qualifications

• The ideal candidates should meet the above requirement and have at least an OND or its equivalent with a minimum of 5 years experience in Electrical Installation.

go to method of application »

Job Role Summary

• The successful candidate would be responsible for implementing and maintaining a Preventive Maintenance Program for all equipment and systems pertaining to his field/area of specialization.
• He performs the monthly Facility Inspection and submits all required reports to the Site Manager, as well as maintaining routine and required inspections of the relevant Systems.

Responsibilities

• Able to maintain electrical control panels.
• Must know and be able to follow processes of testing and inspecting of electrical equipment, control systems and installations.
• Install, wire and connect electrical equipment and control system. Carry out repairs and corrective maintenance without need for rework.
• Interprets and works from Technical plans and drawings.
• Proffer effective solutions to identified or reported problems.
• Troubleshoot and detect faults correctly and readily proffer right solutions.
• Maintain a safe and clean environment during and after work.
• Identify correct PPE to use for different tasks, wear prescribed PPE at all times required and keep these in good condition.
• Know and follow processes for preventive maintenance of assigned equipment and carries this out with minimal supervision.
• Able to identify and use the right tools appropriately. No record of missing or destroyed tools due to staff negligence.
• Follow attendance policy as assigned by supervisor
• Follow all rules, regulations and policies of organization and directives from superiors
• Perform other functions as may be assigned by the department or supervisor

Qualifications

• The ideal candidates should meet the above requirement and have at least an OND or its equivalent with a minimum of 5 years experience in Electrical Installation.

go to method of application »

Job Role Summary

• The successful candidate would be responsible for implementing and maintaining a Preventive Maintenance Program for all equipment and systems pertaining to his field/area of specialization.
• He performs the monthly Facility Inspection and submits all required reports to the Site Manager, as well as maintaining routine and required inspections of the relevant Systems.

Job Duties

• Comply with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area.
• Repair or replace defective equipment, components, or wiring, test electrical circuits and components for continuity, using electrical test equipment.
• Inspect and test system to verify system compliance with plans and specifications and to detect and locate malfunctions.
• Discuss heating-cooling system malfunctions with users to isolate problems or to verify that malfunctions have been corrected.
• Record and report all faults, deficiencies, and other unusual occurrences, as well as the time and materials expended on work orders.
• Study blueprints, design specifications, and manufacturers recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
• Test pipe or tubing joints and connections for leaks, using pressure gauge or soap-and-water solution.
• Adjust system controls to setting recommended by manufacturer to balance system, using hand tools.
• Recommend, develop, and perform preventive and general maintenance procedures such as cleaning, power-washing and vacuuming equipment, oiling parts, and changing filters.
• Install auxiliary components to heating-cooling equipment, such as expansion and discharge valves, air ducts, pipes, blowers, dampers, flues and stokers, following blueprints.
• Install, connect, and adjust thermostats, humidistats and timers, using hand tools.

Qualifications

• The ideal candidates should meet the above requirement and have at least an OND or its equivalent with a minimum of 5 years experience in Electrical Installation.

go to method of application »

Job Role Summary

• The successful candidate would be responsible for implementing and maintaining a Preventive Maintenance Program for all equipment and systems pertaining to his field/area of specialization.
• He performs the monthly Facility Inspection and submits all required reports to the Site Manager, as well as maintaining routine and required inspections of the relevant Systems.

Job Duties

• Assemble pipe sections, tubing and fittings, using couplings, clamps, screws, bolts, cement, plastic solvent, caulking, or soldering, brazing and welding equipment.
• Fill pipes or plumbing fixtures with water or air and observe pressure gauges to detect and locate leaks.
• Review blueprints and building codes and specifications to determine work details and procedures.
• Prepare written work cost estimates and negotiate contracts.
• Study building plans and inspect structures to assess material and equipment needs, to establish the sequence of pipe installations, and to plan installation around obstructions such as electrical wiring.
• Keep records of assignments and produce detailed work reports.
• Perform complex calculations and planning for special or very large jobs.
• Locate and mark the position of pipe installations, connections, passage holes, and fixtures in structures, using measuring instruments such as rulers and levels.
• Measure, cut, thread, and bend pipe to required angle, using hand and power tools or machines such as pipe cutters, pipe-threading machines, and pipe-bending machines.
• Install pipe assemblies, fittings, valves, appliances such as dishwashers and water heaters, and fixtures such as sinks and toilets, using hand and power tools.
• Cut openings in structures to accommodate pipes and pipe fittings, using hand and power tools.

Qualifications

• The ideal candidates should meet the above requirement and have at least an OND or its equivalent with a minimum of 5 years experience in Electrical Installation.