Latest Jobs at Dangote Group

Location: Obajana Plant, Obajana Plant, Nigeria

Job Summary

The Refractory Mason at Dangote Cement Plc is repsonsible for carrying out installation, maintenance, and repair of refractory linings in kilns, furnaces, and other high-temperature equipment to ensure optimal plant performance, safety, and operational efficiency.

Key Duties and Responsibilities

• Install refractory bricks, castables, and insulation materials in kilns, cyclones, preheaters, and related equipment.
• Ensure proper alignment, spacing, and thickness in line with technical specifications.
• Carry out anchoring and lining activities as required.
• Inspect refractory linings for wear, cracks, and damage.
• Remove defective refractory materials and replace with new installations.
• Perform patching and emergency repairs during plant operations and shutdowns.
• Prepare surfaces prior to installation (cleaning, leveling, etc.).
• Mix and apply refractory materials (castables, mortar, gunning mixes).
• Ensure proper curing and drying of installed materials.
• Conduct routine checks to ensure integrity of refractory linings.
• Adhere strictly to installation procedures and manufacturer specifications.
• Report defects and recommend corrective actions.
• Follow all plant safety procedures and use appropriate PPE.
• Work safely in high-temperature and confined environments.
• Maintain good housekeeping of work areas.
• Provide feedback on work completed and materials used.
• Support supervisors in tracking maintenance activities and shutdown work.

Requirements

• Minimum of Trade Test Certification.
• At least 3–5 years experience as a Refractory Mason in a cement plant or heavy industrial environment.
• Proven experience working on kilns, furnaces, or similar high-temperature equipment.
• Strong knowledge of refractory materials and installation techniques.
• Ability to read and interpret basic technical drawings.
• Good physical strength and stamina.
• Attention to detail and quality workmanship

go to method of application »

JOB SUMMARY

Establish and lead an integrated project controls function across the EPC/construction portfolio, covering end-to-end planning, cost management, progress tracking, risk and change control, forecasting, and executive-level (CEO) performance reporting to ensure accurate, timely, and decision-ready project insights. 

Key Duties and Responsibilities

• Establish and govern the Integrated Master Schedule (IMS) across all projects, including critical path analysis, look‑ahead planning, and validation of recovery and acceleration plans.
• Lead enterprise‑wide cost control, including budget management, commitments, cash‑flow forecasting, cost‑to‑complete, and earned value management (EVM).
• Define and enforce standardised progress measurement systems across engineering, procurement, construction, commissioning, and handover phases.
• Develop and maintain portfolio‑level dashboards, KPIs, and performance reports, ensuring data integrity, reporting discipline, and executive readiness.
• Prepare CEO and Board review packs, translating complex project data into clear insights, risks, trends, and decision recommendations.
• Own and govern risk registers, issue logs, change control, and trend management, ensuring early identification and mitigation of project risks.
• Interface closely with Commercial and Contracts teams on early‑warning notices, claims evaluation, and substantiation or defence of contractual positions.
• Provide independent challenge to project teams and contractors by scrutinising progress claims, forecasts, recovery plans, and cost assumptions.
• Establish and uphold project controls standards, methodologies, and governance frameworks across Dangote Construction.
• Build and lead project controls capability, ensuring consistency, discipline, and performance excellence across the project portfolio.

Key Requirements

Education and Work Experience

• Bachelor’s degree in engineering, Construction Management, Quantity Surveying, Project Management, Finance, Cost Management or related discipline. Equivalent HND may be considered with exceptional major-project controls leadership experience.
• Professional certification preferred: AACE CCP / CEP / EVP / PSP, PMI-SP, PMI-RMP, PMP, PRINCE2 Practitioner or equivalent recognized project controls credential.
• Advanced competency in Primavera P6 is mandatory. Strong Excel capability is mandatory. Power BI or equivalent dashboarding capability is strongly preferred.
• Strong command of EPC / construction contracting, baseline control, progress measurement, cost forecasting, change control and claims-sensitive documentation.
• Minimum 18 years project controls experience in EPC, EPCM, PMC, construction, industrial, infrastructure, energy, cement, refinery, power, port, rail, roads or large building programs.
• Minimum 8 years leading project controls teams, preferably across a portfolio or multi-project environment rather than a single-site-only role.
• Proven experience creating or recovering controls systems from low-maturity environments, including WBS, CBS, coding structures, reporting calendars and data-quality rules.
• Track record in executive reporting, monthly project reviews, schedule recovery analysis, cost-to-complete reviews and contractor performance challenge.

Functional Competencies

• Experience on industrial plants, refinery, petrochemical, cement, power, ports, infrastructure or large civil / building programs.
• Forensic planning, delay analysis, extension-of-time analysis, disruption analysis or claims-defense experience.
• Experience with SAP, Oracle, EcoSys, Aconex, Primavera Unifier, MS Project Server, Power BI, Tableau or comparable enterprise systems.
• Prior owner / client-side controls leadership experience in addition to EPC contractor experience.
• Ability to design a practical controls organization, reporting calendar and governance model for a Lagos-led project portfolio

go to method of application »

Job Summary

Design software solutions by studying requirements analysis and information needs; conferring with stakeholders and IT Management; studying systems flow, data usage, and work processes; supporting Intranet sites built on SharePoint with experience in Power Apps & Power Automate; Manages system security, system patching and upgrade.

Key Duties and Responsibilities

• Implement application development requirements, with a constant focus on coordinating business efficiencies through the activities of application development.
• Design, develop and maintain key components of the software suite using .NET framework or SharePoint platform, with integration with various systems (SAP, etc)
• Implementation workflows as well as development of Business Intelligence dashboards
• Document and demonstrate solutions by developing documentation, flowcharts, layouts, diagrams, charts, code comments and clear code.
• Coordinate and participate in system unit testing and integration testing, while promoting good practice and code standards
• Build user manuals and provide training to end users
• Perform support and maintenance activities (bug fixing, enhancements)
• Deploys custom-developed and third-party SharePoint solution packages
• Manages site quotas and file size limits, reviews and monitors usage reports.
• Manages content databases and creates new ones as required
• Administers and maintains sites and sub-sites
• Manages security for sites and sub-sites

Key Requirements

Education

• Master’s degree or equivalent in computer science or software development.

Experience

• Minimum 5 years of experience in supporting and maintaining SharePoint in an enterprise environment
• Mastering of .NET technology (C#, VB.Net), MVC architecture ▪ Mastering of HTML/HTML5, CSS/CSS3, JavaScript and JavaScript Frameworks (JQuery, AngularJS, ReactJS), REST Web Services, OData,

Functional/Technical Competencies

• C# (Webapp, desktop app), services, libraries, REST, APIs, jQuery
• O/RMs (Object Relational Mapper, Entity Framework)
• JavaScript, HTML 5, CSS, C#, .NET, Custom Workflows, Custom Web parts, Site Collections
• MVC Framework knowledge, PHP + MySQL Stack, Jquery & Javascript Framework, Object Oriented Programming
• Testing (Unit, Integration, Load) & Documentation (Software Processes, etc.)
• Power Automate and Power Apps skills.

go to method of application »

JOB SUMMARY

Provide engineering assurance and technical leadership across EPC/PMC/construction delivery, ensuring effective multidisciplinary integration and disciplined design management. Act as a technical authority to uphold engineering standards, support delivery performance, and ensure safe, fit-for-purpose, and high-quality project execution across all phases.

KEY DUTIES & RESPONSIBILITIES

• Provide overall technical leadership and engineering governance across all projects, ensuring design assurance, discipline integration, constructability, value engineering, and effective resolution of technical interfaces.
• Establish and enforce engineering management systems, including design review gates, deliverable registers, technical query (TQ) processes, document review cycles, design‑change control, and lessons‑learned frameworks.
• Lead risk‑based engineering decision‑making under schedule and commercial pressure, while maintaining strict adherence to safety, quality, statutory, and regulatory requirements.
• Oversee engineering inputs across the project lifecycle, ensuring seamless coordination between engineering, procurement, construction, commissioning, and handover teams.
• Ensure strong vendor and contractor document review discipline, including equipment data sheets, drawings, calculations, and interface alignment with project requirements.
• Drive constructability and operability reviews, ensuring designs are practical, cost‑effective, and aligned with construction sequencing and commissioning strategies.
• Manage technical risk identification and mitigation, proactively addressing design, interface, and execution risks that could impact cost, schedule, or quality.
• Provide authoritative oversight on technical deviations, concessions, and change impacts, ensuring decisions are technically sound and commercially informed.
• Build, mentor, and lead discipline engineering leads, developing internal capability while effectively leveraging external engineering consultants and partners.
• Establish and grow a Lagos‑led engineering assurance function, positioning Dangote Construction with a sustainable, high‑quality in‑house engineering capability.

KEY REQUIREMENTS

Education and Work Experience

• Bachelor’s degree in a relevant engineering discipline, such as Civil, Structural, Mechanical, Electrical, Instrumentation & Control, Chemical, Process, Industrial or related field. Master’s degree or MBA preferred.
• Professional engineering registration required or strongly preferred depending on sign-off authority: COREN registration for Nigeria-based engineering practice or recognized international Chartered Engineer / Professional Engineer credential with eligibility for Nigerian recognition.
• Strong knowledge of international codes and standards relevant to project scope, such as API, ASME, ASTM, IEC, IEEE, NFPA, BS / Eurocodes, ISO and discipline-specific design standards.
• Demonstrated technical authority, design review, design-change control, constructability and engineering risk-management capability.
• Minimum 20 years engineering and design-management experience on major capital projects, EPC, EPCM, PMC, owner-engineering or construction-support organizations.
• Minimum 10 years leading multidisciplinary engineering teams or engineering managers across civil / structural, mechanical, piping, electrical, instrumentation, process, systems and construction-support interfaces.
• Proven track record across FEED, detailed engineering, design reviews, vendor design review, technical queries, interface management, change control and construction technical support.
• Experience managing external design consultants, EPC engineering centres, licensors, vendors and contractor engineering interfaces.

Functional Competencies

• Process plant, refinery, petrochemical, cement, power, ports, marine works, industrial infrastructure, roads, utilities or large building engineering experience.
• Prior owner-engineer or technical-authority role in addition to EPC contractor / design-consultant experience.
• Experience with EDMS platforms, BIM / 3D model review, Aconex, Navisworks, SmartPlant, AVEVA, Revit, Civil 3D or comparable engineering delivery systems.
• Experience managing international engineering centres and reconciling international design output with Nigerian site conditions, codes, permits and construction realities.
• Senior professional status such as COREN Registered Engineer, MNSE / FNSE, Chartered Engineer, Professional Engineer or equivalent recognized credential.

go to method of application »

Location: Ibese Plant, Ibese Plant

Department: Production

Reports To: Sectional Head, Material Handling

Job Summary 

We are seeking skilled and safety-conscious CNG Truck Drivers to manage the inbound logistics of raw materials in our cement manufacturing plant. They will be responsible for safely operating heavy-duty CNG-powered trucks, ensuring the timely delivery of materials, and strictly adhering to all traffic and environmental regulations.

Key Duties & Responsibilities

• Safe transportation of raw materials to designated areas.
• Conduct pre-trip and post-trip inspections of the CNG fuel system, engine, and trucks. Monitor gas pressure levels and report   any mechanical faults immediately.
• Adhere to all Federal Road Safety Corps (FRSC) regulations, speed limits, and strict plant safety protocols ( Dangote Group site safety standards if operating within these networks).
• Implement defensive driving and eco-driving techniques to maximize CNG efficiency and minimize carbon emissions.
• Maximize the fuel efficiency benefits of the CNG engine by practicing smooth acceleration, engine braking, and minimizing unnecessary idling.
• Safely connect, monitor, and disconnect high-pressure CNG fuelling lines. Perform standard safety checks on fuel cylinders, valves, and pressure gauges before and after trips.
• Maintain strict adherence to scheduled Turnaround Times (TAT), maximizing daily trips while ensuring total compliance with legal axle weight limits to prevent equipment strain and legal penalties

Key Requirements

Academic / Professional Qualifications

•  Minimum of SSCE Certificate
•  Valid Nigerian Class G Heavy Truck Driver’s License.
•  Clean driving record with no history of major vehicular accidents.
•  Excellent spatial awareness, basic mechanical troubleshooting, and strong communication skills.

Work Experience

• Minimum of 1–3 years of experience driving heavy-duty articulated trucks, specifically within the Nigerian cement, mining, or heavy manufacturing sector.

Benefits

• Private Health Insurance
• Paid Time Off
• Training & Development
• Career Development Opportunities

go to method of application »

Location: Obajana Plant, Obajana Plant, Nigeria

Job Summary

We are looking for a Sectional Head to join our Instrumentation team. The ideal candidate will be responsible for the overall Instrumentation activities of the Cement Mills & Additive transport, implementation of instrumentation engineering and maintenance policies with company policies and procedures to ensure optimal plant availability for production.

Key Duties and Responsibilities

• Review Cement Mills & Additive Transport, instrumentation equipment’s maintenance projections and schedules.
• Ensure that equipment preventive maintenance programs implemented as per agreed schedule.
• Monitor the effectiveness of the programs, maintenance reworks and makes recommendations.
• Enforce standards and safe work procedures for the Cement Mills & Additive Transport and ensure regulations relating to the instrumentation department met at all times in Cement Mills & Additive transport.
• Provide training development and leader ship to Cement Mills &Additive transport, instrumentation personnel.

Requirements

• Bachelor degree or its equivalent in Electrical & Electronics Engineering or related discipline.
• Minimum of Fifteen (15) years demonstrated operating experience in maintenance practices, three years of which must in management position.
• In-depth knowledge of Cement Mills & Additive Transport, operation and maintenance.
• In-depth knowledge of VRM system operation and maintenance.
• In-depth knowledge of MV &LV drives operation and maintenance.