Jobs at DWC & Engineering Services Limited

Service Description

• Promote Goal Zero Safety and Quality culture and drive compliance at the worksite.
• Enforce IOGP HSE policies and procedures at Company worksites.
• Review and provide input to technical specification documents, P&IDs, and other detailed engineering documents for subsea control systems and other interfacing systems.
• Respond to Subsea Control and Distribution related queries and technical clarification questions from contractor.
• Ensure the manufacturing/fabrication of MCS (Master Control System), EPU (Electrical Power Unit), HPU (Hydraulic Power Unit), EJB, TUPA, SCMs, Hardware Mounted Controls, and associated transportation, storage, and installation aids comply with project specifications, procedures, design documents, and approved Inspection and Test Plan (ITP) and validation through testing. Ensure appropriate witness, review, and approvals by Company representatives per approved project inspection and test plans.
• Participate in Design Reviews, Technical Workshops, HAZID, HAZOPs, and other meetings/reviews as assigned in the Scope of Work.
• Ensure safe, timely, and efficient execution and drive progress of work scope based on the project schedule.
• Witness fabrication, assembly, and manufacturing activities at the Fabrication Site and confirm compliance with the approved procedure.
• Witness site activities including Site Receipt Inspection, Site Integration, Factory Acceptance Test, Extended Factory Acceptance Test, and System Integration Test and confirm compliance with the approved procedure.
• Work with the Contractor to ensure quality issues are properly identified, documented, reported, and timely dispositioned.
• Author and deliver daily, weekly, and monthly status, progress, and site reports.
• Oversee materials/goods receipt, inspection, and verification checks and reporting.
• Coordinate readiness and execution of integration tests across packages/disciplines.
• Review and provide input to Assembly and Testing Procedure, storage and preservation, Transportation Handling Instruction, Installation, and offshore Testing Procedure.
• Ensure Materials Record Book (including Certificates of Conformance and other technical documentation) is available prior to loadout of equipment.
• Coordinate logistics at the Local Fabrication Site for timely packaging and transportation of equipment to the quayside and safely load-out to installation/transportation vessel.
• Liaise with Company’s Lifting and Hoisting SME (Subject Matter Expert) to review lift plans, rigging registers, and support safe lifting operations.
• Supervise offshore installation, testing, pre-commissioning, and commissioning of the subsea control systems.
• Liaise with Project Engineers responsible for delivery of other packages within the project (e.g., Distributed Control System, Electrical systems, topsides piping and structures) to successfully manage interfaces and drive compliance with project requirements.
• Coordinate meetings and design reviews with contractor engineers and technicians and report outcomes.
• Liaise with internal stakeholders (e.g., Quality, HSE, project control, engineering disciplines, planning, Information & Digital Technology, Bonga asset & operations, Wells, marine, logistics, planning, aviation, subsea intervention) to ensure adequate support for project execution.
• Log and track lessons learned during the detailed design and manufacturing activities within the Package.
• Review operation and maintenance manuals and guidelines issued by the contractor.
• The service will involve work and travel to fabrication sites, OEM facilities, and offshore vessels in the Gulf of Guinea.

Requisite Qualifications

• Minimum of Bachelor’s Degree in Electrical, Mechanical, or Subsea Engineering with professional registration.
• Minimum of 15 years work experience with at least 10 years of relevant experience in designing, installing, or upgrading automation and control systems within the oil and gas industry with a focus on Deepwater.
• Good understanding and practical application of Industry standards and codes (API 17F / ISO 13628-6, API 17H, API RP 17N, ASME B31.3, ASME IX, IEC 60287).
• Practical experience in working with subsea control systems OEMs.
• Practical experience in developing subsea control specifications and datasheets.
• Ability to communicate, work, interface, interact, and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.
• Demonstrable project management experience, possibly with certifications if applicable.
• Knowledge in the use of MS Office tools or similar software.

go to method of application »

Service Description

• Promote Safety culture and drive Goal Zero compliance at the worksite.
• Ensure Materials Record Book (including Certificates of Conformance and other technical documentation) are available prior to loadout of equipment.
• Liaise with EPC-3’s logistics team at the Local Service Base to support timely and safe loadout of equipment and transportation to the quayside.
• Review and provide input to Assembly and Testing Procedure, Transportation Handling Instruction, Installation, and Testing Procedure.
• Liaise with Company’s Lifting and Hoisting representative to review lift plans, rigging registers, and support safe lifting operations.
• Supervise activities at the EPC-3 Local Service Base and confirm compliance with the approved procedure. Activities include, but are not limited to, Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance Test, and System Integration Test.
• Work with EPC-3’s team to ensure quality issues are properly identified, documented, and timely dispositioned.
• Collaborate with EPC-3’s Workshop, Planning, QC, Warehouse, and other support teams during the execution of the Tree scope to drive compliance with project requirements and agreed schedule and key dates.
• Responsible for safe and efficient execution of work scope and drive its timely completion, per contract and procedures.
• Liaise with internal stakeholders (e.g., project, asset & operations, Wells, marine logistics, geomatics, aviation, diving, etc.) to ensure adequate support for project execution.
• Provide daily reports of activities at the EPC-3 Local Service Base located in Onne.
• The service will involve work and travel to fabrication sites, OEM facilities, and offshore vessels in the Gulf of Guinea.

Requisite Qualifications

• Minimum of Bachelor’s Degree in Engineering with professional registration.
• Minimum of 10 years relevant experience in assembly, testing, and installation of Deepwater Subsea trees and offshore construction.
• Ability to communicate, work, interface, interact, and influence effectively within a multi-disciplinary team of professionals located globally.
• Practical experience in working with OEM technicians and engineers to resolve technical issues.
• Practical experience in managing Christmas tree interface information.
• Good understanding and practical application of Industry standards and codes (API 6A, 17D, 17H, etc.).
• Ability to develop Tree functional specifications and datasheets, and conduct engineering design reviews.
• Knowledge in use of MS Office tools or similar software.

go to method of application »

Service Description

• Promote Goal Zero Safety and Quality culture and drive compliance at the worksite.
• Enforce IOGP (International Oil and Gas Producers) HSE (Health Safety and Environment) policies and procedures at Company worksites.
• Review and provide input to technical specification documents, P&IDs, and other detailed engineering documents for subsea distribution systems and other interfacing systems.
• Respond to Subsea Control and Distribution related queries and technical clarification questions from the contractor.
• Ensure the manufacturing/fabrication of Umbilical Termination assembly (UTA), Hydraulic Distribution Manifold (HDM), Electrical Distribution Manifold (EDM), Umbilical Termination Heads (UTH), Umbilical Termination Assembly Jumpers (UTAJ), Electrical and Hydraulic Flying Leads, and associated transportation, storage, and installation aids comply with project specifications, procedures, design documentation, and approved Inspection and Test Plan (ITP) and validation through testing. Ensure appropriate witness, review, and approvals by Company representatives per approved project inspection and test plans.
• Responsible for safe, timely, and efficient execution and drive progress of work scope based on the project schedule.
• Witness fabrication, assembly, and manufacturing activities at the Fabrication Site and confirm compliance with the approved procedure.
• Witness site activities including Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance Test, and System Integration Test, and confirm compliance with the approved procedure.
• Work with the contractor to ensure quality issues are properly identified, documented, reported, and timely dispositioned.
• Author and deliver daily, weekly, and monthly status, progress, and site reports.
• Oversee materials/goods receipt, inspection, and verification checks and reporting.
• Coordinate readiness and execution of integration tests across packages/disciplines.
• Review and provide input to Assembly and Testing Procedures, storage and preservation, Transportation Handling Instructions, Installation, and Offshore Testing Procedures.
• Ensure Materials Record Book (including Certificate of Conformance and other technical documentation) is available prior to loadout of equipment.
• Coordinate logistics at the Local Fabrication Site for timely packaging and transportation of equipment to the quayside and safely load-out to installation/Transportation vessel.
• Liaise with Company’s Lifting and Hoisting SME (Subject Matter Expert) to review lift plans, rigging registers, and support safe lifting operations.
• Supervise offshore installation, testing, pre-commissioning, and commissioning of the subsea control and distribution hardware.
• Liaise with Project Engineers responsible for delivery of other packages within the project (e.g., Umbilical systems, Flow control systems, well control systems, flowlines, etc.) to successfully manage interfaces and drive compliance with project requirements.
• Coordinate meetings and design reviews with contractor engineers and technicians and report outcomes.
• Liaise with internal stakeholders (e.g., Quality, HSE, project control, engineering disciplines, planning, asset & operations, Wells, marine, logistics, aviation, subsea intervention, etc.) to ensure adequate support for project execution.
• Log and track lessons learned during the detailed design and manufacturing activities within the Package.
• Review operation and maintenance manuals and guidelines issued by the contractor.
• The service will involve work and travel to fabrication sites, OEM facilities, and offshore vessels in the Gulf of Guinea.

Requisite Qualifications

• Minimum of Bachelor’s Degree in Electrical, Mechanical, Civil, or Subsea Engineering, with professional registration.
• Minimum of 15 years work experience with at least 10 years relevant experience in design, fabrication, and installation of Deepwater subsea hardware systems. Specific experience in design, fabrication, and installation of Subsea distribution hardware will be an advantage.
• Good understanding and application of Industry standards and codes (API17F / ISO 13628-6, API 17H, API 17TR4, API 17TR5, API 17TR6, IEC 60287, ASME B31.3, ASME IX, ASME B31.8, ISO 15607).
• Practical experience in working with subsea hardware/distribution systems OEMs (Original Equipment Manufacturer).
• Practical experience in developing subsea hardware specification and Datasheet.
• Knowledge in use of MS Office tools or similar software.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.
• Demonstrable project management experience and possibly with certifications if applicable.

go to method of application »

Service Description

• Ensure HSSEQ Compliance: Ensure all welding activities comply with HSSEQ (Health, Safety, Security, Environment and Quality) standards and promote a safety-first culture on-site.
• Enforcing IOGP (International Oil and Gas Producers) HSE (Health Safety and Environment) policies and procedures at Company worksites.
• Review Welding Procedures: Review detailed welding procedures, specifications, and instructions developed by the EPC contractor to ensure compliance with project requirements and industry standards.
• Ensure Technical Assurance: Provide technical assurance for all welding-related deliverables during the Detailed Engineering Design phase, ensuring they meet project specifications and quality standards. Respond to technical clarification and queries from contractor.
• Manage Welding Qualifications: Oversee and verify welding qualification tests, including Procedure Qualification Records (PQR), Welder Qualification Tests (WQT), and Welding Procedure Specifications (WPS), ensuring compliance with project requirements and industry standards.
• Conduct Welding Inspections: Perform and oversee welding inspections and non-destructive testing (NDT) to ensure weld quality and integrity.
• Review and Approve Welding Plans: Review and approve welding plans and procedures submitted by the EPC contractor, ensuring they are robust and meet project standards.
• Resolve Welding Issues: Address and resolve welding-related technical queries and issues during design, procurement, fabrication, and installation phases.
• Interface Management: Manage interfaces between welding activities and other project disciplines, including Subsea Hardware, FPSO, and Umbilical systems.
• Conduct Technical Reviews: Participate in technical reviews, including HAZIDs, HAZOPs, and constructability reviews, providing expert input on welding-related matters.
• Maintain Industry Knowledge: Stay updated with the latest welding technologies, industry standards, and best practices to ensure the project utilizes the most efficient and effective welding methods.
• Provide Training and Support: Provide training and technical support to project personnel and contractors on welding-related issues.
• Oversee Contractor Performance: Monitor and evaluate the performance of contractors’ welding activities to ensure compliance with project requirements and industry standards.
• Document Control: Ensure all welding documentation, including reports, certificates, and records, are accurately maintained and readily available for review and audit.
• Champion Quality Assurance: Promote and enforce quality assurance practices throughout all phases of the welding operations to achieve high standards of workmanship and reliability.
• Support Installation Activities: Provide technical support during the installation and commissioning phases, ensuring welding activities are completed on schedule and to the required quality standards.
• Responsible for safe, timely and efficient execution and drive progress of work scope based on project schedule.
• Work with Contractor to ensure quality issues are properly identified, documented, reported and timely dispositioned.
• Author and deliver daily, weekly, and monthly status, progress, and site reports.
• Liaise with internal stakeholders i.e., Quality, HSE, project control, engineering disciplines, planning, etc. to ensure adequate support for project execution.
• Log and track lessons Learned during the detailed design and manufacturing activities within the Package.

Requisite Qualifications

• Minimum of Bachelor’s Degree in Welding Engineering, Mechanical Engineering, Metallurgy, or a related discipline, with professional registration.
• Minimum of 15 years work experience with at least 10 years relevant experience in welding engineering, with a focus on pipeline and structural welding in an upstream Deepwater or similar environment.
• Extensive experience in developing, reviewing, and approving welding procedures, specifications, and instructions.
• Proven experience with welding qualification tests, including Procedure Qualification Records (PQR), Welder Qualification Tests (WQT), and Welding Procedure Specifications (WPS).
• Proficiency in conducting and overseeing welding inspections and non-destructive testing (NDT) techniques.
• Good understanding and application of Industry standards and codes for welding (DNV, API, ASME, etc.).
• Knowledge in use of MS Office tools or similar software.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.

go to method of application »

Service Description

• Promote Safety culture and drive Goal Zero compliance at the worksite.
• Enforcing IOGP HSE policies and procedures at worksites.
• Review documents issued by the contractor for the Scope of Work relevant to the Subsea manifold & Connection Systems.
• Participate in Design Reviews and Technical Workshops and any other Meetings as may be assigned in the Scope of Work.
• Review disposition Deviation/Derogation Requests, and Technical Queries that may originate from the contractor.
• Supervise manufacturing/fabrication of rigid subsea well jumpers and associated structures, ensuring compliance with procedures, design documentation, approved Inspection and test plan (ITP) and validation through testing.
• Oversee long lead items and other materials/goods receipt, inspection, and verification checks.
• Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites.
• Ensure Materials Record Book (including Certificates of Conformance and other technical documentation) are available prior to loadout of equipment.
• Liaise with EPC-3’s logistics team at the Local Fabrication Site, to support timely transportation of equipment to the quayside and safely load out of same.
• Ensure proper storage of subsea Equipment, tools, accessories per Contractor’s storage and maintenance procedure.
• Review and provide input to Assembly and Testing Procedure, Transportation Handling Instruction, Installation and offshore Testing Procedure.
• Liaise with Company’s Lifting and Hoisting SME to review lift plan, rigging register and support safe lifting operation.
• Supervise activities at the EPC-3 Local Fabrication Site and confirm compliance with the approved procedure. Activities shall not be limited to Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance Test, System Integration Test.
• Work with EPC-3 Contractor to ensure quality issues are properly identified, documented and timely dispositioned.
• Provide on a regular basis, a status and progress report of activities to the Lead Engineer.
• Log and track lessons Learned during the detailed design and manufacturing activities within the Package.
• Collaborate with EPC-3’s Workshop, Planning, QC, Warehouse, and other support team during execution of the manifold and Jumper scope, to drive compliance with project requirement and agreed schedule and key dates.
• Responsible for safe and efficient execution of work scope, and drive its timely completion, per contract and procedures.
• Liaise with internal stakeholders i.e., project, asset & operations, Wells, marine logistic, geomatic, aviation, diving, etc. team to ensure adequate support for project execution.
• Contribute to Close-out Report relevant to the Subsea manifold and Connection Systems.
• Oversee engineering analysis, creation of drawings, fabrication, and testing procedures (Welding, NDE, Coating) and other design outputs for construction.
• Participate in Design reviews HAZOPS, HAZIDS.
• Review and maintain installation, operation, and maintenance manuals and guidelines.
• Review, check and approve drawings for construction at worksites.
• Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites.
• Lead Root-Cause-Failure Analysis (RCFA), report-out and implement preventive and proactive actions close-out.
• Share knowledge across the company. Identify and champion best practices.
• Monitor manufacturing activities at various worksites and ensure appropriate witness, review, and approvals by Company representatives per approved project inspection and test plans.
• Support the development of young personnel.
• The service will involve work and travel to fabrication sites, OEM facility and offshore vessels in the Gulf of Guinea.

Requisite Qualifications

• Minimum of Bachelor’s Degree in Mechanical Engineering, Marine Engineering and/or Master in Subsea Engineering related discipline.
• At least 15 years of combined experience in engineering, manufacturing/fabrication and installation of subsea manifold and tie-in systems (Subsea rigid Jumpers and Connection Systems).
• Practical experience in Connection Systems (Hubs and Connectors) engineering and manufacturing processes of the Subsea Hardware systems.
• Practical experience in mechanical, electrical, or hydraulic design of subsea products.
• Practical experience as Company / Operator Representation in similar type project execution.
• Practical experience in integration and testing of pressure containing components such as pipe, forged fittings, valves, and hubs.
• Practical experience in use of CAD for models, drawings, and schematics.
• Good understanding and practical application of the following industry standards and codes related to subsea hardware and systems such as: API-RP-17R, API6A & 17D, ASME Section IX, ASME B31.3, ASME B31.8, API-RP-17H, API RP-17P, API RP-17R, API-RP-2A-WSD, AWS-D1.1, DNV-RP-F119, as well as other ISO, DNV and NORSOK equivalent standards in major subsea project is required.
• Knowledge in use of MS Office tools or similar software.
• Practical experience in working with OEM technicians and engineers to resolve technical issues.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.

go to method of application »

Service Type

• Project Engineering (Pull-in System, RUPS) services to be deployed preferably by a Nigerian National but expat will be considered if there are no suitable Nigerian service providers.

Service Description

• Ensure all riser and umbilical pull-in system engineering, construction, and installation activities comply with HSSEQ (Health, Safety, Security, Environment, and Quality) standards, promoting a safety-first culture on-site.
• Enforce IOGP (International Oil and Gas Producers) HSE (Health, Safety, and Environment) policies and procedures at Company worksites.
• Participate in multi-disciplinary Detailed Engineering Design for the project, focusing on riser and umbilical pull-in systems and related appurtenances.
• Ensure technical assurance of riser and umbilical pull-in system deliverables during the Detail Design phase, including managing all interfaces with other disciplines.
• Manage technical queries across design, procurement, fabrication, and installation phases, including overseeing any necessary qualification and testing.
• Oversee interfaces with FPSO, umbilical systems, and related equipment to ensure seamless integration and operation.
• Conduct and lead intra and multi-discipline technical reviews, including HAZIDs, HAZOPs, Constructability Reviews, Human Factor Engineering Reviews, and Reliability, Availability, and Maintainability Studies.
• Ensure that all engineering work is completed and verified in accordance with project quality procedures and standards.
• Review, critique, verify, and approve analysis and design of riser and umbilical pull-in systems, serving as an in-house subject matter expert (SME) familiar with relevant analysis methods and tools.
• Apply knowledge of applicable industry codes requirements to ensure the safe design and operation of riser and umbilical systems, working collaboratively with other disciplines.
• Collaborate effectively with engineering houses and other Community of Practice (CoP) Engineering disciplines to ensure project alignment and knowledge sharing.
• Demonstrate personal commitment to Company’s HSSE objectives and motivate the team to prioritize HSSE in all activities.
• Provide engineering input on alternative installation techniques proposed by the Contractor, ensuring they meet project specifications and safety standards.
• Witness site activities including Site Receipt Inspection, Factory Acceptance Test, Systems Integration Test, and confirm compliance with the approved procedure.
• Manage the HSSE performance of contractors during installation, ensuring HSSE targets are met or exceeded. Act as the HSSE champion during offshore installation activities, providing visible and proactive leadership to achieve Goal Zero.
• Provide technical support in preparation for riser and umbilical installation and offshore operations, including:
  • Reviewing the strength capacity and design of FPSO Hull Interfaces for the Riser and Umbilical Pull-in Systems, including pull-in lugs, porches, i-tubes, and pull-in sheaves.
  • Reviewing and approving installation procedures and method statements for risers and umbilicals to ensure safe and efficient execution.
  • Liaising with the Quality Assurance discipline to ensure alignment between QA/QC requirements and technical specifications.
  • Liaise with Company’s Lifting and Hoisting SME (Subject Matter Expert) to review lift plans, rigging registers, and support safe lifting operations.
• Responsible for safe, timely, and efficient execution and drive progress of work scope based on project schedule.
• Work with Contractor to ensure quality issues are properly identified, documented, reported, and timely dispositioned.
• Author and deliver daily, weekly, and monthly status, progress, and site reports.
• Liaise with internal stakeholders (e.g., Quality, HSE, project control, engineering disciplines, planning) to ensure adequate support for project execution.
• Log and track lessons learned during the detailed design and manufacturing activities within the Package.

Requisite Qualifications

• Bachelor's Degree in Civil, Mechanical, Subsea Engineering, or a related discipline, with professional registration.
• Minimum of 10 years of work experience, with at least 8 years of relevant experience directly related to riser and umbilical pull-in systems within an upstream Deepwater or similar environment.
• Proficient in analysis techniques for offshore pipeline and riser construction.
• Hands-on experience in offshore pipeline design, installation engineering, and project engineering.
• Proficient in specialized engineering software such as Orcaflex, Shear7, Offpipe, Abaqus, or Pipelay.
• Strong understanding and application of relevant industry standards and codes (e.g., DNV, API, ASME).
• Knowledge of manufacturing processes, including fabrication, machining, and mechanical systems.
• Strong understanding of project-specific requirements, design analysis, and technical documentation.
• Competent in using MS Office tools or equivalent software for documentation and reporting.
• Ability to effectively communicate, interface, and collaborate with a multi-disciplinary team of professionals located globally.
• Demonstrated ability to influence stakeholders and drive project objectives.
• Knowledge of personal and process safety, with the ability to apply these principles in an offshore project environment.

go to method of application »

Service Description

• Ensure HSSEQ Compliance: Ensure all riser engineering, construction, and installation activities comply with HSSEQ (Health, Safety, Security, Environment, and Quality) standards and promote a safety-first culture on-site.
• Enforce IOGP (International Oil and Gas Producers) HSE (Health, Safety, and Environment) policies and procedures at Company worksites.
• Participate in multi-disciplinary Detailed Engineering Design for the project, focusing on riser systems and related appurtenances.
• Review and provide input to technical specification documents, analysis reports, drawings, and other detailed engineering documents for the pipeline and riser system and other interfacing systems.
• Ensure technical assurance of riser-related deliverables during the Detail Design phase, including all interfaces with other disciplines.
• Manage technical queries during design, procurement, fabrication, and installation phases, including any applicable qualification and testing.
• Oversee interfaces with Subsea Hardware, FPSO, and Umbilical systems.
• Conduct intra and multi-discipline technical reviews, including HAZIDs, HAZOPs, Constructability reviews, Human Factor Engineering Reviews, and Reliability and Availability and Maintainability Studies.
• Ensure engineering work is completed and verified in accordance with project quality procedures.
• Review, critique, verify, and approve analysis/design of pipeline and riser systems, serving as an in-house SME familiar with analysis methods and tools.
• Apply knowledge of applicable industry codes and Shell requirements to ensure safe design and operations, working collaboratively with other disciplines.
• Collaborate effectively with engineering houses and other Community of Practice (CoP) Engineering disciplines within the Company.
• Demonstrate personal commitment to company HSSE objectives and motivate the team to be HSSE champions.
• Provide engineering input on alternative installation techniques proposed by the Contractor.
• Witness site activities including Site Receipt Inspection, Factory Acceptance Test, and confirm compliance with the approved procedure.
• Provide technical support in preparation for pipeline construction, offshore operations, and field installations. This includes:
  • Reviewing installation procedures and method statements for Risers and Flowlines.
  • Reviewing installation analysis for flowlines, risers, and spool pieces to validate installation methods and tools, including heavy offshore lifting plans.
  • Liaising with the Quality Assurance discipline to ensure alignment between QA/QC requirements and technical specifications.
  • Liaise with Company’s Lifting and Hoisting SME (Subject Matter Expert) to review lift plans, rigging registers, and support safe lifting operations.
• Responsible for safe, timely, and efficient execution and driving progress of work scope based on the project schedule.
• Work with Contractor to ensure quality issues are properly identified, documented, reported, and timely dispositioned.
• Author and deliver daily, weekly, and monthly status, progress, and site reports.
• Liaise with internal stakeholders (e.g., Quality, HSE, project control, engineering disciplines, planning) to ensure adequate support for project execution.
• Log and track lessons learned during the detailed design and manufacturing activities within the Package.

Requisite Qualifications

• Minimum of Bachelor's Degree in Civil, Mechanical, Subsea Engineering, or equivalent, with professional registration.
• Minimum of 10 years work experience with at least 8 years relevant experience directly related to riser and pipeline systems within an upstream Deepwater or similar environment.
• Experience with analysis techniques for offshore pipeline and riser construction.
• Proficient in engineering VIV strakes, stress joints, and wet insulated systems.
• Strong understanding of project-specific requirements, design analysis, and technical documentation.
• Hands-on experience in offshore pipeline design, installation engineering, and project engineering.
• Knowledge of manufacturing processes, fabrication, machining, and mechanical systems.
• Experience in pipeline construction and repair methods.
• Proficient in Orcaflex and Shear7 software.
• Proficient in Offpipe, Abaqus, or Pipelay software.
• Good understanding and application of relevant industry standards and codes (DNV, API, ASME, etc.).
• Knowledge in the use of MS Office tools or similar software.
• Ability to communicate, work, interface, interact, and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.

go to method of application »

Service Description

• Promote Safety culture and drive Goal Zero compliance at the worksite.
• Enforce HSE policies and procedures at worksites.
• Review documents issued by the contractor for the Scope of Work relevant to the Subsea manifold & Connection Systems.
• Participate in Design Reviews, Technical Workshops, and any other Meetings as assigned in the Scope of Work.
• Review and disposition Deviation/Derogation Requests, and Technical Queries from the contractor.
• Supervise manufacturing/fabrication of rigid subsea well jumpers and associated structures, ensuring compliance with procedures, design documentation, approved Inspection and Test Plan (ITP), and validation through testing.
• Oversee long lead items and other materials/goods receipt, inspection, and verification checks.
• Oversee implementation of contractor’s Procedure Qualification (including welding, NDE, and coating qualification tests) at worksites.
• Ensure Materials Record Book (including Certificates of Conformance and other technical documentation) are available prior to loadout of equipment.
• Liaise with EPC-3’s logistics team at the Local Fabrication Site to support timely transportation of equipment to the quayside and safe loadout.
• Ensure proper storage of subsea Equipment, tools, and accessories per Contractor’s storage and maintenance procedure.
• Review and provide input to Assembly and Testing Procedure, Transportation Handling Instruction, Installation, and offshore Testing Procedure.
• Liaise with Company’s Lifting and Hoisting SME to review lift plans, rigging register, and support safe lifting operations.
• Supervise activities at the EPC-3 Local Fabrication Site and confirm compliance with the approved procedure, including Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance Test, and System Integration Test.
• Work with EPC-3 Contractor to ensure quality issues are properly identified, documented, and timely dispositioned.
• Provide regular status and progress reports of activities to the Lead Engineer.
• Log and track lessons learned during the detailed design and manufacturing activities within the Package.
• Collaborate with EPC-3’s Workshop, Planning, QC, Warehouse, and other support teams during execution of the manifold and Jumper scope to drive compliance with project requirements and agreed schedule and key dates.
• Responsible for safe and efficient execution of work scope and drive its timely completion, per contract and procedures.
• Liaise with internal stakeholders (e.g., project, asset & operations, Wells, marine logistics, geomatics, aviation, diving) to ensure adequate support for project execution.
• Contribute to Close-out Report relevant to the Subsea manifold and Connection Systems.
• Oversee engineering analysis, creation of drawings, fabrication, and testing procedures (Welding, NDE, Coating), and other design outputs for construction.
• Participate in Design Reviews, HAZOPS, and HAZIDS.
• Review and maintain installation, operation, and maintenance manuals and guidelines.
• Review, check, and approve drawings for construction at worksites.
• Oversee implementation of contractor’s Procedure Qualification (including welding, NDE, and coating qualification tests) at worksites.
• Lead Root-Cause-Failure Analysis (RCFA), report-out, and implement preventive and proactive actions close-out.
• Share knowledge across the company and identify and champion best practices.
• Monitor manufacturing activities at various worksites and ensure appropriate witness, review, and approvals by Company representatives per approved project inspection and test plans.
• Support the development of young personnel.
• The service will involve work and travel to fabrication sites, OEM facilities, and offshore vessels in the Gulf of Guinea.

Requisite Qualifications

• Minimum of a Bachelor’s Degree in Mechanical Engineering, Marine Engineering, or a Master in Subsea Engineering related discipline.
• At least 15 years of combined experience in engineering, manufacturing/fabrication, and installation of subsea manifold and tie-in systems (Subsea rigid Jumpers and Connection Systems).
• Practical experience in Connection Systems (Hubs and Connectors) engineering and manufacturing processes of the Subsea Hardware systems.
• Practical experience in mechanical, electrical, or hydraulic design of subsea products.
• Practical experience as Company/Operator Representation in similar type project execution.
• Practical experience in integration and testing of pressure-containing components such as pipe, forged fittings, valves, and hubs.
• Practical experience in the use of CAD for models, drawings, and schematics.
• Good understanding and practical application of industry standards and codes related to subsea hardware and systems, including API-RP-17R, API6A & 17D, ASME Section IX, ASME B31.3, ASME B31.8, API-RP-17H, API RP-17P, API RP-17R, API-RP-2A-WSD, AWS-D1.1, DNV-RP-F119, and other ISO, DNV, and NORSOK equivalent standards in major subsea projects.
• Knowledge in the use of MS Office tools or similar software.
• Practical experience in working with OEM technicians and engineers to resolve technical issues.
• Ability to communicate, work, interface, interact, and influence effectively within a multi-disciplinary team of professionals located globally.