Job Vacancies at Worley

Service Type: Riser Engineering services to be deployed by a Nigerian National.

Service Description:

• Ensure HSSEQ Compliance: Ensure all riser engineering, construction and installation activities comply with HSSEQ (Health, Safety, Security, Environment and Quality) standards and promote a safety-first culture on-site.
• Enforcing Shell and IOGP (International Oil and Gas Producers) HSE (Health Safety and Environment) policies and procedures at Company worksites.
• Participate in multi-disciplinary Detailed Engineering Design for the project, focusing on riser systems and related appurtenances.
• Review and provide input to technical specification documents, analysis reports, drawings and other detailed engineering documents for the pipeline and riser system and other interfacing systems.
• Ensure technical assurance of riser-related deliverables during the Detail Design phase, including all interfaces with other disciplines.
• Manage technical queries during design, procurement, fabrication, and installation phases, including any applicable qualification and testing.
• Oversee interfaces with Subsea Hardware, FPSO, and Umbilical systems.
• Conduct intra and multi-discipline technical reviews, including HAZIDs, HAZOPs, Constructability reviews, Human Factor Engineering Reviews, and Reliability and Availability and Maintainability Studies.
• Ensure engineering work is completed and verified in accordance with project quality procedures.
• Review, critique, verify, and approve analysis/design of pipeline and riser systems, serving as an in-house SME familiar with analysis methods and tools.
• Apply knowledge of applicable industry codes and Shell requirements to ensure safe design and operations, working collaboratively with other disciplines.
• Collaborate effectively with engineering houses and other Community of Practice (CoP) Engineering disciplines within the Company.
• Demonstrate personal commitment to company HSSE objectives and motivate the team to be HSSE champions.
• Provide engineering input on alternative installation techniques proposed by the Contractor.
• Witness site activities including Site Receipt Inspection, Factory Acceptance Test, and confirm compliance with the approved procedure.
• Manage the HSSE performance of contractors during installation to ensure HSSE targets are met or exceeded. Act as the HSE champion for Offshore Installation activities, ensuring Company’s team is highly visible and providing proactive HSE leadership to achieve Goal Zero.
• Provide technical support in preparation for pipeline construction, offshore operations, and field installations. This includes:
• Reviewing installation procedures and method statements for Risers and Flowlines.
• Reviewing installation analysis for flowlines, risers, and spool pieces to validate installation methods and tools, including heavy offshore lifting plans.
• Liaising with the Quality Assurance discipline to ensure alignment between QA/QC requirements and technical specifications.
• Liaise with Company’s Lifting and Hoisting SME (Subject Matter Expert) to review lift plan, rigging register and support safe lifting operations.
• Responsible for safe, timely and efficient execution and drive progress of work scope based on project schedule.
• Work with Contractor to ensure quality issues are properly identified, documented, reported and timely dispositioned.
• Author and deliver daily, weekly, and monthly status, progress, and site reports.
• Liaise with internal stakeholders i.e., Quality, HSE, project control, engineering disciplines, planning, etc. to ensure adequate support for project execution.
• Log and track lessons Learned during the detailed design and manufacturing activities within the Package.

Requisite Qualifications:

• Minimum of 10 years work experience with at least 8 years relevant experience directly related to riser and pipeline systems within an upstream Deepwater or similar environment.
• Minimum of bachelor’s degree in civil, Mechanical, Subsea Engineering, or equivalent, with professional registration.
• Experience with analysis techniques for offshore pipeline and riser construction.
• Proficient in engineering VIV strakes, stress joints, wet insulated systems.
• Strong understanding of project-specific requirements, design analysis, and technical documentation.
• Hands-on experience in offshore pipeline design, installation engineering, and project engineering.
• Knowledge of manufacturing processes, fabrication, machining, and mechanical systems.
• Experience in pipeline construction and repair methods.
• Proficient in Orcaflex and shear 7 software.
• Proficient in Offpipe, Abaqus, or Pipelay software.
• Good understanding and application of relevant Industry standards and codes (DNV, API, ASME, etc.).
• Knowledge in use of MS Office tools or similar software
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.

Service Type: Riser Engineering services to be deployed by a Nigerian National.

Requisite Qualifications:

• Minimum of 10 years work experience with at least 8 years relevant experience directly related to riser and pipeline systems within an upstream Deepwater or similar environment.
• Minimum of bachelor’s degree in civil, Mechanical, Subsea Engineering, or equivalent, with professional registration.
• Experience with analysis techniques for offshore pipeline and riser construction.
• Proficient in engineering VIV strakes, stress joints, wet insulated systems.
• Strong understanding of project-specific requirements, design analysis, and technical documentation.
• Hands-on experience in offshore pipeline design, installation engineering, and project engineering.
• Knowledge of manufacturing processes, fabrication, machining, and mechanical systems.
• Experience in pipeline construction and repair methods.
• Proficient in Orcaflex and shear 7 software.
• Proficient in Offpipe, Abaqus, or Pipelay software.
• Good understanding and application of relevant Industry standards and codes (DNV, API, ASME, etc.).
• Knowledge in use of MS Office tools or similar software
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.

go to method of application »

Service Type: Subsea Engineering services to be deployed by a Nigerian National

Service Description:

• Promote Safety culture and drive Goal Zero compliance at the worksite.
• Ensure Materials Record Book (including Certificated of Conformance and other technical documentation are available prior to loadout of equipment.
• Liaise with EPC-3’s logistics team at the Local Service Base to support timely and safely load out of equipment and transportation of same to the quayside.
• Review and provide input to Assembly and Testing Procedure, Transportation Handling Instruction, Installation and Testing Procedure.
• Liaise with Company’s Lifting and Hoisting representative to review lift plan, rigging register and support safe lifting operation.
• Supervise activities at the EPC-3 Local Service Base and confirm compliance with the approved procedure. Activities shall not be limited to Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance Test, System Integration Test.
• Work with EPC-3’s team to ensure quality issues are properly identified, documented and timely dispositioned.
• Collaborate with EPC-3’s Workshop, Planning, QC, Warehouse, and other support team during execution of the Tree scope to drive compliance with project requirement and agreed schedule and key dates.
• Responsible for safe and efficient execution of work scope and drive its timely completion, per contract and procedures.
• Liaise with internal stakeholders i.e., project, asset & operations, Wells, marine logistic, geomatic, aviation, diving, etc. team to ensure adequate support for project execution.
• Provide daily report of activities at the EPC-3 Local Service Base located in Onne.
• The service will involve work and travel to fabrication sites, OEM facility and offshore vessels in the Gulf of Guinea.

Requisite Qualifications:

• Minimum of 10 years relevant experience in assembly, testing and installation of deepwater Subsea trees and offshore construction.
• Minimum bachelor’s degree in engineering with professional registration.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Practical experience in working with OEM technicians and engineers to resolve technical issues.
• Practical experience in managing Christmas tree interface information.
• Good understanding and practical application of Industry standards and codes (API 6A, 17D, 17H, etc.)
• Develop Tree functional Specification and Datasheet, and conduct engineering design reviews.
• Knowledge in use of MS Office tools or similar software

Senior Hardware Engineer

Service Type: Subsea Engineering services to be deployed by a Nigerian National

Requisite Qualifications:

• Minimum of 10 years relevant experience in assembly, testing and installation of deepwater Subsea trees and offshore construction.
• Minimum bachelor’s degree in engineering with professional registration.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Practical experience in working with OEM technicians and engineers to resolve technical issues.
• Practical experience in managing Christmas tree interface information.
• Good understanding and practical application of Industry standards and codes (API 6A, 17D, 17H, etc.)
• Develop Tree functional Specification and Datasheet, and conduct engineering design reviews.
• Knowledge in use of MS Office tools or similar software

go to method of application »

Service Description:
 

• Ensure HSSEQ Compliance: Ensure all welding activities comply with HSSEQ (Health, Safety, Security, Environment and Quality) standards and promote a safety-first culture on-site.
• Enforcing Shell and IOGP (International Oil and Gas Producers) HSE (Health Safety and Environment) policies and procedures at Company worksites.
• Review Welding Procedures: Review detailed welding procedures, specifications, and instructions developed by the EPC contractor to ensure compliance with project requirements and industry standards.
• Ensure Technical Assurance: Provide technical assurance for all welding-related deliverables during the Detailed Engineering Design phase, ensuring they meet project specifications and quality standards. Respond to technical clarification and queries from contractor.
• Manage Welding Qualifications: Oversee and verify welding qualification tests, including Procedure Qualification Records (PQR), Welder Qualification Tests (WQT), and Welding Procedure Specifications (WPS), ensuring compliance with project requirements and industry standards.
• Conduct Welding Inspections: Perform and oversee welding inspections and non-destructive testing (NDT) to ensure weld quality and integrity.
• Review and Approve Welding Plans: Review and approve welding plans and procedures submitted by the EPC contractor, ensuring they are robust and meet project standards.
• Resolve Welding Issues: Address and resolve welding-related technical queries and issues during design, procurement, fabrication, and installation phases.
• Interface Management: Manage interfaces between welding activities and other project disciplines, including Subsea Hardware, FPSO, and Umbilical systems.
• Conduct Technical Reviews: Participate in technical reviews, including HAZIDs, HAZOPs, and constructability reviews, providing expert input on welding-related matters.
• Maintain Industry Knowledge: Stay updated with the latest welding technologies, industry standards, and best practices to ensure the project utilizes the most efficient and effective welding methods.
• Provide Training and Support: Provide training and technical support to project personnel and contractors on welding-related issues.
• Oversee Contractor Performance: Monitor and evaluate the performance of contractors' welding activities to ensure compliance with project requirements and industry standards.
• Document Control: Ensure all welding documentation, including reports, certificates, and records, are accurately maintained and readily available for review and audit.
• Champion Quality Assurance: Promote and enforce quality assurance practices throughout all phases of the welding operations to achieve high standards of workmanship and reliability.
• Support Installation Activities: Provide technical support during the installation and commissioning phases, ensuring welding activities are completed on schedule and to the required quality standards.
• Responsible for safe, timely and efficient execution and drive progress of work scope based on project schedule.
• Work with Contractor to ensure quality issues are properly identified, documented, reported and timely dispositioned.
• Author and deliver daily, weekly, and monthly status, progress, and site reports.
• Liaise with internal stakeholders i.e., Quality, HSE, project control, engineering disciplines, planning, etc. to ensure adequate support for project execution.
• Log and track lessons Learned during the detailed design and manufacturing activities within the Package.
   

Requisite Qualifications:
 

• Minimum of 15 years work experience with at least 10 years relevant experience in welding engineering, with a focus on pipeline and structural welding in an upstream Deepwater or similar environment.
• Minimum of bachelor’s degree in Welding Engineering, Mechanical Engineering, Metallurgy, or a related discipline, with professional registration.
• Extensive experience in developing, reviewing, and approving welding procedures, specifications, and instructions.
• Proven experience with welding qualification tests, including Procedure Qualification Records (PQR), Welder Qualification Tests (WQT), and Welding Procedure Specifications (WPS).
• Proficiency in conducting and overseeing welding inspections and non-destructive testing (NDT) techniques.
• Good understanding and application of Industry standards and codes for welding (DNV, API, ASME, etc.).
• Knowledge in use of MS Office tools or similar software
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.
   

Principal Welding Engr

Service Type: Welding Engineering services to be deployed by a Nigerian National.

Requisite Qualifications:

• Minimum of 15 years work experience with at least 10 years relevant experience in welding engineering, with a focus on pipeline and structural welding in an upstream Deepwater or similar environment.
• Minimum of bachelor’s degree in Welding Engineering, Mechanical Engineering, Metallurgy, or a related discipline, with professional registration.
• Extensive experience in developing, reviewing, and approving welding procedures, specifications, and instructions.
• Proven experience with welding qualification tests, including Procedure Qualification Records (PQR), Welder Qualification Tests (WQT), and Welding Procedure Specifications (WPS).
• Proficiency in conducting and overseeing welding inspections and non-destructive testing (NDT) techniques.
• Good understanding and application of Industry standards and codes for welding (DNV, API, ASME, etc.).
• Knowledge in use of MS Office tools or similar software
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.
• Knowledge of personal and process safety.

go to method of application »

Service Type: Subsea Engineering services to be deployed by a Nigerian National

Service Description:

• Promote Safety culture and drive Goal Zero compliance at the worksite.
• Enforcing Shell and IOGP HSE policies and procedures at worksites.
• Review documents issued by the contractor for the Scope of Work relevant to the Subsea manifold & Connection Systems.
• Participate in Design Reviews and Technical Workshops and any other Meetings as may be assigned in the Scope of Work.
• Review disposition Deviation/Derogation Requests, and Technical Queries that may originate from the contractor.
• Supervise manufacturing/fabrication of rigid subsea well jumpers and associated structures, ensuring compliance with procedures, design documentation, approved Inspection and test plan (ITP) and validation through testing,
• Oversee long lead items and other materials/goods receipt, inspection, and verification checks.
• Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites
• Ensure Materials Record Book (including Certificated of Conformance and other technical documentation are available prior to loadout of equipment.
• Liaise with EPC-3’s logistics team at the Local Fabrication Site, to support timely transportation of equipment to the quayside and safely load out of same.
• Ensure proper storage of subsea Equipment, tools, accessories per Contractor’s storage and maintenance procedure.
• Review and provide input to Assembly and Testing Procedure, Transportation Handling Instruction, Installation and offshore Testing Procedure.
• Liaise with Company’s Lifting and Hoisting SME to review lift plan, rigging register and support safe lifting operation.
• Supervise activities at the EPC-3 Local Fabrication Site and confirm compliance with the approved procedure. Activities shall not be limited to Site Receipt Inspection, Factory Acceptance Test, Extended Factory Acceptance Test, System Integration Test.
• Work with EPC-3 Contractor to ensure quality issues are properly identified, documented and timely dispositioned.
• Provide on a regular basis, a status and progress report of activities to the Lead Engineer.
• Log and track lessons Learned during the detailed design and manufacturing activities within the Package.
• Collaborate with EPC-3’s Workshop, Planning, QC, Warehouse, and other support team during execution of the manifold and Jumper scope, to drive compliance with project requirement and agreed schedule and key dates.
• Responsible for safe and efficient execution of work scope, and drive its timely completion, per contract and procedures.
• Liaise with internal stakeholders i.e., project, asset & operations, Wells, marine logistic, geomatic, aviation, diving, etc. team to ensure adequate support for project execution.
• Contribute to Close-out Report relevant to the Subsea manifold and Connection Systems.
• Oversee engineering analysis, creation of drawings, fabrication, and testing procedures (Welding, NDE, Coating) and other design outputs for construction.
• Participate in Design reviews HAZOPS, HAZIDS
• Review and maintain installation, operation, and maintenance manuals and guidelines.
• Review, check and approve drawings for construction at worksites.
• Oversee implementation of contractor’s Procedure Qualification (including welding, NDE and coating qualification tests) at worksites
• Lead Root-Cause-Failure Analysis (RCFA), report-out and implement preventive and proactive actions close-out.
• Share knowledge across the company. Identify and champion best practices.
• Monitor manufacturing activities at various worksites and ensure appropriate witness, review, and approvals by Company representatives per approved project inspection and test plans.
• Support the development young personnels.
• The service will involve work and travel to fabrication sites, OEM facility and offshore vessels in the Gulf of Guinea.

Requisite Qualifications:

• At least 15 years of combined experience in engineering, manufacturing/fabrication and installation of subsea manifold and tie-in systems (Subsea rigid Jumpers and Connection Systems).
• Minimum of bachelor’s degree in mechanical engineering, Marine Engineering and/or Master in Subsea Engineering related discipline.
• Practical experience in Connection Systems (Hubs and Connectors) engineering and manufacturing processes of the Subsea Hardware systems.
• Practical experience in mechanical, electrical, or hydraulic design of subsea products
• Practical experience as Company / Operator Representation in similar type project execution.
• Practical experience in integration and testing of pressure containing components such as pipe, forged fittings, valves, and hubs.
• Practical experience in use of CAD for models, drawings, and schematics.
• Good understanding and practical application of the following industry standards and codes related to subsea hardware and systems such as: API-RP-17R, API6A & 17D, ASME Section IX, ASME B31.3, ASME B31.8, API-RP-17H, API RP-17P, API RP-17R, API-RP-2A-WSD, AWS-D1.1, DNV-RP-F119, as well as other ISO, DNV and NORSOK equivalent standards in major subsea project is required
• Knowledge in use of MS Office tools or similar software.
• Practical experience in working with OEM technicians and engineers to resolve technical issues.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.

Service Type: Subsea Engineering services to be deployed by a Nigerian National

Requisite Qualifications:

• At least 15 years of combined experience in engineering, manufacturing/fabrication and installation of subsea manifold and tie-in systems (Subsea rigid Jumpers and Connection Systems).
• Minimum of bachelor’s degree in mechanical engineering, Marine Engineering and/or Master in Subsea Engineering related discipline.
• Practical experience in Connection Systems (Hubs and Connectors) engineering and manufacturing processes of the Subsea Hardware systems.
• Practical experience in mechanical, electrical, or hydraulic design of subsea products
• Practical experience as Company / Operator Representation in similar type project execution.
• Practical experience in integration and testing of pressure containing components such as pipe, forged fittings, valves, and hubs.
• Practical experience in use of CAD for models, drawings, and schematics.
• Good understanding and practical application of the following industry standards and codes related to subsea hardware and systems such as: API-RP-17R, API6A & 17D, ASME Section IX, ASME B31.3, ASME B31.8, API-RP-17H, API RP-17P, API RP-17R, API-RP-2A-WSD, AWS-D1.1, DNV-RP-F119, as well as other ISO, DNV and NORSOK equivalent standards in major subsea project is required
• Knowledge in use of MS Office tools or similar software.
• Practical experience in working with OEM technicians and engineers to resolve technical issues.
• Ability to communicate, work, interface, interact and influence effectively within a multi-disciplinary team of professionals located globally.