Jobs at IOTA Group - Nigeria

Activities
The Service Holder shall:

• Ensure the safe design of Offshore Facilities in accordance with Company requirements, project specifications and applicable international standards.
• Coordinate and supervise all safety engineering activities performed by EPC Contractors and specialized Consultants.
• Ensure timely review, consolidation of comments and approval of safety engineering deliverables.
• Verify compliance of contractor studies and recommendations with project requirements and Company standards.
• Promote Safety-in-Design principles throughout all project phases.
• Identify, assess and support resolution of safety-related technical issues.
• Maintain the Safety Action Register and ensure close-out of recommendations arising from safety studies and reviews.
• Participate in technical reviews and technical assurance activities.

Risk Assessment and Safety Studies:

• Coordinate, review and approve all project safety studies and risk assessments.
• Ensure execution and follow-up of:
  • HAZID Workshops;
  • HAZOP Studies;
  • SIMOPS Assessments;
  • Quantitative Risk Assessments (QRA);
  • Fire and Explosion Risk Assessments;
  • Fire & Gas Detection Studies;
  • Escape, Evacuation and Rescue Analyses (EERA);
  • Dropped Object Studies;
  • Bow-Tie Analyses;
  • SIL Assessments and Functional Safety Reviews;
  • Technological Risk Assessments (TRA);
  • ALARP Demonstrations.
  • Ensure implementation of recommendations resulting from safety reviews.
  • Support development and maintenance of Major Accident Hazard Registers.
  • Ensure identification and management of Safety Critical Elements and associated Performance Standards.
  • Review design modifications and assess their impact on project risk profile.
  • Coordinate management of technical deviations, concessions and change requests affecting all packages related tsafety design.
  • Interface Management
  • Ensure consistency of safety philosophies and risk management approaches across all project packages.

Manage interfaces with:

• Process Engineering;
• Layout and Asset Design Teams;
• Instrumentation and Control Teams;
• Installation and Construction Teams;
• Commissioning Teams;
• Operations and Maintenance Representatives;
• HSE Teams.
• Ensure safety requirements are integrated intdesign and execution activities.
• Coordinate multidisciplinary inputs required for safety studies and risk assessments.
• Procurement and Fabrication
• Support procurement activities relating tsafety.
• Review and approve technical requisitions, specifications, vendor documentation and manufacturing dossiers.
• Monitor Contractor and Vendor performance with respect tengineering, fabrication and manufacturing activities.
• Ensure qualification requirements and technical compliance are maintained throughout procurement and fabrication phases.
• Participate in Factory Acceptance Tests (FATs), technical audits and readiness reviews when required.
• Installation and Construction
• Support construction and installation teams regarding safety engineering matters.
• Review construction-related risk assessments and safety studies.
• Ensure SIMOPS studies are developed and regularly updated.
• Participate in constructability, operability and installation reviews.
• Support management of technical deviations, concessions and Management of Change (MOC) processes from a safety perspective.
• Provide safety engineering support during offshore campaigns as required.
• Pre-Commissioning and Commissioning
• Ensure all safety requirements are adequately addressed during pre-commissioning and commissioning phases.
• Participate in commissioning readiness reviews.
• Review commissioning procedures and start-up philosophies from a safety perspective.
• Support operational risk assessments prior tstart-up activities.
• Contribute thandover dossiers and final safety documentation.
• Support preparation for operational phase and safe transition tOperations.
• HSE, Quality and Project Control
• Maintain the highest level of HSE performance throughout all project phases.
• Ensure design and execution activities comply with Company HSE policies and statutory requirements.
• Liaise with Project QHSE and QA/QC teams tensure the SURF scope is safe, operable and maintainable.
• Assist project management in the assessment and management of technical risks.
• Monitor Contractor performance and support management of change processes.
• Promote continuous improvement and implementation of industry best practices.
• Ensure project objectives regarding safety, quality, schedule and cost are achieved.

Context and Environment:

• IMA project is in Detailed Engineering and EPC execution phase. The role covers onshore and offshore facilities and supports successful delivery through offshore installation and commissioning.
• The Lead Safety Engineer will support the execution phase of IMA developments following investment sanction and EPC contract award. Activities will cover Detailed Engineering, Procurement, Fabrication, Offshore Installation, Pre-Commissioning and Commissioning of the onshore and offshore IMA project facilities.
• The project is expected tremain in execution through offshore installation and final commissioning activities up t2029.

Hse Objectives:

• HSE Leadership Demonstrate exemplary HSE behavior within the engineering function, ensuring compliance with Company's HSE rules and prompt reporting of any unsafe act, condition, or incident.Safety-by-DesignIdentify, assess, and mitigate HSE risks through engineering design and technical decisions across all project phases.HSE CompetencyEnsure engineering personnel are trained, competent, and aware of their HSE responsibilities, with continuous monitoring.HSE Support & EngagementSupport Project HSE objectives through engineering reviews and proactively promote HSE awareness, escalating engineering-related HSE concerns as required.

Qualifications

• Professional Experience (number of years): 10
• Experience within project and project management: (number of years): 10
• Familiarity with international standards including DNV, API, ISand Company specifications.
• Previous experience managing EPC Contractors and multidisciplinary interfaces.
• Familiar with Company's standards

Additional Information:

• This position is open to EXPAT but will be on Resident status.

go to method of application »

Job Description

• Following Contract award and FID, the Engineering Lead supports the WHP Package Manager in the delivery of the EPCC contract from award toperations, with accountability for engineering governance, technical quality, and design integrity of the WHP package. 
• The role ensures timely and compliant engineering deliverables in support of procurement, fabrication, installation, and HUC, including technical support tvendor selection, TBE, and Pplacement. 
• The objective is tenable right-first-time execution, minimize rework and late changes, and support safe delivery within the approved schedule, up tstart-up and operations nlater than Q4 2028.

Activities
Pre FID activities:

• Support the WHP Package Manager during the EPC and LLI Calls for Tender by leading technical preparation and engineering inputs, including review of FEED deliverables, technical specifications, data sheets, and engineering scope definitions up tRTA.
• Ensure engineering readiness and maturity of the WHP package at RTA, including resolution of key technical risks, constructability considerations, and alignment of engineering assumptions with the Project schedule and execution strategy.
• Provide engineering input tthe development of proforma EPC and LLI contracts, ensuring technical scopes, specifications, interfaces, and engineering responsibilities are clearly defined and consistent.
• Support identification and definition of engineering support contracts required for execution (e.g. specialist CSP installation engineering, design verification, technical assistance), and contribute trelated CFT documentation.
• Support preparation for the EPC execution phase by contributing to:
  • definition of the engineering organization and discipline resource needs,o
  • identification of engineering deliverables required tsupport early procurement and construction, and mobilisation planning for engineering support to Contractor locations as required.
  • Support the IMA Project Management team in achieving overall Project FID, by ensuring the WHP engineering scope is technically robust, executable, and aligned with cost, schedule, and H3SE objectives.

Post FID activities
H3SE & compliance:

• Lead by example by demonstrating exemplary H3SE behavior within the engineering function and ensuring full implementation of H3SE requirements across all engineering activities.
• Ensure engineering deliverables, reviews, and decisions are conducted in compliance with Company Ethics, Code of Conduct, and Anti-Corruption policies.
• Promote a strong safety-by-design culture, ensuring H3SE risks are identified, assessed, and mitigated through engineering solutions and design choices.
• Engineering Management & Delivery
• Lead and coordinate all engineering activities for the WHP package, ensuring technical quality, compliance with Company standards, and alignment with contractual and execution requirements.
• Manage engineering resources within project constraints, including structuring the engineering organization, mobilizing specialist support, and adjusting resources tmeet delivery priorities.
• Ensure timely delivery of engineering outputs tsupport procurement, fabrication, installation, and HUC, including resolution of technical queries and deviations.
• Engineering Performance Monitoring
• Monitor engineering progress and deliverable maturity, identifying risks or deviations that may impact cost, schedule, or constructability, and proactively proposing corrective actions.
• Provide timely and accurate engineering status reporting tthe Package Manager, highlighting critical issues, risks, and required decisions.
• Contractor Engineering Oversight
• Monitor and control Contractor engineering performance, ensuring compliance with contractual technical requirements, Company specifications, QA standards, and approved procedures.
• Participate, as COMPANY engineering representative, in engineering and technical meetings with Contractors as defined in the contract.
• Interface & Stakeholder Support
• Support proper handling of engineering interfaces with Drilling, SURF, Brownfield, Onshore Pipeline, and Operations, ensuring technical consistency and avoidance of late design changes.
• Support Project Management, as required, in technical engagements with Partners and Authorities, workshops, and technical committees.

Qualifications

• Experience within project and project management: (number of years) : 10.

go to method of application »

Activities

• Review and approve all Civil designs and site preparatory works shop drawings in line with procedures, COMPANY specifications and standards
• Ensure that basis of design and specifications for buildings, civil and structural works are adhered to.
• Review and approve all early works drawings, MTOs and studies
• Review and approve all Civil Engineering Design deliverables (roads, excavation, jetty assessment, on shore plant civil infrastructure and buildings, etc.) at the Detailed Engineering Design Phase
• Analyze the technical proposals by EPC contractor and ensure compliance with specifications and standards.
• Coordinate the various trades involved in Building Engineering to achieve optimized designs adapted to needs.
• Lead all Civil and Structural aspects of the work and coordinate Civil/Structural interfaces with other disciplines/professions
• Follow up fabrication activities on site and in contractors’ fabrication yards to ensure compliance with engineering designs.
• Participate in audits for the different project phases. As required.
• Participate and support project reviews (HAZID, HAZOP, 3D Model reviews etc.)
• Supervise site construction activities of Foundation, concrete Pipe Sleepers, pipe support structures, equipment support structures, plant roads, shore protection, and dredging activities.
• Approve Request for Inspection (RFI) on every milestone of construction.
• Review and approve route survey or existing right of way to re-establish the beacon points.
• Ensure that the Project Statement of Requirements and engineering dossier requirements are met safely, while maintaining quality within budget and schedule.
• Ensure close interface with Engineering and Construction contractors through Engineering, Procurement Construction and commissioning to ensure delivery of Project, tie-in and Modification
• Ensure the quality of technical work and the technical integrity, constructability, functionality,
• Ensure proper follow-up on Red-line markups and as-built documentation and close-out.

Context and Environment:

• IMA Gas Field Development Project is to develop 1.28 TCF of gas through a 4-slot shallow water conductor-supported well-head platform in 8 – 10m of water to produce 380 MMsfcd at plateau. The production fluid to be transported through an 18”x 15km subsea and 18” x 7km onshore pipeline system to the onshore dehydration system at the NEPL/WAGL – owned Bonny NAG plant that is situated within the Renaissance-operated Bonny Oil and Gas Terminal. Treated gas to be exported to Nigeria LNG.
• Accountabilities
• To Lead the Civil and Structural aspects of Engineering design and Works, and proactively ensure that there are no gaps, and that the deliverables comply with company requirements – SOR, General Specifications, and relevant international codes and standards – throughout the project.
• To coordinate all interfaces with ECP, FO & HQ on Civil/Structural related activities, and advise on possible optimization strategies where required
• To provide technical specialist input and support in evaluating, selecting, and applying standard engineering methods, techniques, procedures, and criteria, using independent judgment in making adaptations and modifications as it involves engineering design and to ensure that Construction CTRs are adequately supported and guided during project execution for the overall achievement of project objectives.
• Support Package Manager and Engineering Manager of Projects in delivering the package with a focus on safety, quality, compliance, and continuous improvement
• Support and enforce the Project HSE objectives and directive and ensure all targets are achieved.

Qualifications

• Minimum of bachelor’s degree in civil or structural engineering
• Minimum of 10 years’ experience in civil and structures engineering
• Experience in Oil and Gas EPC Projects.
• Project management culture

Additional Information:

• This position is open to Nigerian nationals only.

go to method of application »

Job Description

• Pre-FID: Provide offshore pipeline engineering support to mature the pipeline design basis, route selection, technical specifications, installation philosophy, schedule and cost inputs up to RTA and contract readiness, ensuring alignment with project execution strategy, HSE requirements and FID governance.
• Post FID: Be responsible for the technical follow-up, review and validation of the pipeline design and associated installation engineering deliverables, ensuring that the pipeline system is safe, constructible, compliant with Contract requirements, project specifications, applicable codes and standards, and ready for procurement, fabrication, installation, pre-commissioning, commissioning and handover.

Pre FID activities:

• Support review and consolidation of offshore pipeline design basis, project specifications, technical requisitions and key engineering assumptions for FEED close-out, CFT and RTA.
• Contribute to pipeline route selection, shore approach definition, crossing philosophy, geophysical/geotechnical data review and identification of key installation constraints.
• Support preparation and technical clarification of EPC/LLI tender documents related to line pipe, coating, welding, installation, pre-commissioning and associated pipeline deliverables.
• Review contractor technical proposals, deviations, qualifications and clarifications related to pipeline design, installation methodology and constructability.
• Support project management in identifying key pipeline technical risks, schedule drivers, long-lead items and installation readiness requirements for FID.

Post FID activities
H3SE & compliance:

• Adopt and demonstrate exemplary behavior regarding H3SE, to implement H3SE rules and requirements within his area of responsibility and to ensure that required H3SE competencies are within his team.
• Demonstrate an exemplary behavior regarding the Company Ethics and “Code of Conduct” policy and topromote and enforce the Anti-Corruption Program within his team.
• Verify that H3SE rules are understood and respected on the worksites (H3SE awareness) and to ensure safe working practices are used by Contractors along all phases of project.

Primary Responsibilities

• Manage and coordinate the review of pipeline engineering deliverables, ensuring timely comments, closure of technical queries and alignment with Contract requirements.
• Follow up pipeline design activities including route engineering, wall thickness, on-bottom stability, free-span/VIV, buckling, expansion, crossings, shore approach, corrosion protection and coating design.
• Support installation engineering by reviewing applicable installation analyses, lay tension, curvature limits, stinger configuration, abandonment and recovery, weather limitations and installation procedures.
• Ensure design maturity is sufficient before procurement, fabrication, welding qualification, coating, load-out,offshore installation and pre-commissioning activities commence.
• Provide technical support during fabrication, construction, installation and pre-commissioning, including resolution of site queries, non-conformances, deviations and engineering changes.
• Report pipeline engineering progress, critical issues, technical risks and required decisions to the SURF Package Manager and relevant project stakeholders.
• Act as Company technical representative for pipeline design and engineering matters with EPC contractor, vendors and third-party specialists.
• Ensure contractor deliverables comply with Contract requirements, project specifications, approved design basis, applicable codes and Company rules.
• Review and challenge contractor assumptions, calculation reports, procedures, installation analyses, method statements and readiness dossiers.
• Participate in technical meetings, design reviews, constructability reviews, installation readiness reviews, HAZID/HAZOP/PTR and risk workshops.
• Monitor contractor performance on pipeline engineering deliverables, comment resolution, technical query closure and interface deliverables.
• Support offshore execution as required, including technical assistance to Company site representatives during installation and pre-commissioning campaigns.
• Support to rest of Project and Package Manager
• Ensure pipeline interfaces with subsea structures, risers/spools, tie-ins, crossings, shore approach, onshorefacilities, Field Operations and pre-commissioning are identified, managed and closed in due time.
• Support interface clarification with geotechnical, metocean, environmental, HSE, QA/QC, procurement, fabrication, installation and operations teams.
• Review and validate technical documents required for partners, authorities, certifying bodies or third-partyapprovals where applicable.
• Anticipate design or installation changes that may impact other packages, schedule, cost, HSE or operational integrity, and propose mitigation actions.

Qualifications

• Professional Experience (number of years) : 15
• Experience within project and project management: (number of years) : 10.

go to method of application »

Activities

• Act as COMPANY’s focal point and technical authority for all instrumentation, control, metering, and safeguarding systems for the IMA Project.
• Review, comment on, and approve EPC Contractors’ instrumentation engineering deliverables.
• Ensure compliance of all Instrumentation Engineering deliverables to Company's Referential, applicable industry standards such as IEC, API, ISO, and ATEX requirements.
• Review and validate P&IDs, Instrument Index, Instrument Datasheets, Control Philosophies, Cause and Effect Matrices, Hook-up Diagrams, Cables Schedules, Junction Box Schedules, and Loop Diagrams.
• Ensure consistency between process requirements and instrument design.
• Ensure sufficient and adequate instrumentation (Pressure Monitoring, Temperature Monitoring, Flow Measurement, ESD function, Sand Detection, F&G Detection and remote monitoring and control functionality) is provided for the well head platforms.
• Ensure adequate safeguarding is provided for all equipment on the brownfield equipment.
• Liaise with metering specialists to ensure fiscal and operational metering systems are fit-for-purpose.
• Review and validate PLC, ESD, SCADA, RTU systems, and HMI Configurations.
• Verify implementation of Safety Instrumented Systems (SIF, ESD Logic, Shutdown Sequences, and Cause and Effect Logic) and ensure compliance with IEC 61508 and IEC 61511 requirements.
• Review Fire and Gas (F&G) system design and ensure adequate coverage for the wellhead platform and brownfield packages.
• Review instrumentation related to Pipeline Monitoring, Leak Detection, and Pigging Operations.
• Support and review commissioning procedures for instrument calibration, Loop checking, Functional Testing, Cause and Effect Testing, and ESD Functional Testing.
• Participate in HAZID workshops, HAZOP Reviews, SIL Assessments, Alarm Management Reviews, and Constructability Reviews.
• Lead Instrumentation Weekly meetings with EPC Contractors and ensure timely reports to Technical Managerand Project Manager.

Context and Environment:

• IMA Gas Field Development Project is to develop 1.28 TCF of gas through a 4-slot shallow water conductor-supported well-head platform in 8 – 10m of water to produce 380 MMsfcd at plateau. The production fluid to be transported through an 18”x 15km subsea and 18” x 7km onshore pipeline system to the onshore dehydration system at the NEPL/WAGL – owned Bonny NAG plant that is situated within the Renaissance-operated Bonny Oil and Gas Terminal. Treated gas to be exported to Nigeria LNG.

Accountabilities:

• Technical Integrity and Performance of all instrumentation, control, and safeguarding systems.
• Ensure compliance with applicable COMPANY Standards, regulatory requirements, and international codes.
• Ensure that all Safety Instrumented Systems meet functional safety requirements.
• Minimizing technical risks, operational failures, and project rework resulting from instrumentation designdeficiencies.

Qualifications

• Bachelor’s degree in electrical/electronic engineering, or other relevant disciplines
• 10 years’ experience in the oil and gas industry
• Project management culture

Additional Information:

• This position is open to Nigerian nationals only.

go to method of application »

Activities
The Service Holder shall:

• Ensure the safe design of Offshore Facilities in accordance with Company requirements, project specifications and applicable international standards.
• Coordinate and supervise all safety engineering activities performed by EPC Contractors and specialized Consultants.
• Ensure timely review, consolidation of comments and approval of safety engineering deliverables.
• Verify compliance of contractor studies and recommendations with project requirements and Company standards.
• Promote Safety-in-Design principles throughout all project phases.
• Identify, assess and support resolution of safety-related technical issues.
• Maintain the Safety Action Register and ensure close-out of recommendations arising from safety studies and reviews.
• Participate in technical reviews and technical assurance activities.

Risk Assessment and Safety Studies:

• Coordinate, review and approve all project safety studies and risk assessments.
• Ensure execution and follow-up of:
• HAZID Workshops;
• HAZOP Studies;
• SIMOPS Assessments;
• Quantitative Risk Assessments (QRA);
• Fire and Explosion Risk Assessments;
• Fire & Gas Detection Studies;
• Escape, Evacuation and Rescue Analyses (EERA);
• Dropped Object Studies;
• Bow-Tie Analyses;
• SIL Assessments and Functional Safety Reviews;
• Technological Risk Assessments (TRA);
• ALARP Demonstrations.
• Ensure implementation of recommendations resulting from safety reviews.
• Support development and maintenance of Major Accident Hazard Registers.
• Ensure identification and management of Safety Critical Elements and associated Performance Standards.
• Review design modifications and assess their impact on project risk profile.
• Coordinate management of technical deviations, concessions and change requests affecting all packages related to safety design.

Interface Management:

• Ensure consistency of safety philosophies and risk management approaches across all project packages.
• Manage interfaces with:

Process Engineering;

• Layout and Asset Design Teams;
• Instrumentation and Control Teams;
• Installation and Construction Teams;
• Commissioning Teams;
• Operations and Maintenance Representatives;
• HSE Teams.
• Ensure safety requirements are integrated into design and execution activities.
• Coordinate multidisciplinary inputs required for safety studies and risk assessments.

Procurement and Fabrication:

• Support procurement activities relating to safety.
• Review and approve technical requisitions, specifications, vendor documentation and manufacturing dossiers.
• Monitor Contractor and Vendor performance with respect to engineering, fabrication and manufacturing activities.
• Ensure qualification requirements and technical compliance are maintained throughout procurement and fabrication phases.
• Participate in Factory Acceptance Tests (FATs), technical audits and readiness reviews when required.

Installation and Construction:

• Support construction and installation teams regarding safety engineering matters.
• Review construction-related risk assessments and safety studies.
• Ensure SIMOPS studies are developed and regularly updated.
• Participate in constructability, operability and installation reviews.
• Support management of technical deviations, concessions and Management of Change (MOC) processes from asafety perspective.
• Provide safety engineering support during offshore campaigns as required.

Pre-Commissioning and Commissioning:

• Ensure all safety requirements are adequately addressed during pre-commissioning and commissioning phases.
• Participate in commissioning readiness reviews.
• Review commissioning procedures and start-up philosophies from a safety perspective.
• Support operational risk assessments prior to start-up activities.
• Contribute to handover dossiers and final safety documentation.
• Support preparation for operational phase and safe transition to Operations.
• HSE, Quality and Project Control
• Maintain the highest level of HSE performance throughout all project phases.
• Ensure design and execution activities comply with Company HSE policies and statutory requirements.
• Liaise with Project QHSE and QA/QC teams to ensure the SURF scope is safe, operable and maintainable.
• Assist project management in the assessment and management of technical risks.
• Monitor Contractor performance and support management of change processes.
• Promote continuous improvement and implementation of industry best practices.
• Ensure project objectives regarding safety, quality, schedule and cost are achieved.

Qualifications

• Professional Experience (number of years): 10
• Experience within project and project management: (number of years): 10
• Familiarity with international standards including DNV, API, ISO and Company specifications.
• Previous experience managing EPC Contractors and multidisciplinary interfaces.
• Familiar with Company's standards.

go to method of application »

Activities
Risk & Mitigation:

• Represent PPM in all coordination activities between Major Projects and other entities: Review of planning & work progress, drilling work program, FOPs work program, other project work program etc.
• Act as focal for alignment of priorities with internal clients (QA, Eng, HSE, C&P, FOPS, Drilling, Tech Log, etc.):
• Interface with other entities on the challenges of prompt execution in the initial phases to support successful outcomes.
• Follow up with projects on developing issues and matters arising from coordination meetings with internal clients
• Propose mitigation means / solutions for interface issues resolution
• Identification of Project related risks with proposals for mitigations, and recovery measures.
• Identification and development of KPIs for project Risks
• Conduct risk assessments and develop contingency plans.
• Support project managers in implementing risk management plans.
• Maintain documentation on risk management processes and outcomes.
• Monitor and report risk exposure and risk burndown trends (qualitative and trend-based).
• Support audits (internal/external), PJC reviews, QA/QC, and methodology improvements.

 Performance Management:

• Use Project Definition Rating Index from PR2 to identify the Milestones and LDs into contracts or Items to be instructed via a Scope Change Notice (internal to Company) / Change Order Instruction ( To Contractor).
• Ensure that project performance KPIs / objectives consider potential risks and opportunities.
• Data-driven insights from risk assessments inform performance strategies directly schedule and or costs or less margin.
• Identify how the PPM & project can respond proactively to emerging threats and uncertainties, continuously analyzing lookahead.
• Benefit analysis -balance risk-taking with the achievement of long-term objectives, faster decisions
• Provide support and resources for projects  Propose support to projects to create/improve their processes and procedures.
• Improve and learn from experience  Gather and share lesson learned from projects Nigeria regarding project performance including project benchmarks with One tech and PJC.
• Share regular feedback with local contractors to better work together from one project to another

Accountabilities

• Risk Based Performance Management shall ensure that Project Teams are making best use of previous FEED/CFT analysis such as Project Review 2 findings, qualifications, PDRI, CSRA and formulate updated Project Actions Plans for Projects to review.

Qualifications

• Certification required for the position: Bachelor’s degree in engineering
• Specific knowledge required for the position: Proficiency in use of MS Office Suite, SAP and Primavera P6 (monte-Carlo), Safran.
• Level of experience required for the position: Ten (10) years of experience with a sound oil and gas technical background in onshore, offshore and deep offshore activities.
• PMBOK, PMP, Kaizen and/or Lean Management belt would be a plus.

go to method of application »

Activities
Build Project Management System:

• Support the CMS (to be followed by PPM) by identifying all associated project plans, procedures and templates including ppts for various disciplines. & generic documents, templates, forms standardizing method and improving quality and efficiency, in line with head quarter procedures and guidelines.
• More importantly train people on the existing referential and create workflows for essential use and potential adaption into Prodom and or digital database.
• Create a hierarchy of the key plans and procedures to mirror image the CMS referential to create a one Project approach for processes. Animate/Manage transverse task force to define or improve processes within PPM and projects
• Propose appropriate structure for each project that is appropriate and standardization and consolidation of key documents.
• Provide support and resources for projects
• Propose support to projects to create/improve their processes and procedures.
• Improve and learn from experience
• Gather and share lesson learned from projects Nigeria regarding project performance including project benchmarks with Onetech and PJC.
• Share regular feedback with local contractors to better work together from one project to another

Accountabilities

• Performance Methods engineer shall ensure that Project Teams have adequate templates, project plans and procedures as part of the CMS for Major Projects referential.
• Therefore, monitor the project Teams, application of methods.

Qualifications

• Minimum bachelor’s degree or equivalent
• PMBOK, PMP, Kaizen and or Lean Management belt would be a plus
• Typically, 10 years of oil and gas industry professional experience and with an experience in similar position.