Jobs Career Advice Post Job
X

Send this job to a friend

X

Did you notice an error or suspect this job is scam? Tell us.

    • Jobs at African Foundries Limited

    Posted: Oct 20, 2026
    Expires: Not specified
    Save
    Facebook
    X
    LinkedIn
    Email
    Copy link
  • Get new jobs in your inbox
    • @gmail.com
    • @yahoo.com
    • @outlook.com
  • Register for our free webinar, Proven Strategies to Stand Out and Get Hired in 2027 and find out what’s stopping you from getting called back.

    frican Foundries Limited (AFL) was established to support the accelerating growth in Nigeria by making the country self-reliant for steel rebars and eliminating its dependence on imported rebars. AFL is set up to reach a 0.5 million-ton per year capacity for high strength rebars and allied products.

    View All Jobs at African Foundries Limited


     

    Electrical Technician

    Responsibilities
    Electrical Maintenance:

    • Perform routine inspection, servicing, and maintenance of electrical equipment in the SMS.
    • Maintain and troubleshoot electric arc furnaces (EAF), induction furnaces, ladle furnaces (LF), and associated electrical systems, as applicable.
    • Maintain motors, pumps, fans, blowers, conveyors, gearboxes, and other electrically driven equipment.
    • Inspect and maintain transformers, switchgear, circuit breakers, contactors, relays, and distribution panels.
    • Check electrical cables, busbars, cable terminations, and earthing systems.
    • Carry out preventive and corrective maintenance to reduce equipment breakdowns and production interruptions.

    Electrical Troubleshooting and Repairs:

    • Diagnose electrical faults in motors, control circuits, power distribution systems, and automation equipment.
    • Troubleshoot PLC-controlled systems, sensors, limit switches, proximity switches, and industrial instrumentation.
    • Identify faults in furnace control systems, electrode regulation systems, and hydraulic or pneumatic control circuits.
    • Use electrical testing instruments such as multimeters, clamp meters, insulation resistance testers, and other diagnostic tools.
    • Attend emergency breakdowns and restore equipment to safe operating condition as quickly as possible.
    • Assist in root-cause analysis and implement corrective actions to prevent recurring faults.

    Steel Melting Shop Equipment Support:

    • Support the electrical maintenance of SMS equipment, including:

      • Furnace electrical and control systems.
      • Ladle transfer cars and charging systems.
      • Overhead cranes and material-handling equipment.
      • Continuous casting machine (CCM) electrical drives and control systems.
      • Cooling water pumps and associated utility systems.
      • Dust extraction systems, fume extraction fans, and bag filters.
      • Hydraulic power packs and auxiliary equipment.
    • Monitor equipment performance and report abnormal operating conditions.
    • Coordinate with production and mechanical maintenance teams during planned shutdowns and breakdown maintenance.

    Safety and Compliance:

    • Follow all electrical safety procedures and plant safety regulations.
    • Apply lockout/tagout (LOTO) procedures before working on electrical equipment.
    • Verify isolation and absence of voltage before commencing electrical work.
    • Use appropriate personal protective equipment (PPE).
    • Observe electrical safety requirements when working near high-voltage equipment, hot metal, and furnace operations.
    • Report unsafe conditions, near misses, electrical hazards, and equipment defects.
    • Ensure compliance with applicable electrical standards and company procedures.

    Documentation and Reporting:

    • Record all maintenance activities, breakdown details, and repairs completed.
    • Maintain electrical inspection checklists and equipment maintenance records.
    • Report recurring faults, defective components, and spare-parts requirements.
    • Assist in preparing preventive maintenance schedules.
    • Update maintenance work orders and equipment history records.
    • Provide shift handover reports detailing equipment status and pending maintenance work.

    Qualifications and Experience

    • National Diploma (ND), Higher National Diploma (HND), or equivalent qualification in Electrical/Electronic Engineering or Industrial Electrical Technology.
    • Typically, 2–5 years of industrial electrical maintenance experience, preferably in a steel plant or heavy manufacturing environment.
    • Relevant electrical trade certification or apprenticeship training is an advantage.
    • Experience in a Steel Melting Shop, rolling mill, foundry, or similar heavy industrial facility is preferred.
    • Knowledge of industrial motors, motor control circuits, electrical protection systems, and troubleshooting techniques.
    • Experience with PLCs, variable frequency drives (VFDs), soft starters, and industrial automation is an advantage.
    • Familiarity with high-voltage and low-voltage electrical systems, where appropriately trained and authorized.

    go to method of application »

    Total Productive Maintenance (TPM) Officer

    Key Responsibilities and Duties
    Total Productive Maintenance (TPM) Implementation:

    • Implement and sustain TPM practices across the steel plant.
    • Coordinate the eight pillars of TPM, including Autonomous Maintenance, Planned Maintenance, Focused Improvement, Quality Maintenance, Early Equipment Management, Training and Education, Safety, Health and Environment, and Office TPM, as applicable.
    • Develop and monitor TPM implementation plans, schedules, and performance targets.
    • Promote employee involvement in equipment care and continuous improvement activities.
    • Support production and maintenance teams in identifying and eliminating equipment-related losses.
    • Conduct regular TPM audits and monitor compliance with established standards.
    • Facilitate TPM meetings, equipment improvement teams, and shop-floor improvement activities.

    Preventive and Predictive Maintenance:

    • Develop, review, and optimize preventive maintenance schedules for mechanical equipment.
    • Ensure timely execution of lubrication, inspection, adjustment, cleaning, and component replacement activities.
    • Implement predictive maintenance techniques such as vibration analysis, thermography, oil analysis, and condition monitoring.
    • Identify equipment deterioration at an early stage and recommend corrective actions.
    • Review equipment maintenance history to identify recurring failures and opportunities for improvement.
    • Coordinate planned maintenance shutdowns with production and other maintenance departments.
    • Ensure maintenance activities are properly documented in the Computerized Maintenance Management System (CMMS), where available.

    Mechanical Equipment Reliability and Maintenance:

    • Monitor the reliability and performance of critical steel plant equipment, including:
      • Rolling mill stands, gearboxes, bearings, and drive systems.
      • Steel Melting Shop (SMS) auxiliary mechanical equipment.
      • Continuous Casting Machine (CCM) mechanical systems.
      • Pumps, compressors, fans, blowers, and hydraulic systems.
      • Conveyors, transfer tables, and material-handling systems.
      • Industrial cranes and lifting equipment.
      • Cooling water systems, lubrication systems, and centralized grease systems.
    • Analyze recurring mechanical failures and recommend permanent corrective measures.
    • Support troubleshooting and repair of equipment breakdowns.
    • Ensure proper alignment, balancing, installation, and commissioning of rotating equipment.
    • Monitor equipment wear, vibration, temperature, lubrication condition, and abnormal operating behavior.
    • Improve equipment maintainability and reduce unplanned production interruptions.

    Autonomous Maintenance:

    • Support production operators in carrying out routine equipment inspection, cleaning, lubrication, and tightening activities.
    • Develop and implement autonomous maintenance checklists and inspection standards.
    • Train operators to identify abnormalities such as oil leaks, loose fasteners, abnormal vibration, overheating, and unusual noise.
    • Establish equipment cleaning and inspection standards to prevent deterioration.
    • Coordinate with production teams to close abnormalities identified during routine inspections.
    • Promote ownership of equipment condition among operators and maintenance personnel.

    Root Cause Analysis and Continuous Improvement:

    • Conduct root cause analysis (RCA) for major equipment failures and repeated breakdowns.
    • Apply problem-solving techniques such as the 5 Whys, Fishbone Diagram, Pareto Analysis, and Failure Mode and Effects Analysis (FMEA).
    • Develop and implement corrective and preventive action plans.
    • Lead focused improvement projects to eliminate chronic equipment problems.
    • Identify opportunities to reduce mechanical losses, maintenance costs, spare-parts consumption, and equipment downtime.
    • Apply Kaizen and other continuous improvement methods to improve plant performance.
    • Verify the effectiveness of corrective actions through follow-up inspections and performance monitoring.

    Spare Parts and Maintenance Planning:

    • Identify critical mechanical spare parts and establish appropriate minimum and maximum stock levels.
    • Coordinate with stores and procurement teams to ensure the availability of essential maintenance materials.
    • Review spare-parts consumption and identify opportunities for standardization and cost reduction.
    • Assist in preparing annual maintenance budgets and shutdown maintenance plans.
    • Ensure proper technical specifications for replacement parts and mechanical components.
    • Support vendor evaluation, equipment selection, and technical discussions where required.

    Performance Monitoring and Reporting:

    • Monitor key TPM and maintenance performance indicators.
    • Prepare daily, weekly, and monthly reports on equipment performance and maintenance activities.
    • Track Overall Equipment Effectiveness (OEE), equipment availability, MTBF, MTTR, and breakdown frequency.
    • Monitor planned maintenance compliance and outstanding equipment abnormalities.
    • Conduct performance reviews and recommend corrective actions where targets are not achieved.
    • Maintain equipment history, inspection records, audit reports, and improvement project documentation.

    Safety, Health, and Environmental Compliance:

    • Ensure all mechanical maintenance activities comply with plant safety procedures.
    • Enforce Lockout/Tagout (LOTO), permit-to-work, and equipment isolation procedures.
    • Ensure compliance with machine guarding, lifting, rigging, and working-at-height requirements.
    • Identify mechanical hazards and implement appropriate risk-control measures.
    • Ensure safe maintenance practices around hot metal, rotating machinery, hydraulic systems, and pressurized equipment.
    • Participate in safety inspections, incident investigations, and corrective action reviews.
    • Promote safe working practices and good housekeeping throughout the plant.

    Key Performance Indicators (KPIs)
    Performance will be measured using the following indicators:

    • Overall Equipment Effectiveness (OEE): Improvement in equipment availability, performance, and quality.
    • Mean Time Between Failures (MTBF): Increase in the average operating time between equipment failures.
    • Mean Time to Repair (MTTR): Reduction in average equipment repair time.
    • Breakdown Frequency: Reduction in unplanned mechanical failures.
    • Preventive Maintenance Compliance: Percentage of scheduled maintenance tasks completed on time.
    • Planned Maintenance Ratio: Increase in planned maintenance compared with reactive maintenance.
    • Maintenance Cost: Reduction in maintenance costs per tonne of steel produced, where measurable.
    • TPM Audit Score: Improvement in compliance with TPM standards and implementation plans.
    • Autonomous Maintenance Compliance: Percentage of completed operator inspection and equipment care activities.
    • Corrective Action Closure: Percentage of RCA and audit action items closed within agreed deadlines.
    • Safety Performance: Compliance with safety procedures and reduction in maintenance-related incidents.
    • Spare Parts Availability: Improved availability of critical mechanical components.

    Qualifications and Experience

    • Bachelor's Degree in Mechanical Engineering or an equivalent qualification.
    • HND in Mechanical Engineering may be acceptable where supported by relevant industrial experience and company requirements.
    • Typically, 3–5 years of experience in mechanical maintenance, equipment reliability, or TPM implementation in a steel plant or heavy manufacturing industry.
    • Practical knowledge of preventive and predictive maintenance systems.
    • Experience in rolling mills, Steel Melting Shops, Continuous Casting Machines, or other steel production equipment is an advantage.
    • Knowledge of TPM, Lean Manufacturing, Kaizen, 5S, and continuous improvement methodologies.
    • Experience with CMMS or maintenance management software is desirable.
    • Relevant training or certification in TPM, reliability engineering, vibration analysis, or maintenance planning is an advantage.

    Technical Skills and Competencies:

    • Strong knowledge of industrial mechanical systems and rotating equipment.
    • Understanding of bearings, gearboxes, couplings, shafts, chains, belts, and lubrication systems.
    • Knowledge of hydraulic and pneumatic systems.
    • Ability to interpret mechanical drawings, assembly drawings, and equipment manuals.
    • Knowledge of vibration monitoring, alignment, balancing, and condition-based maintenance.
    • Ability to perform equipment failure analysis and develop corrective action plans.
    • Understanding of maintenance planning, scheduling, and shutdown management.
    • Proficiency in Microsoft Excel, Word, and maintenance reporting tools.
    • Familiarity with OEE, MTBF, MTTR, FMEA, RCA, and Pareto analysis.

    Method of Application

    Interested and qualified candidates should send their CV to: folajimi.omolara@africanfoundries.com using the Job Title as the subject of the email. 

    Build your CV for free. Download in different templates.

  • Save Report job
  • Get new Engineering / Technical jobs on TelegramNew jobs like this, as they are posted
  • Send your application

Career Advice

View All Career Advice
 

Subscribe to Job Alert

 

Join our happy subscribers

 
 
Send your application through

GmailGmail YahoomailYahoomail