Latest Jobs at Western Development Company Limited (WDCL)

Roles and Responsibilities

The Electrical Technician will be responsible for the following:

• Interpretation of equipment instruction and maintenance manuals, schematic drawings and diagnosis.
• Installation and repair of LV circuits/equipment.
• Use of diagnostic tools and Electrical hand tools for testing and fault tracing in Hazardous Area Classifications.
• Asset Integrity assurance, PM/CM execution and support close-out on SAP.
• Work preparations and material staging for work executions.
• Daily proactive monitoring of rotating and safety & production critical equipment.
• Isolation/De-isolation of electrical equipment for Electrical/non-electrical activities.
• Job Risk Assessments / Permit to Work Preparation.
• Identifying critical spares and follow-up ordering and delivery.
• Switching in power distribution systems.
• Promotes site safety and continuous hazard identification, mitigation, and close-out.
• Work closely with service Contractor(s) for safe delivery of vendor-based maintenance jobs.

Work Experience

• Minimum of 5 years working in an oil and gas producing field location.
• Prior experience in an SPDC location/Terminal should be an added advantage.

Key Skills:

• Operation and maintenance of LV power Generation and distribution systems (Experience with the following generators is an added advantage; CAT G3512, G3306, D3412, D3304,).
• Experience in Electric Motors and control systems maintenance.
• Experience in Atlas Copco systems and mobile compressor maintenance.
• Experience in Utility Distribution boards and lighting systems maintenance.
• Experience in maintenance of water-well sumo pumps.
• Competent Electrical Person
• Experience in Lightning and Earthing system inspections.
• Excellent analytical and problem-solving skills.
• Skill in Electrical Equipment and systems maintenance, troubleshooting and fault analysis.

Soft Skills:

Added Advantage:

• Computer literate (Competent user of Microsoft Office and ability to liaise with programs)
• Knowledge and use of the Permit to Work system.
• Knowledge of worksite hazard management
• Ability to multitask effectively
• Good Communication skills & a team player
• Ability to work under pressure with resilience
• Good organizational skills
• Flexibility and adaptability.
• Self-motivated and performs under minimal supervision.

Work Cycle and Conditions

• The work location is in the West Shell facilities accessible via water and air.
• The job activity period is daily on a 12-hour (7 am to 7 pm) routine over a 14-day, 21-day cycle period.
• The successful candidate will manage their own absences with his/her contractor for suitably qualified covers. There may be a need for periodic visits to the Shell industrial area for training and official assignments. Personnel may be required to work extended hours as the need arises.
• Personnel may be required to work extended hours as the need arises.

go to method of application »

Roles and Responsibilities

The Field Operator services support will be responsible for the following:

• Apply the emergency response procedure where and when necessary.
• Report and close out Unsafe Acts and Unsafe Conditions.
• Serves as a permit-to-work signatory and administers safe system of work.
• Apply the Health Safety Security and Environment policy, legislations applicable to crude oil transfer and export.
• Carry out first line maintenance on pumps, motors, separators, and valves.
• Adhere to plant operational procedures.
• Start-up and Shutdown of Oil and Gas facilities.
• Perform daily first line monitoring of process parameters and variables.
• Execute daily communication and Shift handover.
• Prepare equipment for maintenance interventions plant isolation etc.
• Collaborate with other disciplines to execute planned activities.
• Collaborate with Plant operators to execute front line maintenance activities in the plant.
• Perform proper housekeeping within the plant.
• Serve as focal point for operational registers.
• Maintain defective equipment register for plant.
• Direct the operation of the vacuum truck.

Work Cycle:

• The work location is Bonny Oil and Gas Terminal) accessible via water and Air.
• The job activity period is daily on 12-hour (7am to7pm) routine over a 21-day period.
• There is a standard 3weeks on and 3weeks off schedule.
• The successful candidate will manage own absences with his/her contractor for suitable qualified covers.
• There may be need for periodic visits to Shell industrial area for trainings and official assignments.

Minimum Requirements

• OND / HND in Sciences / Engineering with 3 - 8 years of work experience as a field operator in an oil and gas facility or SSCE/WAEC with a minimum of 10 years of work experience as a field operator in an oil and gas facility.
• Minimum of one year: as a Drains/Front Line Maintenance/Instrument air and fuel gas/Intake operator/Last Line of Defense operations/New process Area operations/water treatment facility/Control Room Operator/Hydrocarbon Oil accountant
• Ability to read and interpret process engineering flow schemes (PEFS)
• Computer literate with proficiency in Microsoft Office tools (Excel, PowerPoint, and Word)
• Problem-solving and good analytical skills.
• Basic Knowledge of Terminal Operations
• Basic knowledge of Process and Personal Safety
• Basic knowledge of Oil recovery operations

Skills:

(Added advantage)
Control Room Operator:

• T_BOSIET certification
• Experience in the operation of 3-phase separators, compressors, pumps and other crude oil processing equipment
• A good understanding of the working principles of field instrumentation and process automation systems.

Drains:

• T_BOSIET certification
• IMO leve1, 2 certification
• Experience responding to crude oil spills.
• Experience in maintenance of hoses.
• Experience in the operation of vacuum trucks

Front Line Mtce:

• T_BOSIET certification
• Experience in the maintenance of hydrocarbon and water processing equipment.
• Mechanical discipline bias

Utility – Instrument Air and Fuel Gas:

• T_BOSIET certification
• Experience in the maintenance of air compressors.
• A good understanding of the working principles of field instrumentation and process automation systems.

Intake Operator:

• T_BOSIET certification
• Experience in offshore operations
• Experience in crude oil fiscal measurement activities
• Experience in crude oil sampling and collection (handling)

Last Line of Defense:

• T_BOSIET certification
• Experience responding to crude oil spills.
• Experience in maintenance of hoses.
• Experience in operation of open drain water treatment facility

New Process Area:

• T_BOSIET certification
• Experience in maintenance of pumps, manual valves, and sight glass of vessels.
• A good understanding of the working principles of field instrumentation and process automation systems.

Utility - Water Treatment System:

• T_BOSIET certification
• Experience in the maintenance of pumps, sight glass, and valves
• A good understanding of the working principles of field instrumentation and process automation systems.

Hydrocarbon Accountant:

• T_BOSIET certification
• Experience in the preparation of documents for crude oil export
• Experience in preparation of visualization report

Soft Skills:

• Onsite Hazard identification and Risk assessment capability.
• Problem-solving and good analytical skills.
• Excellent verbal and oral communication skills
• Ability to work in a diverse team.
• Self-motivated and performs under minimal supervision.
• Ability to trend and analyse data sets.
• Ability to understand and perform production operations (volume, pressure) calculation.
• Ability to understand units of various variables i.e., pressure, volume, flow rate etc.
• Ability to work in a diverse team and with external stakeholders.

go to method of application »

Roles and Responsibilities

The Field Operator Supervisor will be responsible for the following:

• Lead a team of operators to deliver simple and complex activities in the plant.
• Manage the shutdown permitry and isolation management process.
• Apply the emergency response procedure where and when necessary.
• Report and close out UA/UC.
• Serves as PTW signatory.
• Apply the HSSE policy, and legislation applicable to crude oil transfer and export.
• Adhere to plant operational procedures.
• Monitor, control and record production rates and performance.
• Start-up and commissioning of installation.
• Perform basic troubleshooting on process facilities to ensure stability.
• Perform daily first-line monitoring of process parameters and variables.
• Gather daily production data, and determine the production performance.
• Participate in console review meeting, Daily notification and YTT review meeting
• Prepare daily production reports for DPR
• Execute daily communication and Shift handover
• Ensure optimized chemical injection rates are followed as advised.
• Prepare equipment for maintenance interventions plant isolation etc.
• Collaborate with other disciplines to execute planned activities.
• Supervise preparation of equipment for maintenance including isolation, draining, steaming, and other procedures as required.

Asset Management:

• Contract Management – Processing of Service Entries, PR/PO, Catering Bills and Chargeback
• West Demand Planning/Execution
• Managing Logistics for Terminal staff and visitors - booking of flights and personnel carriers.
• Support the Business Finance Unit in Managing the Terminal Budget
• Serve as Focal Point for Co-ordinating Terminal Estate Services
• Vendor Relationship and Performance Management- Track Staff Salary Payment, Pension Remittance and General Vendor Performance
• West Demand Planning/Execution
• Coordinate YTT (Yesterday, Today, Tomorrow), Notifications, Scheduling and FSR (Facility Status Report) Reviews/Engagements
• Manage Terminal Fleet and daily fuel collection.
• Plan and supervise safe execution of Field/Environment Maintenance.
• Co-ordination West Cost Leadership Panel for the Terminal
• Apply the emergency response procedure where and when necessary.
• Report and close out UA/UC.
• Collaborate with other disciplines to execute planned activities.
• Execute daily communication and Shift handover.
• Follow-up Procurement for ordered spares and materials until delivery.
• Raise and achieve budgetary approval for procurement of materials and services.
• To enable the end-to-end process of material purchasing using Companies Material Management “ways of working” and manage the Requisition-to-Pay (RtP) Process.

Work Cycle:

• The work location is a Swamp-field based in the West Shell Facilities accessible via water and Air.
• The job activity period is daily on a 12-hour (7 am to 7 pm) routine over 21 days.
• There is a standard 3-week on and 3-week off schedule.
• The successful candidate will manage their absences with his/her contractor for suitably qualified covers.
• There may be a need for periodic visits to the Shell industrial area for training and official assignments.
• Personnel may be required to work extended hours as the need arises.

Work Experience

• Minimum of 5 to 12 years working as a field operations support, technician or permit coordinator in an oil and gas-producing field location.
• Asset Management and Logistics support Experience in SPDC.
• Must have at least five (5) years’ experience in SPDC terminal operations.

Skills:

(Added advantage):

• Ability to read and interpret process engineering flow schemes (PEFS) and process documents.
• Skill-level knowledge in running/managing permit systems.
• Understanding of Forcados Terminal Process Operations and control room activities.
• Computer literate with proficiency in Microsoft Office tools (Outlook, Excel, PowerPoint, and Word)
• Excellent verbal and oral communication skills
• Problem-solving and good analytical skills.
• Self-motivated and performs under minimal supervision.
• Experience in leading and supervising others in field operations tasks.
• Experience in site project supervision and commissioning.

Soft Skills:

• Ability to understand and perform production operations (volume, pressure) calculation.
• Ability to understand units of various variables i.e., pressure, volume, flow rate etc.
• Onsite Hazard identification and Risk assessment capability.
• Flexibility and adaptability.
• Problem-solving and good analytical skills.

go to method of application »

Job Description

• We are seeking an experienced Bidding Engineer to join our team and lead the preparation and submission of bids for engineering projects within the Oil & Gas industry. The Bidding Engineer will play a critical role in securing new business opportunities by developing competitive and compelling proposals that meet client requirements and objectives.
• The ideal candidate will have a strong technical background in engineering and significant experience in bid management and tendering processes.

Responsibilities

• Lead the bid management process for engineering projects, from initial client inquiry to bid submission, ensuring compliance with all tender requirements and deadlines.
• Review client specifications, scope of work, and technical requirements to develop comprehensive bid proposals that address client needs and objectives.
• Coordinate with internal teams, including engineering, project management, procurement, and finance, to gather relevant information and inputs for bid preparation.
• Conduct technical evaluations, risk assessments, and cost estimations to determine project feasibility, pricing strategy, and resource requirements.
• Prepare and compile all necessary documentation for bid submissions, including technical proposals, commercial offers, qualifications, and supporting materials.
• Liaise with clients, consultants, subcontractors, and suppliers to clarify bid requirements, negotiate terms, and address any queries or concerns.
• Ensure compliance with all legal, contractual, and regulatory requirements throughout the bidding process, including adherence to company policies and procedures.
• Participate in bid clarification meetings, site visits, and presentations to present technical solutions, clarify project details, and address client feedback.
• Track and monitor bid outcomes, including success rates, feedback, and lessons learned, and use insights to continuously improve bidding strategies and processes.
• Collaborate with business development, sales, and marketing teams to support lead generation, client relationship management, and market intelligence activities.

Skills and Qualifications

• Bachelor’s Degree in Engineering or related field; Master’s degree is a plus.
• Minimum of 7 years of experience in engineering, project management, or related roles, with a focus on bid management and tendering processes.
• Proven track record of successfully preparing and submitting bids for engineering projects, particularly within the Oil & Gas industry.
• Strong technical background in engineering disciplines relevant to Oil & Gas projects, such as mechanical, civil, electrical, or process engineering.
• Excellent understanding of bid management principles, tendering procedures, and contract negotiations.
• Proficiency in cost estimation, budgeting, and financial analysis, with the ability to develop competitive pricing strategies and commercial offers.
• Advanced skills in project management tools and software, such as Microsoft Project, Primavera P6, or equivalent.
• Excellent written and verbal communication skills, with the ability to articulate technical concepts and solutions clearly and concisely.
• Strong analytical and problem-solving abilities, with attention to detail and accuracy in bid documentation and analysis.
• Ability to work effectively under pressure, manage competing priorities, and meet tight deadlines in a fast-paced environment.

go to method of application »

Job Description

• We are currently seeking a highly experienced and qualified Finance/Account Manager to oversee all financial operations and accounting functions within our organization.
• The Finance/Account Manager will play a critical role in managing financial risks, ensuring compliance with regulatory requirements, and providing strategic financial guidance to support business growth and profitability.
• The ideal candidate will have a strong background in finance and accounting, with extensive experience in the Oil & Gas industry.

Responsibilities

• Oversee the day-to-day financial operations of the company, including financial planning, budgeting, cash flow management, and financial reporting.
• Develop and implement financial policies, procedures, and controls to ensure accuracy, transparency, and compliance with regulatory standards and industry best practices.
• Manage the preparation of financial statements, reports, and forecasts, and present financial performance metrics to senior management and stakeholders.
• Monitor and analyze financial data and key performance indicators (KPIs) to identify trends, variances, and opportunities for improvement, and make recommendations for strategic decision-making.
• Lead the annual budgeting process and long-term financial planning initiatives, working closely with department heads and senior management to align financial goals with business objectives.
• Manage relationships with banks, financial institutions, auditors, and other external stakeholders, and ensure timely and accurate compliance with all statutory and regulatory requirements.
• Coordinate with project teams, procurement, and accounting staff to track project costs, revenue recognition, and billing processes, ensuring accuracy and completeness of financial records.
• Lead financial risk management activities, including assessment of credit risk, foreign exchange exposure, and hedging strategies, to mitigate financial risks and optimize financial performance.
• Provide strategic financial guidance and support to senior management on investment decisions, capital allocation, and business expansion initiatives.
• Mentor and develop finance and accounting staff, fostering a culture of continuous learning, professional development, and high performance.

Requirements

• Bachelor's Degree in Accounting, Finance, Business Administration, or related field; Master’s degree or professional certification (e.g., ACCA, CPA, CFA) is preferred.
• Minimum of 10 years of progressive experience in finance and accounting roles, with at least 5 years of experience in a managerial or leadership capacity.
• Extensive knowledge of financial principles, accounting standards, taxation, and regulatory requirements, particularly in the Oil & Gas industry.
• Proven track record of financial management, budgeting, forecasting, and financial analysis, with a focus on driving business performance and profitability.
• Strong leadership and team management skills, with the ability to inspire, motivate, and develop a high-performing finance team.
• Excellent communication and interpersonal skills, with the ability to interact effectively with senior management, board members, and external stakeholders.
• Advanced proficiency in financial modeling, spreadsheet analysis, and financial management software (e.g., SAP, Oracle, QuickBooks).
• Demonstrated ability to work collaboratively across functions and departments, with a customer-centric approach to financial management and decision-making.
• Strategic mindset, with the ability to think analytically, anticipate future trends, and develop innovative solutions to complex financial challenges.
• High level of integrity, professionalism, and ethical conduct, with a commitment to upholding the highest standards of financial governance and compliance.