Jobs Career Advice Signup

Send this job to a friend


Did you notice an error or suspect this job is scam? Tell us.

  • Posted: May 2, 2024
    Deadline: Not specified
  • Never pay for any CBT, test or assessment as part of any recruitment process. When in doubt, contact us

    International Breweries Plc was incorporated in December 1971 by its founder and first Chairman, Dr. Lawrence Omole under the name International Breweries Limited. The Company commenced production of its flagship product Trophy Lager in December 1978 with an installed capacity of 200,000 hectoliters per annum. Following the increasing demand for its produ...
    Read more about this company


    Brewing Instrument Artisan

    The key purpose of this role is to operate, maintain, and plant and associated devices to ensure plant availability and product quality, maintain equipment and process control equipment systems in the Brewing and E&F plant and conducts maintenance and troubleshooting on measurement and control.

    Key roles and responsibilities:

    Maintain a Safe and Healthy Working Environment

    • Comply with safety, health and environmental procedures and legislation
    • Maintain safety and housekeeping standards

    Maintain, Repair, and Optimise Plant and Associated Devices

    • Locate plant, equipment, spares and relevant documentation systems
    • Plan and prepare the job
    • Carry out repairs or maintenance
    • Continuously improve (optimize) plant, process equipment and systems

    Operate Process

    • Prepare for production
    • Operate and monitor machine performance
    • Start up machines
    • Run the machines
    • Perform brand and pack change
    • Carry out machine lubrication
    • Ensure cleaning of machines

    Optimize Production Performance

    • Interpret and implement production plan for the shift
    • Measure and record performance attributes
    • Optimize usage of resources
    • Support the team to improve process quality
    • Facilitate team problem solving
    • Monitor trends and initiate corrective action
    • Perform running schedules.

    Apply the VPO Principles and Practices

    • Apply 5S standards and practices in the workplace
    • Operate and control the process according to SOP’s
    • Conduct autonomous maintenance.
    • Manage quality at source
    • Improve personal competence and flexibility
    • Maintain a safe and healthy work environment

    Apply Problem Solving Processes

    • Utilize short interval control to identify problems
    • Apply problem solving techniques to resolve situational problems


    • Relevant Technical Qualification / Diploma/HND/BSc.
    • 1-2 years relevant work experience and/or on the job training.
    • Experience within a Brewing / FMCG industry

    go to method of application ยป

    Utilities Process Artisan

    The key purpose of this role is the operation of the process area according to work instructions, the execution of non- destructive quality checks and carrying out of routine maintenance. The process artisan has a primary focus on the asset care activities of the team.

    Key roles and responsibilities

    Operating & Process Control

    • Operating the process area according to the work instructions and adhering to usage standards
    • Carrying out the required quality checks as described in the quality control and analysis work practice
    • Recording waste on the appropriate documentation or information systems, and reviewing waste trends to identify problems or opportunities timeously
    • Constantly reviewing process performance against target, and completing all short interval control documentation
    • Responding rapidly to upstream or downstream triggers that result in stoppages
    • Appropriate problem solving approaches, as detailed in the problem solving work practice must be followed
    • Performing housekeeping tasks, applying 5s principles and following safe work practices
    • Unsafe work practices must be identified and corrected
    • Assisting fellow team members in the execution of their tasks

    Maintenance of Plant & Equipment

    • Carry out in-depth cleaning, lubrication and inspection of machines according to the work instructions, and following the schedules supplied by the maintenance planner
    • Carrying out routine maintenance activities according to the maintenance schedule. Where routine maintenance reveals larger problems, and the process artisan is unable to resolve these, it must be escalated to the team leader
    • Taking part in maintenance and cleaning days
    • This must be done in support of maintenance specialist support
    • Monitoring trends when conducting routine maintenance
    • Where trends indicate the existence of underlying problems, corrective action must be Quality Control and Analyses taken
    • This corrective action may involve the SBU, the maintenance controller or maintenance support
    • When operating, the process artisan must carry out the non-destructive quality checks and analyses
    • The list of checks to be carried out are contained in the work instructions
    • Recording the results of quality checks on the relevant documentation or information system
    • Where production does not meet quality standards the process artisan must try to identify and resolve problems using the appropriate techniques
    • If they are unable to resolve the problem themselves, it must be escalated to the team leader for further direction


    • Actively participating in shift meetings, asking questions to test understanding and contributing suggestions
    • Making use of the gap list to record issues, problems and improvement opportunities
    • Fully understanding the team goals and participating in team goal review sessions
    • Where FFA's have been initiated, the process artisan may be asked to participate
    • Making use of relevant communication media (e.g. shift logbook) to stay informed and inform others of issues

    Problem Solving

    • When problems occur, applying the appropriate techniques (e.g. 5y, quick fix routines etc.) the identify and correct the problem
    • Where the process artisan is unable to resolve the problem, involve fellow team members or escalate to the team leader if necessary
    • Where problems have been resolved, verify that the problems have been eliminated
    • Continuous Improvement Using run/control charts and trend analysis, to identify sources of waste and variation in the process
    • Using short stop analysis, Pareto charts and other tools seek to identify opportunities to simplify activities
    • Where improvement opportunities have been identified, these must be recorded on the team gap list
    • The process artisan should involve other team members in evaluating opportunities and call in specialist resources to assist if required

    Key Attributes & Competencies

    • Ability to solve problems on FMCG machines
    • Ability to communicate technical knowledge to operation staff improving their skills sets
    • Ability to train, coach and mentor operation staff on ATO and 5’s principles
    • Ability to optimise usages and reduce wastage with permanent solutions
    • Interpersonal Skills
    • Work in Teams and Collaborate
    • Strong self-management practices
    • Ability to problem solve using basic problem solving tools (5 why; fishbone)and involved in high level problem solving to identify root causes and loop closures – AB Reports , SDCA, PDCA
    • Ability to reduce machine downtime to minimum while ensuring the all problems have permanent solutions
    • Ability to analyse various graphical data and open gaps to improve performance
    • Ability to identify non-standard work and tag the defects with root causes
    • Ability to identify required spares for restorations tasks and communicate with suppliers for the best possible price thus showing savings on ZBB
    • Ability to be able to use electronic communication devices e.g. Tablets, laptops and other devices to help you understand the specific machines in more in detail
    • Ability to understand camera technology and different type of algorithms
    • Ability to understand software, bus systems( Asibus, Profibus, Canbus, Ethernet, Ethercat)  only for Electrical and Instrument
    • Always looking for opportunities to improve MTTB and shorten MTTR


    • Min. of B.Sc./HND/B.Tech in Electrical or Mechanical Engineering.
    • 2-3 Years’ experience in FMCG environment
    • Proficiency in the use of Microsoft office applications i.e. (Microsoft Excel, Word, and PowerPoint)
    • Min- 2 years working experience in Manufacturing
    • Ability to communicate well
    • Must be a team player
    • Ability to adhere to instructions, work in shifts with minimum supervision & action oriented
    • Sober mind, self-starter, physically fit and honest

    Method of Application

    Use the link(s) below to apply on company website.


    Build your CV for free. Download in different templates.

  • Send your application

    View All Vacancies at International Breweries Back To Home

Subscribe to Job Alert


Join our happy subscribers

Send your application through

GmailGmail YahoomailYahoomail