Job Vacancies at Ascentech Services Limited

Summary

• Our client is is looking to strengthen their production operations with the addition of an Electrical Engineer
• The Electrical Maintenance Technician to look after the electrical system of our factory.
• The incumbent will be required to conduct general maintenance inspections, perform routine electrical maintenance, respond to faults and wiring issues, and install electrical appliances for the company.

Responsibilities

• Routinely inspecting electrical systems such as wiring, fixtures, and appliances.
• Identifying faults or hazards
• Knowledge of Electrical systems, hand tools, and industrial equipment
• Troubleshooting system failures
• Testing of electrical systems with digital multi-meter.
• Conducting maintenance repairs on old or faulty fixtures
• Responding to fault requests
• Providing suggestions for equipment replacement.
• Writing electrical maintenance reports.
• Installing new electrical appliances (D & I) in the factory
• Ability to resolve the problem with minimum time
• Ability to work on the following: star/Delta starter, DOL starter, VFD, Electrical motor, temperature controller, level sensor, Interlocking system, PCC, MCC, Operation of Generator, Synchronizing of Generator
• Knowledge of ACB/VCB operation and maintenance,
• Ability to understand sizing of cable, Overload relay, contactor according to size of Electric Motor.

Requirements

• Minimum of 5 years factory working experience in a Plastic Manufacturing space
• B.Sc / HND / Technical Certificate in Electrical / Electronic Engineering
• Experience in Plastic manufacturing industry is an advantage.
• Knowledge of infrared sensors/proximity sensors, VFD and Electric motors.
• Draw and interpret electrical/wiring diagrams and schematics
• Knowledge and operation of power generation and distribution systems
• Knowledge and operation of electrical troubleshooting/diagnostic devices
• Experience in Boiler Electrical Maintenance
• Reporting skill for material, breakdown.

go to method of application »

Summary

• The Electrical Maintenance Technician to look after the electrical system of our factory.
• The incumbent will be required to conduct general maintenance inspections, perform routine electrical maintenance, respond to faults and wiring issues, and install electrical appliances for the company.

Responsibilities

• Routinely inspecting electrical systems such as wiring, fixtures, and appliances.
• Identifying faults or hazards
• Knowledge of Electrical systems, hand tools, and industrial equipment
• Troubleshooting system failures
• Testing of electrical systems with digital multi-meter.
• Conducting maintenance repairs on old or faulty fixtures
• Responding to fault requests
• Providing suggestions for equipment replacement.
• Writing electrical maintenance reports.
• Ability to resolve the problem with minimum time
• Ability to work on the following: star/Delta starter, DOL starter, VFD, Electrical motor, temperature controller, level sensor, Interlocking system, PCC, MCC, Operation of Generator, Synchronizing of Generator
• Knowledge of ACB/VCB operation and maintenance, Ability to understand sizing of cable, Overload relay, contactor according to size of Electric Motor.

Experience / Essential Requirements & Qualifications

• Minimum of 5 years working experience in a Mining Company.
• ND / Trade Test 1, 2, 3 / Technical Certificate in Electrical / Electronic Engineering
• Minimum of 7 years’ experience in Mining Factory in electrical maintenance.
• Experience Generators, Motors, SCADA, and PLC
• Preferably from oil extraction/oil refinery.
• Able to understand electrical drawings.
• Coordination skill with others.
• Reporting skill for material, breakdown.

go to method of application »

Job Brief

• Sales Officer responsibilities include discovering and pursuing new sales prospects, negotiating deals and maintaining customer satisfaction.
• If you have excellent communication skills and feel comfortable reaching out to potential customers to demonstrate our services and products through email and phone, we’d like to meet you.

Responsibilities

• Conduct market research to identify selling possibilities and evaluate customer needs
• Actively seek out new sales opportunities through cold calling, networking and social media
• Set up meetings with potential clients and listen to their wishes and concerns
• Prepare and deliver appropriate presentations on products and services
• Create frequent reviews and reports with sales and financial data
• Ensure the availability of stock for sales and demonstrations
• Participate on behalf of the company in exhibitions or conferences
• Negotiate/close deals and handle complaints or objections
• Collaborate with team members to achieve better results
• Gather feedback from customers or prospects and share with internal teams

Requirements and Skills

• Candidates should possess an HND / B.Sc with 1-2 years work experience.
• Proven experience as aSales Officer with a FMCG company
• Proficiency in English
• Passion for sales.

go to method of application »

Location: Ikorodu, Lagos
Directly Reports to: Production Manager
Industries / Sector: Plastic Recycling Company

Job Responsibilities

• Planning and scheduling production activities and supervising the production process.
• Ensuring the effective management of production line.
• Making sure the good are produced on time.
• Estimating production costs and determining the high quality standard.
• Ensuring maintenance of cost effective and high quality standards.
• Monitoring the production practices and setting the schedules as required.
• Working out the materials and human resources as needed.
• Taking decision regarding the operating unit’s layout, size and range of production to deliver and arrangement of work processes.
• Keeping abreast of health and safety strategies.
• Liaising with different departments such as maintenance managers to prevent ant probable delay in production
• Supervising product standards and enforcing quality control programs
• Work with shift supervisor and direct the work of all employees in the maintenance unit
• Reviewing the performance of all staff within your department and identifying training necessities for them
• Carry out other duties that may be assigned from time to time by the General Manager

Job Requirements

• Bachelor's Degree in Electronic, Mechanical or Electrical Engineering
• Should have minimum of 3 -5 year experience
• Experience for the position
• Good interpersonal and communication skills
• Good time management and planning skills

Good organizational and administrative skill:

• Ability to resolve problems and work well in tight deadlines
• Ability to pay attention to minute detail and quality

go to method of application »

Responsibilities

• Evaluate all engineering drawings and ensure implementation according to welding specifications.
• Perform all welding work with help of forming and cutting equipments.
• Provide assistance to production process and mould various fixtures.
• Design and produce new parts according to BUCYRUS specifications.
• Perform efficient welding of various metal objects with help of gas torch and welder.
• Perform repair to damage alloy articles and prepare new articles with help of welding machines.
• Perform work with help of various hand and power tools.
• Analyze diagrams and specifications and cut all metal accordingly with help of welding torch.
• Assist to remove all soft metal for welding.
• Evaluate finished products and perform quality checks on products.
• Administer all welding activities such as riveting and welding small parts and finished products.
• Assemble old units and perform modification and repair work if required.
• Collaborate work with metal sheets and apply various insulation materials.

go to method of application »

Industries / Sector: Mining Company

Job Description

• We are looking for a skilled Machine Operator/Rigger(Dump Trucks, Wheel Loaders, BackHoe, Crane)to set up, maintain and operate machinery.
• You’ll ensure the interminable and efficient running of production.
• A great Machine Operator/Rigger is reliable and able to work with attention to detail and safety standards.

Job Responsibilities

• Set up machines(calibration, cleaning etc.) tostart a production cycle
• Control and adjust machine settings (e.g. speed)
• Monitoring and maintaining rigging/machines equipment.
• Setting, aligning, and leveling heavy equipment machinery.
• Selecting the appropriate rigging gear.
• Preparing equipment like.
• Inspecting rigging before final use.
• Maneuvering loads using heavy equipment machinery and by hand.
• Inspect parts with precision and measuring tools
• Test operation of machines periodically
• Fix issues that might occur during the shift
• Check output to spotany machine-related mistakes or flaws
• Keep records of approved and defective units or final products

Job Requirements

• High School Diploma or equivalent; Technical Degree is a plus
• Proven experience as a Machine Operator/Rigger (Dump trucks, Wheel Loaders, BackHoe), Crane)
• Understanding of production procedures
• Attention to detail

go to method of application »

Industries / Sector: Mining Company

Job Responsibilities

• Manage all accounting transactions
• Prepare budget forecasts
• Publish financial statement in time
• Handle monthly, quarterly and annual closings
• Reconcile account payable and receivable
• Ensure timely bank payments
• Compute taxes and prepare tax returns
• Manage balance sheets and profit/loss statements
• Reports on the company’s financial health and liquidity
• Audit financial transactions and documents
• Reinforce financial data confidentiality and conduct database backups when necessary
• Comply with financial policies and regulations
• Tracking payments to internal and external stakeholders
• Preparing budget forecasts

Job Requirements and Qualification

• Minimum of B.Sc / HND in Accounting
• Must have at least 2- 5 years’ experience in a related role
• Experience with usingaccounting with TALLY (ERP Software) is a must
• ICAN/ACA certification is a plus
• Must reside around Job location and its environs
• Good knowledge of accounting
• Knowledge of key financial standards
• Strong analytical skills
• Excellent communication skills (Written and Oral)
• Analytical skills

Salary
N80,000 - N150,000 Monthly.