Job Openings at INTECH Process Automation

DESCRIPTION

• Checking protection settings in soft start and Variable Speed Drive (VSD) control units.
• Carry out firmware upgrades in soft start and Variable Speed Drive (VSD) control units as required.
• Propose the modifications required for the safe and reliable operation of the Soft Start and Variable Speed Drive (VSD) units.
• Provide SOW and Bill of materials required to execute the modification.
• Upon COMPANY approval, the Specialist shall supervise the execution of modifications.

REQUIREMENTS

• Bachelors in Electrical, Instrumentation & Control System Engineering.
• Minimum 10 Years of experience in the installation, troubleshooting, repair, modification, configuration/setting change, testing, commissioning, and startup of MV / LV Soft Starters, and Variable Speed Drive Units.
• Must have knowledge of Soft Starters, and Variable Speed Drive Units ( Rockwell & VECON ).
• Good interpersonal skills and exposure/experience to Offshore platforms.
• Strong written and verbal communication skills.
• Willing to work on short-term (2 weeks) - medium-term (6 months) commissioning/services

go to method of application »

DESCRIPTION

• Supervise the UPS and Battery charger major maintenance and or repair activities.
• Supervise testing of UPS and Battery charger units.
• Supervise Battery bank Discharge tests as per COMPANY procedure.
• carry out the modifications in power and control components as per COMPANY’s instructions.

REQUIREMENTS

• Bachelors in Electrical, Instrumentation & Control System Engineering.
• Minimum 10 Years of experience in the Installation, troubleshooting, repair, modification, configuration/setting change, testing, commissioning, and startup of UPS Units, and Battery Chargers and Rectifiers.
• Must have knowledge of UPS Units ( Cyberex / CHLORIDE )
• Good interpersonal skills and exposure/experience to Offshore platforms.
• Strong written and verbal communication skills.
• Willing to work on short-term (2 weeks) - medium-term (6 months) commissioning/services

go to method of application »

DESCRIPTION

• Protective relay testing as per COMPANY supplied Test procedures and provide test sheets.
• Wiring changes required for relay testing in protective circuits and record the changes and normalize the changes after testing. Wires shall be provided by COMPANY.
• Integrity tests and performance tests for potential transformers and current transformers as per COMPANY supplied Test procedures.
• Firmware upgrades to protective relays as required.
• Protection settings uploaded as per the latest relay setting Table.
• Modifications in power and control components as per COMPANY’s instructions.

REQUIREMENTS

• Bachelors in Electrical, Instrumentation & Control System Engineering.
• Minimum 10 Years of experience in the Installation, troubleshooting, repair, modification, configuration/setting change, testing, and certification services of Relays and Current Transformer / Potential Transformer
• Good interpersonal skills and exposure/experience to Offshore platforms.
• Strong written and verbal communication skills.
• Willing to work on short-term (2 weeks) - medium-term (6 months) commissioning/services

go to method of application »

DESCRIPTION

• This position initially offers 01-year contract (Extendable).
• As a Sr. Engineer HVAC (Heating, Ventilation, and Air Conditioning), you will be responsible for;
• Providing technical expertise and support and delivering requirements for CSU in accordance with industry best practices.
• Supporting and advising punch listing of systems and closeout of punch list items.
• Execution of the Commissioning & Start-Up Plan and Commissioning Execution Plan.
• Providing input to Commissioning Procedures, including Systems Testing Procedures.
• Assisting and contributing to Flawless start-up.
• Supporting the Project to Asset Handover strategy to align with Operations handover requirements.
• Providing quality assurance and coaching on systems acceptance and punch listing activities undertaken by the Operations team.
• Participating in peer reviews on startup and operating procedures.
• Working closely with Project and Operations personnel to meet the commissioning and start-up milestones.
• Liaisoning with the Company's project and contractor teams.
• Ensuring risks to the CSU schedule are identified and raised early.
• Assisting to Produce punch lists, acceptance documentation, and site and technical queries.
• Assisting to ensure close out of outstanding work and punch items, prior to systems being accepted for commissioned.
• Providing input to the CSU Safety Strategies and promoting safe practice for personnel and safe operation of production assets.
• Working daily in the operating worksites, leading improvements by maintaining full compliance with PPE and safety standards in challenging conditions.
• Ability to work effectively with all different functions in the JV and with Project Teams.
• Obtaining equipment maintenance information including status, results, etc., in a site with minimal original construction or maintenance records.
• Physically challenging working environment.
• SimOps support.

REQUIREMENTS

• Technical Certifications, 10+ years experience in the gas and oil industry, minimum 5 years in a senior position, CSU experience essential.
• Good technical communication skills.
• Ability to interact with members of projects, contractors and the Company's asset teams.
• Capable of giving direction and guidance on CSU planning & reporting.
• Good understanding of HVAC systems, facility integrity and Process Safety.
• Good understanding of commissioning, and startup.

go to method of application »

About The Position

• Supervise the generator's major overhaul and or repair activities.
• Supervise the testing and commissioning activities of the Generators.
• Propose the modifications required for the safe and reliable operation of the generators.
• Provide SOW and a Bill of materials required to execute the modification. Upon COMPANY approval, the Specialist shall supervise the execution of modifications.
• Study the power system operation and control system of generators and provide the modification required in the control system.
• Execute the modifications required in the control system upon COMPANY approval test the modification for successful implementation and provide a report on the modifications executed.

Requirements

• Bachelors in Electrical, Instrumentation & Control System Engineering.
• Minimum 10 Years of experience in the Installation, overhaul, repair, tuning, troubleshooting, repair, modification, configuration/setting change, testing, commissioning, and startup of Steam & Critical Power Generators
• Must have knowledge of GE turbine Generators and MUSTANG/CATERPILLAR Critical Power Generators
• Good interpersonal skills and exposure/experience to Offshore platforms.
• Strong written and verbal communication skills.
• Willing to work on short-term (2 weeks) - medium-term (6 months) commissioning/services

go to method of application »

About The Position

• Supervise the major maintenance and or repair activities of Switchboards and Motor Control centers.
• Supervise the testing and commissioning activities of the Switchboards and Motor Control centers.
• Propose the modifications required for safe and reliable operation of the Switchboards and Motor Control centers.
• Provide SOW and Bill of materials required to execute the modification. Upon COMPANY approval, the Specialist shall supervise the execution of modifications.
• Study the power system operation and control system of generators and provide the modification required in the control system.
• Execute the modifications required in the control system upon COMPANY approval test the modification for successful implementation and provide a report on the modifications executed.

Requirements

• Bachelors in Electrical, Instrumentation & Control System Engineering.
• Minimum 10 Years of experience in the Installation, troubleshooting, repair, modification, configuration/setting change, testing, commissioning, and startup of MV / LV switchboards, and MCCs, along with MV Motors.
• Must have knowledge of SwitchBoards and MCCs ( POWELL & Rockwell ) and MV Motors ( GE, SIEMENS)
• Good interpersonal skills and exposure/experience to Offshore platforms.
• Strong written and verbal communication skills.
• Willing to work on short-term (2 weeks) - medium-term (6 months) commissioning/services

go to method of application »

About The Position

• Supervise the Transformer's major overhaul and or repair activities.
• Assist in Transformer oil test procedures, Analyze the oil test results, and recommend the corrections required.
• Supervise the Transformer oil filtration activities.
• Supervise the testing of Transformer inbuilt protections.
• Propose the modifications required for safe and reliable operation of the Transformers.
• The specialist shall provide SOW and a Bill of materials required to execute the modification. Upon COMPANY approval, the Specialist shall supervise the execution of modifications.
• Execute the modifications required in the Transformers. Upon COMPANY approval test the modification for successful implementation and provide a report on the modifications executed. 

Requirements

• Bachelors in Electrical, Instrumentation & Control System Engineering.
• Minimum 10 Years of experience in the Installation, troubleshooting, repair, modification, configuration/setting change, testing, commissioning, and startup of MV, LV Transformers
• Must have knowledge of PROLEC Transformers
• Good interpersonal skills and exposure/experience to Offshore platforms.
• Strong written and verbal communication skills.
• Willing to work on short-term (2 weeks) - medium-term (6 months) commissioning/services

go to method of application »

About The Position

INTECH Automation Intelligence is looking for an energized and capable professional for the role of an ICSS Engineering Manager for a project that shall be executed in Lagos Nigeria, the primary objective of an ICSS Engineering Manager is to ensure overall responsibility for the technical delivery of the project within schedule.

• Resolves engineering problems by collecting and analyzing information; researching, analyzing, adapting, and modifying engineering techniques; recommending solutions; preparing drawings, schematics, and diagrams
• Maintains project progress by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; and escalating project completion impediments.
• Preparation of System Architecture consisting of Yokogawa CENTUM VP Release 6, Tricon CX/Tricon SIS, and 3rd party packages in line with TOTAL GS and project requirements
• Preparation of Cybersecurity specifications and requirements
• Supervises the IDC process to ensure that the engineering is done coherently
• Review drawings, schedules, specifications, and permits to ensure compliance with project requirements.
• Leads and reviews the Functional Analysis
• Leads the PTR3 Workshop and ensures close-out
• Works with project engineers to review engineering documentation and software applications for compatibility with existing plant philosophy and TOTAL GS-2021
• Communicates with the customer on all technical matters related to new I&C design and clarify the design with the customer
• Leads the technical reviews with CPY
• Ensure development and quality of Project technical documentation as per MDR. These documents include but not limited to ICSS Architectures, FDS, Standard Functions, IO Lists, Network Architectures etc.
• Leads the technical team in DVT, FAT, iFAT
• Leads the technical coordination with OEMs

Requirements

• Bachelor’s/Master's Degree in the engineering field professional experience of 15+ years minimum
• Minimum of 8-10 years of experience in international projects & engineering of Instrument & Control Systems in a similar role
• Working experience in TOTAL projects preferred.

Skills/Competencies

• Excellent verbal and written English
• Excellent leadership skills. Proactive approach required throughout the project.
• Good communication, presentation, persuasion, negotiation, and interpersonal skills
• Decision-making quality based on analysis, wisdom, experience, and judgment
• In-depth knowledge and understanding of project planning, process optimization, and information management systems. Excellent grip on project schedule, expediting measures are required.

go to method of application »

About The Position

INTECH Automation Intelligence is looking for an energized and capable professional for the role of an ICSS Project Manager for a project that shall be executed in Lagos Nigeria, the primary objective of a Project Manager is to ensure that the project is completed within the defined scope, time, cost, and quality constraints.

• Completely responsible for the Profit and Loss of the project
• Leading the management, claim, and progress meetings with customers and internal stakeholders.
• Project team selection and hiring
• Reviews progress reports
• Liaise effectively with procurement and keep a live procurement register. Reviews and approves all Purchase Orders and Subcontracts.
• Review of Customer comments on critical documentation along with respective discipline leads
• Manages subcontractors
• Financial visibility of the project. Maintenance of Financial control sheets.
• Ensure that all assigned projects are delivered with high-quality deliverables as per schedule, within the scope, and within budget
• Understand and confirm all contractual (commercial and technical) requirements of the project
• Developing project scopes and objectives, involving all relevant stakeholders, and ensuring technical feasibility
• Ensure effective resource utilization and allocation of project tasks. Perform/manage Team HRD to cover any skill gaps
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Prepare project plan/schedule using tools and processes adopted by INTECH and manage it during the execution of the project
• Manage project procurement with the support of the Supply chain/procurement department
• Use appropriate verification techniques to manage changes in project scope, schedule, and costs
• Develop project quality plan and perform quality assurance as well as quality control
• Measure project performance using appropriate systems, tools, and techniques as adopted by INTECH
• Report and escalate to the INTECH management and customer/End User/project stakeholders as needed
• Perform project closure
• Manage the relationship with the client and all stakeholders
• Perform risk management to minimize/mitigate project risks
• Establish and maintain relationships with third parties/vendors
• Watch the Company’s interest and ask for fair Change Orders, when appropriate. Maintain claim management and invoicing files.
• Observe Company Quality Management System (QMS) requirements

Requirements

• Bachelor’s/Master's Degree in the engineering field professional experience of 15+ years minimum
• Minimum of 8-10 years of project management experience in international projects & engineering of Instrument & Control Systems
• Working experience in TOTAL projects preferred.

Skills/Competencies

• Excellent verbal and written English
• Excellent leadership skills. A proactive approach is required throughout the project.
• Good communication, presentation, persuasion, negotiation, and interpersonal skills
• Decision-making quality based on analysis, wisdom, experience, and judgment
• In-depth knowledge and understanding of project planning, process optimization, and information management systems. Excellent grip on project schedule, expediting measures are required.

go to method of application »

About The Position

• INTECH Process Automation Nigeria Limited (IPANL) has been delivering industrial automation and control system solutions to Nigerian Oil & Gas, Petro-Chemicals for the past 20 years. IPANL is part of a multinational organization with having a strong worldwide presence.
• We are Vendor Neutral System Integrator providing solutions and services on major DCS/PLC/ F&G and SCADA systems.
• IPANL is looking for highly motivated, energetic, career-oriented, and skillful individuals to become part of its professional team.

*This position is for Nigerian National only*

Roles & Responsibilities:

• Hardware Designing & Implementation for Specialized Control Systems including DCS, SIS & FGS with expertise on Allen Bradley Systems. (Yokogawa & Foxboro system will be an advantage)
• Related experience on Wellhead Facilities including Wellhead Control Panels, Skids, Solar System will be an advantage
• Well Aware of/Have Conceptual Understanding of Major Industrial Standards being Followed
• Understanding of Major Instrumentation being Used and Clarity on the Working Principle
• Understands/Able to gather required Information from Customer Specifications (including Functional Requirement Specifications, P&IDs, C&Es, Drawings, Narratives, Philosophies etc.)
• Software Designing & Implementation, with Expertise on Allen Bradley PLC (Yokogawa & Foxboro System will be an Advantage)
• Have carried out System Testing & FAT
• Have been involved in Site Works including Installations Supervision, Commissioning & Startups Activities

Requirements

• Bachelor’s/Master Degree in engineering or in related field
• Minimum 5+ years of work experience in Industrial Automation & Controls Allen Bradley PLC (Yokogawa & Foxboro System will be an advantage)
• Hands-on Experience in Microsoft Office (Word, Excel, PowerPoint)
• Must have Effective Written/Verbal Communication Skills